EC10 - Energy consumption meter ELRO - Free user manual and instructions

Product Type	Plug-in Energy Consumption Meter
Brand	Elro
Model	EC10
Dimensions	Approx. 120 x 60 x 70 mm
Weight	Approx. 150 g
Power Supply	230V AC, 50Hz (plug-in)
Display	LCD screen with backlight
Measurement Range	0.2 – 3680 W (16A max)
Functions	Energy (kWh), power (W), voltage (V), current (A), frequency, power factor, cumulative time, cost calculation
Accuracy	±1% for power, ±0.5% for kWh
Overload Protection	Yes, audible alarm and display warning
Data Storage	Retains cumulative data on power loss (battery backup)
Battery Backup	1x CR2032 (for data retention)
Max. Current	16A
Max. Power	3680 W
Operating Temperature	0°C to 40°C
Standards	CE, RoHS compliant
Safety	Built-in fuse, overvoltage protection
Maintenance	Wipe with a dry cloth; avoid liquids
Spare Parts	Replacement battery (CR2032) available
Repairability	Not user-serviceable; contact support

Frequently Asked Questions - EC10 ELRO

How do I reset the cumulative energy reading?

Press and hold the SET button for 3 seconds until the display flashes. Then press the UP or DOWN button to reset to zero.

Can I use this meter with a 110V appliance?

No, the Elro EC10 is designed for 230V AC systems only. Using it with 110V may damage the device.

What does the overload alarm mean?

When the connected load exceeds 3680W, the meter sounds an alarm and displays 'OVERLOAD'. Unplug the device immediately to prevent damage.

How do I set the electricity tariff for cost calculation?

Press SET and use the UP or DOWN buttons to adjust the cost per kWh (default is 0.00). Confirm by pressing SET again.

The display is blank. What should I do?

First, check if the appliance is plugged in and powered on. If the meter still shows nothing, replace the CR2032 battery inside the unit.

How accurate is the energy measurement?

The EC10 has an accuracy of ±1% for power readings and ±0.5% for cumulative energy (kWh).

Can I use the meter outdoors?

No, the meter is intended for indoor use only. Keep it away from moisture and direct sunlight.

What is the maximum current rating?

The maximum current is 16A. Exceeding this may cause overheating or damage.

How do I switch between display modes?

Press the MODE button repeatedly to cycle through power (W), cumulative energy (kWh), voltage (V), current (A), frequency (Hz), and power factor.

Does the meter have a backup battery?

Yes, it uses a CR2032 coin cell to retain settings and cumulative data when unplugged. Replace the battery if data resets on power loss.

USER MANUAL EC10 ELRO

Besides the unnecessary expenses that come with a TV, TFT or LCD in standby mode, there's also a minor fire hazard. Moreover, the operating life of a TV is shortened. The EC10 automatically switches a TV completely off and by simply using a standard remote control your TV can be turned on again.

CONTENTS OF THE PACKAGING (1)

a. Plug-in switch unit b. Infrared sensors

b. Infrared sensor

INSTALLATION

- Insert the switch unit (a) into a wall socket (2).

- Insert the TV plug into the unit (3). - Stick the infrared sensor onto the front of the TV (4).

- Stick the infrared sensor onto the front of the TV (4). - Manually activate the EC10 by pressing the button

on the switch unit (5).

- Turn on the TV by means of the switch on the TV (6)

- After watching TV.

the remote control.

- After approx. 3 mi switch off the TV

- Switching off manually (7) is done by pressing the

button on the switch unit (a).

- The LED turns off when no voltage is present.

- Aim the remote control of the TV at the infrared sensor, and press the power button (8).

- Aim the remote control at the TV to turn it on in the

usual way (9). Switching on manually (10) is done by pressing the

- Switching on manually (10) is done by pressing the button on the switch unit (a).

- The LED turns on when voltage is present.

TIPS

- Avoid unwanted switching on; install the sensor in

such a way that it doesn't receive signals from other remote controls.

- Do not connect more than 1 device to the EC10.

NED

EC10 STANDBY OFF

- Na circa 3 minuten

helemaal uit.

White STANLEY 2017 power plug with attached cable and brand logo (no readable text or symbols)

GB USER'S MANUAL

NE HANDLEIDING

1. BRIKRAVOTENTE

2 BROKSAVVISNER

DK BRUGSVEXLEDNI

PL PODRECZNIK UZ

RUS РУКОВОДСТВО

H HASZNELATI BT

ISO MANUAL UR UTTI

1. TELEPHONE STLE

SIX UHRVATELSKB P

HR UPUTSTVA ZA US

SLO PRIROCNIK ZA U

BEDEENUNGSANLEITUNG

F MANUEL DE L'UTILISATE

II.O. СВЪКОВОЛСТРО НА ПОТРЕЕМТЕЛ-