CD18HP - Drill Gamma - Free user manual and instructions

Product Type	Cordless Drill/Driver
Brand	Gamma
Model	CD18HP
Voltage	18 V
Battery Type	Lithium-ion
Chuck Type	Keyless, 1/2" (13 mm)
No-Load Speed	0-1400 rpm (variable speed)
Torque Settings	20+1 (drill mode)
Max Torque	30 Nm
Drilling Capacity (Wood)	30 mm
Drilling Capacity (Steel)	10 mm
Screwdriving Capacity	Up to 8 mm diameter screws
Weight	1.5 kg (with battery)
Dimensions (L x H)	200 x 200 mm
Charging Time	Approx. 1 hour
Battery Capacity	2.0 Ah (typical)
Maintenance	Clean with dry cloth; keep vents free of dust
Safety Features	Overload protection, lock-on button, safety trigger lock
Spare Parts Availability	Contact Gamma customer service or authorized dealers
Included Accessories	1 battery, 1 charger, double-ended bit, belt clip

Frequently Asked Questions - CD18HP Gamma

How do I change the drill bit?

Open the keyless chuck by turning it counterclockwise. Insert the bit and tighten by turning clockwise. Ensure the bit is centered.

How do I charge the battery?

Connect the charger to a power outlet. Insert the battery into the charger. The LED indicates charging status. Full charge takes about 1 hour.

What should I do if the drill doesn't start?

Check if the battery is charged and properly inserted. Ensure the trigger lock is disengaged. If still not working, contact Gamma support.

How do I adjust the torque?

Rotate the torque adjustment ring to the desired setting (1-20 for screwdriving, drill symbol for drilling). Higher numbers provide more torque.

Can I use the drill as a screwdriver?

Yes, select a low torque setting and use a screwdriver bit. The variable speed trigger allows precise control.

What materials can I drill?

The drill can handle wood up to 30 mm, steel up to 10 mm, and plastic. For masonry, use a hammer drill.

How should I maintain the drill?

Clean the exterior with a dry cloth. Keep ventilation slots free of dust. Lubricate the chuck occasionally with a light oil.

Is the battery interchangeable with other Gamma tools?

Yes, the 18V lithium-ion battery is compatible with other Gamma 18V tools from the same series.

What safety precautions should I take?

Wear safety goggles and ear protection. Do not use in wet conditions. Keep hands away from rotating parts. Disconnect battery when changing bits.

Where can I find spare parts?

Spare parts such as batteries, chargers, and chucks are available through Gamma customer service or authorized dealers. Use only original parts.

USER MANUAL CD18HP Gamma

Line drawing of a handheld electric drill with visible components and wiring (no text or symbols)

CD14.4HP / CD18HP

Accu-schroefboormachine 14.4 / 18 volt

Perceuse-visseuse sans fil 14.4 / 18 volts

CE

NL - INSTRUCTIES FR - MODE D'EMPLOI

DÉCLARATION DE CONFORMITÉ CE

Intergamma B.V.

Storkstraat 2

3833 LB Leusden