30430 - Paper shredder Dahle - Free user manual and instructions

Brand	Dahle
Model	30430
Product Type	Paper Shredder
Shred Type	Cross-Cut
Shred Size	4 x 30 mm
Sheet Capacity	8 sheets (70 gsm)
Bin Capacity	20 liters
Dimensions (H x W x D)	20 x 30 x 40 cm
Weight	6 kg
Power Supply	230 V, 50 Hz
Power Consumption	200 W
Noise Level	55 dB
Shreds Credit Cards	Yes
Shreds Staples	Yes
Auto Start/Stop	Yes
Reverse Function	Yes
Overheating Protection	Yes
Safety Lock	Yes
Maintenance	Oil blades every 30 minutes of use
Color	Silver/Black

Frequently Asked Questions - 30430 Dahle

What type of shred does the Dahle 30430 produce?

The Dahle 30430 is a cross-cut shredder, producing particles of 4x30 mm for enhanced security.

How many sheets can the Dahle 30430 shred at once?

It can shred up to 8 sheets of 70 gsm paper in one pass.

Can the Dahle 30430 shred credit cards and staples?

Yes, it can shred credit cards and staples without issue.

What is the bin capacity of the Dahle 30430?

The bin has a capacity of 20 liters.

How do I oil the Dahle 30430?

Apply shredder oil across the paper entry every 30 minutes of use to maintain performance.

What should I do if the shredder jams?

Use the reverse function to clear the jam. If necessary, unplug and remove paper manually.

Does the Dahle 30430 have overheating protection?

Yes, it has overheating protection that shuts off the motor to prevent damage.

Is the Dahle 30430 safe to use?

It features a safety lock to prevent accidental operation, especially important for households with children.

What are the dimensions and weight of the Dahle 30430?

Dimensions are approximately 20 x 30 x 40 cm (HxWxD) and it weighs 6 kg.

Can I shred continuous forms or sticky labels?

No, avoid shredding continuous forms, sticky labels, or plastic to prevent damage.

USER MANUAL 30430 Dahle

Line drawing of a rectangular waste bin with lid and base (no text or symbols)

30404

30406

30414

30422

30430

30434

GB Operating instructions

F Instructions de service

GB Place in a stable position

db Warning / Caution Attention / Prudent

F Attention / Prudence Atopify / Guideline

GB 2 people required

GB Keep long hair clear of machine

GB Keep neck-ties clear of machine

GB Keep bracelets clear of machine

F Attention, en cas de port de bracelet

GB Interference prohibited

CZ Leszhet co-nit ^9

PL

H. Tilos belenvúlnil

BLO Se5 niter je nevecevo

HR Zabraniano dirania unutra

OR Anonyming b/6.10.1.2017

GB Do not insert paper clips or staples

F N'introduire ni trombone, ni agrafe!

(1) No WKSOL SCHOOL, 102, MCDY

H. Ne tegelet de gen - very 1200000000

(50) Vstavljati ne smete niti pisarniskin niti spenjanih sponki

HR Ne uvoditi spajalice ili takence!

GR 179-200E EOG SANCE, NO DUCOPTINO

ND Nu introduceti agrafe sau capse!

JP

① No introduced discrete sau caseter.

(IIAE)

(1) 2017年1月1日

(2) 人

GB Warning! Automatic start

GB In Operation - Do not operate the shredder for a period of more than 5 minutes in no-load operation (operation without paper).

GB Automatic cut-out

panneili in laminato

rivestimento:

mediodenso

melammina

piccoli componenti:

GB Automatic cut-out after 20 minutes operation

GB Automatic cut-out for approx. 40 minutes when the machine overheats

OR Airquire skionence: 40 km/h or mair, an unpease being the quarking

RO Cecuclers autonata de ca. 40 min. in caz de sufranciare a aparatul

JAP

• Do not use in the vicinity of inflammable liquids or gases.
• Do not use in the vicinity of corrosion materials.
• Do not expose to the wet.
• Power supply must be accessible all the times.
• Disconnect power supply cord before servicing.
• Unit protection against short circuit relies on the building installation (max. 20A)

	30404=30406
	a = 875mmb = 531mmc = 486mm	a = 875mmb = 531mmc = 486mm
	=59,4kg	=59,4kg
	d = 3,9mm	d = 5,8mm
	DIN 32757S2	DIN 32757S2
	220 - 240 V100 - 120 V
	< 70 dB (A)
	30 - 32	40 - 42
	V = 117 I

30414=3	0422=304	30=30434
a = 875mmb = 531mmc = 486mm =62,4kg	a = 875mmb = 531mmc = 486mm[2WSA] =62,4kg	a = 875mmb = 531mmc = 486mmc = 486mm 4kg ==62	a = 875mmb = 531mmc = 486mmc = 486mm
d = 3,9mme = 40mmDIN 32757S3	d = 2mme = 15mmDIN 32757S4	d = 0,8mme = 12mmDIN 32757S5	d = 1mme = 4,7mmDIN 32757"S6"
220 - 240 V100 - 120 V
< 70 dB (A)
23 - 25	14 - 16	7 - 9	6 - 7
V = 117 ↓

220 - 240 V100 - 120 V
< 70 dB (A)
23 - 25
V = 117 ↓

When Image Matters.

graph TD
    A["Hand placing a ballot box"] --> B{Binary Check}
    B --> C["Stop button"]
    style A fill:#f9f,stroke:#333
    style B fill:#bbf,stroke:#333
    style C fill:#dfd,stroke:#333

graph TD
    A["Hand gesture"] --> B["5"]
    B --> C["20 min"]
    C --> D["Process Box with Paper"]
    D --> E["STOP"]
    E --> F["40 min"]
    F --> G["0°C"]
    G --> H["60-120°C"]
    H --> I["Stop"]

graph TD
    A["Document"] --> B{Error}
    B -->|Yes| C["OK"]
    B -->|No| D["Reject"]
    C --> E["Donor"]
    D --> F["Unmarked"]

pannelli in laminato

rivestimento:

mediodenso

melammina

piccoli componenti: