OR-FH12 - Heating ORION - Free user manual and instructions

Product Type	Fan Heater
Model	OR-FH12
Brand	ORION
Power Supply	220-240V~ 50Hz
Power Settings	0 (fan only), 1000W (warm), 2000W (hot)
Dimensions (WxDxH)	228 x 110 x 235 mm
Net Weight	0.85 kg
Gross Weight	1.0 kg
Color	White
Insulation Class	II
Heating Element	Ceramic
Temperature Control	Adjustable thermostat for constant temperature
Safety Features	Overheating protection with auto shut-off
Maintenance	Wipe with damp cloth; do not use solvents
Storage	Cool, dry place with humidity < 80%
Warranty	12 months from purchase date
Manufacturer	ORION Electronics Ltd, Budapest, Hungary
Country of Assembly	P.R.C. (China)
Compliance	EEC EMC and Low Tension Directives

Frequently Asked Questions - OR-FH12 ORION

How do I turn on the fan heater?

Insert the plug into the socket, turn the function adjust knob to the desired setting: fan only (cool wind), warm (1000W), or hot (2000W). The thermostat knob should be turned clockwise to the max position initially.

Can I use the heater in a bathroom?

No. The manual states a minimum distance of 1 meter from bath-tubs, showers, or swimming pools. It is not recommended for use in wet areas.

What should I do if the heater shuts off unexpectedly?

This is likely due to overheating. Switch off the appliance, unplug it, and let it cool down for about 10 minutes. Then plug it back in and switch on. If it remains off, contact after-sales service.

How do I clean the fan heater?

Turn off the heater and unplug it. Let it cool down completely. Wipe the exterior with a damp cloth. Do not use gasoline, acid, or alkali, and avoid splashing water into the appliance.

What is the maximum power consumption?

The maximum power is 2000W. The heater also has a 1000W setting and a fan-only mode (0W).

Can I use an extension cord?

It is recommended not to use adapters or extension cords. If necessary, use one that complies with safety standards and ensure the power rating is not exceeded. Unwind the cord completely to avoid overheating.

How far should the heater be from walls?

Keep a minimum distance of 50 cm from walls and objects. Avoid placing the heater closer than 15 cm to corners.

Does the heater have a safety cut-off?

Yes, the heater is equipped with a safety device that disconnects it in case of overheating. After cooling, the heater can be reset by turning it off and on again.

What is the warranty period?

The warranty period is 12 months from the date of purchase, excluding time spent at service center. Warranty is valid if the warranty card is correctly filled.

Where can I find the user manual?

The user manual is included in the package and can also be downloaded for free in PDF format from the manufacturer's website or from notice-facile.com.

USER MANUAL OR-FH12 ORION

220-240V\~50Hz

DEAR CUSTOMERS!

MANY THANKS FOR BUYING ORION FAN HEATER!

We really believe you will get the greatest pleasure from using this device for the years!

Please, read the user's guide in detail before first using of this ceramic fan heater.

CAUTION

1. Read and save this instruction manual for further reading.
2. Remove the packing and make sure that the appliance is intact. The appliance must be intact without visible damages which could be caused by transport. In case of doubt, do not use it and contact our After-Sales service. Do not leave packaging materials like plastic bag, foam polystyrene, buttons and staples within reach of children.
3. Before connecting the appliance check if the electrical voltage and frequency of the circuit correspond to those indicated on the appliance.
4. In case there is incompatibility between the plug and the outlet, let the outlet replaced with another suitable one by a skilled electrician. He must be sure that the wire section of the outlet is fit to the appliance absorbed power. In general you are suggested not to use adapters, multiple outlets and/or extension cords.
   In case they must be used, only simple or multiple adapters and extension cords complying with the current safety rules in force must be used, paying attention that the capacity limit referring to the current value is not exceeded which is marked on the simple adapter or on the extension cords as well as the one of the max capacity, which is marked on the multiple adapter.
5. Use the appliance only for the mentioned purpose, namely for heating for domestic use.
   Do not use it for any other application as it could get dangerous.
   The manufacturer is not responsible for any eventual damages caused by improper or faulty use.
6. The use of every electrical appliance calls for the awareness of some basic rules, such as:
7. Never touch the appliance with wet or damp hands or feet.
8. Never use the appliance with bare feet.
9. Do not use extension cords in rooms with bath or shower unless you adopt particular prudence.
10. Never unplug the appliance by pilling the power cord or the appliance and never expose the appliance to atmospheric conditions (rain, sun, etc.)
11. Never let the appliance be used by children or unable people without supervision.
12. Before cleaning the appliance or carrying out any maintenance switch off the whole system or disconnect the appliance.
13. If the appliance malfunctions or is out of work switch it off without tampering it. If any repair is required please contact only the after-sale centre approved by the manufacturer and ask for original spare parts. Otherwise safety of the appliance can be compromised.

14. When the appliance is not in use switch it off and unplug it .Make harmless the parts of the appliance which could be handled hazardously by children for playing.

15. Check that the electrical capacity of the plant and the current outlets are adequate to the max power of the appliance indicated on the rating label. .In case of double address to a qualified and skilled workmen.

16. To avoid overheating risks you are recommended to unwind completely the extension cord.
17. The appliance must not be unnecessarily plugged in. Switch it off and unplug it when you do not use it.
18. Do not obstruct the ventilation or heating louver.
19. Keep a minimum distance of 50cm from walls and objects avoiding that the air flow is directed towards them. Avoid that between the appliance and the wall corners there is a distance which is lower than 15 cm.
20. The power cord must not be replaced by the user .In case of cord damage address to an after sale service recommended by the manufacturer.
21. Avoid warm contact check that the cord is not in front of warm air outlet grille.
22. Do not use the appliance near bath-tubs, showers, wash-basic or swimming-pools (minimum distance 1 meter).
23. Use the appliance in horizontal position.
24. Keep cleaning the exhaust grille.
25. Never install and use the appliance immediately below a fixed outlet.
26. Do not use the appliance near liquids or inflammable matters.
27. The appliance conforms to EEC EMC Directive No.89/336+92/31+93/68 and 72/23+93/68 Low Tension (LT) Directives.

OPERATION

1. Insert the plug into the socket, put on the power and indicator light is showed. The machine is ready.
2. Turn the constant temperature knob to the max position clockwise (to the bottom)
3. Turn the function adjust knob to " "switch then cool wind is out.
4. Turn "Function adjust knob" to "\~" switch then warm wind is out its frequency is 1000W.
5. Turn "Function adjust knob" to "≈" switch then hot wind is out and its frequency is 2000W.
6. Turn "Function adjust knob" to "0" switch. Then it stops works and be ready.

CONSTANT TEMPERATURE CONTROL

Turn the thermostat knob clockwise up to the highest position. Select the speed turning the knob clockwise (see OPERATION). When the wished temperature is attained turn the thermostat counter-clockwise slowly until the appliance is switched off (the pilot lamp is off). The ambient temperature is automatically maintained. If you turn the thermostat knob clockwise and you reach the highest position your fan heater will continuously work.

SAFETY DEVICE

This appliance is provided with a safety device disconnecting the appliance in case of overheating.

To deactivate the safety device switch off the appliance and unplug it until it gets cold (about 10 minutes). Plug it again and switch it on.

If the appliance is still off, plug it and bring it to our after sale service.

MAINTENANCE

1. Turn function adjust knob to "0" switch and turn off the power.
2. Pull out the plug
3. Make it cool down.
4. Rub it with damp cloth; do not splash water into it.
5. Do not rub with gasoline, acid and alkali, in order to avoid fade and damage appearance.
6. When it is stored, it should be cooled and put in the box and in a dry, ventilation place.

TECHNICAL DATA

Fan heater: ORION OR-FH12
Voltage: AC220-240V~ 50Hz
Power: 16/1000/2000W
Class of insulation: II
Color:	white
Dimensions: 228x110x235mm
Net/Gross Weight : 0,85kg/1.0kg

Terms and conditions of Good safe and efficient utilization

The place of storage should be inaccessible for direct sun rays, high humidity. Avoid mechanical damages of the device. Store this device in clean and dry room with humidity not higher than 80%.

Protect our environment: do not dispose of electrical equipment in the domestic waste.

Please return any electrical equipment that you will no longer use to the collection points provided for their disposal. This helps avoid the potential effects of incorrect dispose on the environment and human health. This will contribute to the recycling and other forms of reutification of electrical and electronic equipment. Information concerning where the equipment can be disposed of can be obtained from your local authority.

Warranty obligations of the manufacturer

Fan heater OR-FH12 conforms to the approved sample. This device is completely safe to use and doesn't make a harmful effect on the environment if the owner observes all the rules that are stated in this Instruction Manual. Warranty period for this device is 12 months from the date of purchase excluding the time spent in service center. The owner of the device has guarantee rights if warranty card is filled in correctly. Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased.

Name: ORION OR-FH12

Purpose: Fan heater

Assembled in P.R.C. under strict control of ORION Electronics Ltd

Developed by ORION Electronics Ltd

Address of the developer: 29 Jaszbereni st, Budapest 1106, Hungary, Europe

Manufacturing date: May 2011

Guarantee period: 12 months

Warranty service: "Foxtrot service", Kyiv, 44 Schuseva st.

Extra information on ORION company web-site www.orion.ua

We take your opinion and offers by E-mail [e-mail]