ZEROX 8 S-IF - Kitchen sink BLANCO - Free user manual and instructions

Product Type	Kitchen Sink
Brand	BLANCO
Model	ZEROX 8 S-IF
Material	Stainless Steel
Finish	Satin
Installation Type	Undermount
Number of Bowls	1
Bowl Shape	Rectangular
Dimensions (W x D x H)	78 cm x 48 cm x 22 cm
Cut-Out Dimensions	76 cm x 46 cm
Weight	Approx. 8 kg
Drain Included	Yes
Drain Diameter	3.5 inches (90 mm)
Sound Dampening	Yes (underside coating)
Base Cabinet Size	Minimum 80 cm
Certification	CE, ANSI/NSF 372
Warranty	Limited Lifetime
Cleaning Instructions	Use mild soap and water; avoid abrasive cleaners
Maintenance	Rinse after use; dry to prevent water spots
Country of Origin	Germany

Frequently Asked Questions - ZEROX 8 S-IF BLANCO

What type of faucet is compatible with the BLANCO ZEROX 8 S-IF sink?

Any standard kitchen faucet with a 1.5-inch or 3-hole configuration can be installed. The sink does not come with faucet holes, so consider a deck-mounted faucet or drill holes carefully.

How do I clean my BLANCO stainless steel sink?

Clean with a mild dish soap and warm water using a soft cloth or sponge. Rinse thoroughly and dry to avoid water spots. Avoid abrasive cleaners or steel wool to prevent scratches.

Is the sink resistant to stains and heat?

The 304 stainless steel construction offers good stain resistance and can withstand hot pots (up to 150°C). However, direct flame or extremely hot cookware may cause discoloration; use trivets.

What are the exact cut-out dimensions for undermount installation?

The recommended cut-out is 76 cm x 46 cm. Always verify with the provided template for precise measurements to ensure proper fit.

Does the sink come with a drain assembly?

Yes, the sink includes a 3.5-inch (90 mm) drain basket strainer. Additional strainers or garbage disposal flanges may need to be purchased separately.

Can I install a garbage disposal with this sink?

Yes, the sink is compatible with standard garbage disposal units. Ensure the disposal flange matches the 3.5-inch drain opening.

What is the minimum cabinet size required?

A base cabinet of at least 80 cm width is recommended to accommodate the 78 cm sink and allow for proper installation and plumbing access.

How do I remove scratches from the sink?

Minor scratches can be minimized using a stainless steel polish or by gently buffing with a fine abrasive pad in the direction of the grain. For deep scratches, professional refinishing may be needed.

Is the sink covered by warranty?

BLANCO offers a limited lifetime warranty for manufacturing defects. Register your product online and retain proof of purchase. Normal wear, improper installation, or misuse are not covered.

Can the sink be mounted as a drop-in instead of undermount?

The ZEROX 8 S-IF is designed for undermount installation. For drop-in, check if the rim is suitable; typically, BLANCO stainless steel sinks with a flat rim can be used top-mount with appropriate clips.

USER MANUAL ZEROX 8 S-IF BLANCO

BLANCO

BLANCO GmbH + Co KG

Edelstahl / Stainless steel

M 1:10

05/2009

zerox_8s-if_s_f_s

Subject to technical alterations

Most updated version under www.bbbanocore

1000187295