MW-1465 G - Kitchen scale Maxwell - Free user manual and instructions

Product Type	Digital Kitchen Scale
Model	MW-1465 G
Brand	Maxwell
Dimensions (approx.)	20 x 15 x 2 cm
Weight (scale only)	200 g
Power Source	1 x CR2032 battery (included)
Maximum Capacity	5 kg
Accuracy	1 g
Units	g, kg, oz, lb, ml (water), fl.oz (water)
Functions	Tare, Auto-off, Low battery indicator, Overload indication
Display	LCD, 4-digit
Platform Material	Tempered glass
Cleaning	Wipe with a damp cloth; do not immerse in water
Battery Replacement	Open battery compartment on bottom, replace with CR2032
Auto-off Time	Approx. 2 minutes of inactivity
Storage	Store in a cool, dry place
Spare Parts Availability	Contact Maxwell support for replacement batteries or parts
Reparability	Not user-serviceable except battery replacement
Included Accessories	1 x CR2032 battery

Frequently Asked Questions - MW-1465 G Maxwell

How do I replace the battery in my Maxwell MW-1465 G scale?

Turn the scale over and locate the battery compartment cover. Slide it open, remove the old CR2032 battery, and insert a new one with the positive side facing up. Close the cover securely.

Why does my scale show 'ERR' or 'EEEE'?

This indicates an overload. Remove the item from the scale immediately to avoid damage. The maximum capacity is 5 kg (11 lb).

How do I clean the scale?

Use a soft damp cloth to wipe the glass platform and plastic body. Do not use abrasive cleaners or immerse the scale in water. Dry thoroughly before next use.

Can I measure liquids with this scale?

Yes, the scale has a milk/water mode that converts weight to volume (ml or fl.oz) for water and milk. Select the mode using the UNIT button until the ml/fl.oz symbol appears.

How do I use the tare function?

Place an empty container on the scale and press the TARE button. The display will reset to zero. Then add the ingredient to the container; the weight shown will be the net weight.

Why does the scale turn off automatically?

To conserve battery, the scale automatically powers off after approximately 2 minutes of inactivity. Press the ON/OFF button to restart.

What units can I measure in?

You can toggle between grams (g), kilograms (kg), ounces (oz), pounds (lb), milliliters (ml) and fluid ounces (fl.oz) for water and milk. Press the UNIT button to cycle through.

How accurate is the scale?

The scale has an accuracy of 1 gram (0.05 oz) within the range of 1 g to 5 kg. For best results, place the scale on a flat, stable surface and calibrate if possible.

Can I use the scale on a soft surface?

No, for accurate readings always place the scale on a hard, flat, and level surface. Soft surfaces may cause inaccurate measurements.

What should I do if the display is dim or shows 'LO'?

The 'LO' indicator means the battery is low. Replace the CR2032 battery as soon as possible to ensure accurate readings.

USER MANUAL MW-1465 G Maxwell

РУССКИЙ

КУХОННЫЕ ВЕСЫ

The scale is used for weighing dry, liquid and

granular products

1. 2017, 1983

DESCRIPTION

1. Weighing platform

2. On/off/Tare button -ON/T-

3. Display

4. Measurement units selection button

5. Battery compartment lid

6. Non-slip silicone gasket

(No text)

RECOMMENDATIONS FOR CUSTOMER

ATTENTION

Before using the unit, read this instruction care-

fully. Keep this instruction for future reference.

Use the unit according to its intended pur-

pose only, as it is stated in this user manual

Mishandling the unit can lead to its breakage

and cause harm to the us

her property.

- Handle your scale with care, as it is a pre

cision instrument, do not subject it to hip

or low temperatures, high humidity, neve

expose it to direct sunlight and do not

drop it.

- Avoid getting of liquids into the scale bod

this unit is not waterproof. Do not store o

use the scale in a room with high humidit

(above 80%), make sure that scale does not

come into contact with water or other liquids

as this may cause failure of scale indication

or its damage.

• Do not put products in the bowl and on t

body of the unit, if their weight exceeds max.

capacity.

• This unit is not intended for usage by children

under 8 years of age.

• This unit is not intended for usage by people

(including children over 8) with physical, neu

ral and mental disorders or with insufficient

experience or knowledge. Such persons can

use this unit only if they are under superv

sion of a person who is responsible for their

safety and if they are given all the necessary

and understandable instructions concern-

ing the safe usage of the unit and inform

tion about danger that can be caused by

Improper usage.

- Do not leave children unattended. Do not allow children to use the wait as a day

allow children to use the unit as a toy. For children safety reasons do not leave only

- For children safety reasons do not leave poly

ethylene bags, used as a packaging, unat

Attention! Do not play children to play with

Attention: DO NOT ALLOW CHILDREN TO PLAY WITH

polyethylene bags of packaging mm. Danger of suffocation!

• Do not disassemble the unit by yourself.

DO NOT DISASSEMBLE THE CMI, BY YOUNSEL,

any malfunction is detected or after the d was dropped, apply to the nearest authorizer

was dropped, apply to the nearest, authorized

• Transport the unit in the original package

Transport the unit in the original package only.

- Keep the unit out of reach of children and die

Keep the unit out of reach of children and disabled persons.

able persons:

After unit transportation or storage under cold

(winter) conditions. it is necessary to keep it for

at least two hours at room temperature before

switching an.

• Wipe the unit body with a soft slightly damp

cloth.

- Wash silicone gasket (6) with warm water and

neutral detergent, rinse them and dry.

2017年1月1日

Battery installation

- Unpack the scale, remove any stickers that

can prevent unit operation.

- Remove th

and insert two 1.5 V «AAA» batteries (sup

plied with the unit), strictly following the

polarity.

• Install the battery compartment lid (5) back

to its place

Note:

• If there is an isolation insert in the battery

compartment, open the battery compaR-

ment lid (5), remove the isolation insert and

install the battery compartment lid (5) back

to its place.

[Non-Text]

Battery replacement

- When the batteries are low the display (3) will

show "Lo".

• Open the battery compartment lid (5),

remove the batteries, insert the new 1.5 V

«AAA» batteries, strictly following the polarity,

then close the battery compartment lid (5).

• If you do not use the scale for a long time

remove the batteries from the battery com-

partment.

[Non-Text]

Weighing ingredients

1. Place the scale on a flat horizontal surface.

2. Install silicone gasket (6) in the installation

place (1).

Note:

This model is supplied with non-slip silicone

gasket (6) that ensures the steadiness of the

bowl. install the gasket into the groove.

To switch the scale on press the button (2)

=ON/T=, the s

on the display.

Note:

The symbol “▲” indicates that the indications on

the display (3) have stabilized and you can start watching

weighting.

1. Select necessary weight measurement units

by pressing the button (4) , the fol-

lowing symbols will appear on the display (3):

-9- - weight of product(s) in grams:

=lb= — weight of product(s) in pounds;

— weight of product(s) in ounces;

«kg» — weight of product(s) in kilograms

te:

the indication on the display (3) is not equal

zero, press the «ON/T» button (2), the weight

tication on the display (3) will be set to zero.

Put the ingredient(s) on the weighing plat-

form(1). The weight of the ingredient(s) will

be shown on the display (3), according to the

selected me

ote:

e symbol «▲» indicates that the indication

e display (3) have stabilized and are final.

To switch the scale off remove the ingredi-

ents, press the button (2) »ON/T» and hold it

till the unit is switched off.

ote:

e scale will be switched off automatically after

minutes of non-operation.

[Non-Text]

re function

you want to measure the weight of several

gredients consequently without removing

evious ones, repeat the steps 1-8.

Place the scale on a flat surface.

Install silicone gasket (6) in the install

place (1).

Press the button (2) «ON/T» to switch

scale on, the symbols = -0- and * ▲

appear on the display.

ote:

The symbol «▲» indicates that the indica-

tions on the display (3) have stabilize

УКРАЇНСЬКА

КУХОННІ ВАГИ

On your own house playtime

Top: English 22 - 3 points

Гарантія