Tornado Classic - Toy Valley Dynamo - Free user manual and instructions

Product Type	Toy Spinning Top
Brand	Valley Dynamo
Model	Tornado Classic
Color	Multicolor
Material	Plastic
Dimensions	10 x 10 x 15 cm
Weight	200 g
Recommended Age	3 years and up
Power Source	Manual (pull string)
Functions	Spins, LED lights, sound
Usage	Indoor / Outdoor
Assembly Required	No
Maintenance	Wipe clean with dry cloth
Safety Warning	Choking hazard - small parts. Not for children under 3 years.
Spare Parts	Not available separately
Repairability	Non-repairable
Certifications	CE, EN71
Included Items	1 spinning top
Launch Mechanism	Pull string
Warranty	None
Country of Origin	China

Frequently Asked Questions - Tornado Classic Valley Dynamo

How do I launch the Tornado Classic?

To launch, hold the top firmly and pull the string quickly. The top will spin on its base.

Is the Tornado Classic suitable for children under 3?

No, it contains small parts and is a choking hazard. Recommended for ages 3 and up.

Does it require batteries?

No, it is manually operated via a pull string. No batteries needed.

How should I clean the toy?

Wipe with a dry cloth. Do not immerse in water as it may damage the internal mechanism.

What is the diameter of the base?

The base is approximately 8 cm in diameter.

Can it be used outdoors?

Yes, it can be used outdoors on a flat, smooth surface. Avoid grass or rough terrain.

Is the toy noisy?

It produces a low whirring sound while spinning, and may have sound effects depending on the model.

How long does it spin?

Spin time varies but typically ranges from 30 to 60 seconds with a good pull.

Are replacement parts available?

No, spare parts are not sold separately. The top is designed as a single unit.

What material is the Tornado Classic made from?

It is made from durable plastic and a small metal tip for spinning.

USER MANUAL Tornado Classic Valley Dynamo

Stylized logo featuring a soccer ball with a swirling ribbon, set against a red and black geometric background (no text or symbols)

Red and black sports equipment with ball tables and control panels (no visible text or symbols)

Black football table with multiple playing cards on the rim (no visible text or labels)

ASSEMBLY INSTRUCTIONS

Accessory Pack Contents

(part number) (qty)

• SOCCER LEG ASSEMBLY 4

- TWO MAN ROD (48 ^3/8 " long) 20606811 2

- THREE MAN ROD (43 ^3/8 " long) 20606821 2

• GOALIE ROD (41½" long) 20606831 2

- FIVE MAN ROD (38 ^7/8 " long) 20606841 2

- BEARING WRENCH (Elite only) 20515191 1

• MAPLE HANDLE 21706700 8

- ROD SUPPORT BLOCK (2 ^3/4 X 2 ^3/4 ) 1

• SOCCER BALLS 20515170 3

• SCORE POST 20515181 4

• #10 x 2½ SCORE POST MOUNTING SCREWS 20102490 4

• BLONDE SCORE DISK 21706640 5

- BLACK SCORE DISK 21706650 5

• SCORE POST ROD 20607500 2

- ROLL PIN PUNCH 21706670 1

- ROLL PIN 21706690 26

• BUMPER 20701060 16

• RULE BOOKLET 21706621 1

• SILICONE IN 2 oz. BOTTLE 988000125 1

Tools Required:

- SMALL HAMMER

• PHILLIPS SCREWDRIVER

- 9/16" BOX-END OR SOCKET WRENCH

- ALL-PURPOSE CLEANER (Fantastik, Formula 409, Windex or equivalent)

- CLEAN CLOTH

Contact your Distributor if any parts are missing or incorrect

1. Remove all parts and accessories from parts box and check against the enclosed list.
2. Turn the table upside down, taking care not to scratch or damage the top laminates or Corner Caps (best to assemble on carpet).
3. Remove the nuts and washers from each leg and insert the leg into the two diagonal holes in the bottom of the game.
4. Assemble the nuts and washers to the leg bolts and finger tighten. Make sure each leg is pulled squarely into the corner of the cabinet on all four sides before tightening with a wrench. Be careful not to over-tighten the nuts. Make sure the Leg Levelers are screwed in all the way.
5. Have at least two people set the table upright. Wipe it off with a damp cloth.

1. Thread the appropriate rods through the corresponding bearing hole (there are two rods with holes for three players – the SHORTER of these is the goalie rod. The LONGER is the actual “Three man rod”). Thread the rod through one side of the cabinet and wipe a thin coating of silicone on the rod using a cloth or paper towel. Thread one black rubber bumper onto the rod (make sure that the side of the bumper with the holes always faces the cabinet wall).

2. Thread the appropriate number of men onto each rod (smiling face of black men facing yellow goal and smiling face of yellow men facing black goal), followed by another rubber bumper on the far end. Slide the end of the rod into the bearing hole in the opposite cabinet wall.

IMPORTANT NOTE: This piece is not designed for use as a cupholder and will not hold a drink. Tornado strongly recommends never placing your drink here.

1. To secure the men, align the holes in each man with the holes in the rod. Using the rod support block or bearing wrench under the rod near the man, place the roll pin in the man hole (slot in the roll pin down toward the foot) and tap it through the man with a hammer, until it is flush on both sides

1. To remove the men, place the pointed end of the included roll pin punch into the roll pin and drive it out. The roll pins are reusable.
2. Mount the score assemblies at each end of the table.
3. Level the table by rotating the levelers on the bottom of each leg.
4. Lubricate the game at least once a month.

a. Wipe each rod with a clean dry cloth.
b. Pull the handle end of each rod out towards you and apply one drop of silicone to the top of the rod, approximately one inch from the outside of the game.
c. Continuously spin the rod while pushing it in and pulling it out of the game.
d. Remove any excess silicone with a clean soft cloth.