AWP1812 - Water filter PHILIPS - Free user manual and instructions

Product Type	Water Filter
Brand	Philips
Model	AWP1812
Dimensions (W x H)	304.8 mm x 35 mm
Weight	Approx. 0.5 kg
Material	Plastic (ABS)
Filtration Capacity	500 L
Flow Rate	3 L/min
Operating Water Pressure	0.1 - 0.4 MPa
Operating Water Temperature	5 - 38 °C
Applicable Water Source	Municipal tap water
Installation Type	Countertop (faucet connection)
Filtration Method	Activated carbon and ultrafiltration
Filter Replacement Indicator	No (manual tracking recommended)
Power Supply	None (mechanical filtration)
Safety Features	BPA-free materials, pressure relief
Maintenance	Replace filter every 500 L or 6 months
Included Accessories	Filter head, hose, connectors, user manual
Certifications	GB 3740-2006, Q/GSHD 020:2019

Frequently Asked Questions - AWP1812 PHILIPS

How often should I replace the filter in the Philips AWP1812?

The filter should be replaced after every 500 liters of filtration or every 6 months, whichever comes first. This ensures optimal water quality and flow rate.

Can I use the Philips AWP1812 with well water?

The AWP1812 is designed for municipal tap water. Using it with well water may require additional pre-filtration to avoid clogging the filter with sediment.

What is the maximum water pressure allowed?

The operating water pressure range is 0.1 to 0.4 MPa (1.0 to 4.0 bar). Exceeding this may damage the filter or cause leaks.

How do I install the Philips AWP1812 water filter?

Installation is straightforward: connect the filter to your faucet using the included adapters, then flush the system for 5-10 minutes before use. Refer to the manual for detailed steps.

Does the AWP1812 remove fluoride from water?

No, the standard activated carbon and ultrafiltration filter in the AWP1812 does not remove fluoride. For fluoride removal, consider a specialized filter.

What is the flow rate of the Philips AWP1812?

The flow rate is 3 liters per minute under normal water pressure.

Is the Philips AWP1812 dishwasher safe?

No, the filter and housing should not be placed in a dishwasher. Clean the exterior with a soft damp cloth only.

How do I clean the filter housing?

Turn off the water supply, disconnect the filter, and wipe the housing with a mild soap solution. Rinse thoroughly and reassemble.

What should I do if the water flow becomes slow?

Slow flow may indicate a clogged filter. Try flushing the filter for 5 minutes. If the problem persists, replace the filter.

Does the Philips AWP1812 come with a warranty?

Yes, Philips offers a limited warranty for this product. Please check your manual or contact customer support for details.

USER MANUAL AWP1812 PHILIPS

The content of this manual may differ from the actual product. Please refer to the actual product. If there are any updates to the product, we will not notify you separately. © 2020 AquaShield The Philips trademark and the Philips Shield Emblem are registered trademarks of Koninklijke Philips NV. used under license. This product has been manufactured by and is sold under the responsibility of Guangdong AquaShield Health Technology Company Limited and Guangdong AquaShield Health Technology Company Limited is the warrantor in relation to this product.

7 Installation diagram 9 Usage instructions