Road Mirror - Rearview Mirror Blackburn - Free user manual and instructions

Product Type	Road Mirror
Brand	Blackburn
Model	Road Mirror
Material	Plastic housing, glass mirror
Mounting Type	Handlebar clamp
Clamp Diameter	22-25 mm
Mirror Dimensions	2.5 x 1.5 inches (6.4 x 3.8 cm)
Weight	30 g (1.1 oz)
Adjustment	Ball joint, 360-degree rotation
Power Source	None (passive)
Main Functions	Rear view, blind spot reduction
Compatibility	Most road and hybrid handlebars
Installation	Tool-free, quick-release clamp
Cleaning	Mild soap and water; avoid abrasive cleaners
Maintenance	Periodically tighten clamp and clean mirror
Safety	Breakaway design to prevent injury on impact
Spare Parts	Replacement mirror heads available separately
Repairability	Limited; replace entire unit if damaged
Warranty	2 years limited

Frequently Asked Questions - Road Mirror Blackburn

How do I install the Blackburn Road Mirror on my handlebars?

The mirror uses a tool-free clamp. Position the clamp on the handlebar, tighten the screw by hand until snug, then adjust the mirror angle using the ball joint.

Can the mirror be mounted on the left side?

Yes, the clamp is reversible and can be mounted on either side of the handlebar for left- or right-hand traffic.

What size handlebars are compatible?

The clamp fits standard road handlebars with diameters from 22 to 25 mm. It may not fit oversized or aero bars.

Is the mirror glass or plastic?

The mirror is made of glass for clear reflection, housed in a durable plastic body.

How do I clean the mirror without scratching it?

Use a soft cloth with mild soap and water. Avoid paper towels or abrasive cleaners that can scratch the glass.

Does the mirror vibrate at high speeds?

The ball joint and clamp are designed to minimize vibration, but some movement may occur on rough roads. Tightening the clamp can reduce it.

Is the mirror waterproof?

Yes, the mirror is weather-resistant and can withstand rain. However, prolonged submersion is not recommended.

What is the weight of the mirror?

The Blackburn Road Mirror weighs approximately 30 grams (1.1 ounces), making it lightweight for road cycling.

Can I replace only the mirror head if it breaks?

Replacement mirror heads are sold separately. If the clamp is damaged, the entire unit should be replaced.

Does the mirror have a breakaway feature for safety?

Yes, the mirror is designed to break away upon impact to reduce the risk of injury during a crash.

USER MANUAL Road Mirror Blackburn

Fits On Road Bike Brake Hoods

Part# 2041496

STEP ONE: Remove strap and spread curved ends of arm over hood.

STEP TWO: With buckle on the inside, wrap strap tightly around hood, through the buckle and then back around itself.

STEP THREE: Adjust mirror viewing angle while seated on bike.

STEP FOUR: To adjust, loosen mirror tension by holding mirror in one hand while rotating lock ring clockwise with the other hand. Hold mirror in place while retightening lock ring.

WARNING: Objects in the mirror are closer than they appear. Road vibrations or rough terrain may loosen ball joint or strap. Check tension frequently.

Visit us at blackburndesign.com for product updates.

Blackburn.

5550 Scotts Valley Drive, Scotts Valley, Ca 95066

Customer Service: 1-800-456-2355

Blackburndesign.com

Printed in China

LIFETIME

WARRANTY