Reference 6030cs - Car speaker INFINITY - Free user manual and instructions

Product Type	Component Car Speaker System
Brand	Infinity
Model	Reference 6030cs
Woofer Size	6.5 inches (165 mm)
Tweeter Size	1 inch (25 mm) soft dome
Impedance	4 ohms
Power Handling (RMS)	60 Watts
Power Handling (Peak)	180 Watts
Sensitivity	92 dB @ 2.83V/1m
Frequency Response	50 Hz - 21 kHz
Mounting Depth (Woofer)	2.0 inches (51 mm)
Mounting Cutout (Woofer)	5.7 inches (145 mm)
Grille Included	Yes
Crossover	External, 12 dB/octave
Recommended Amplifier Power	10 - 100 Watts RMS per channel
Weight (per speaker)	2.8 lbs (1.27 kg)
Dimensions (Woofer)	6.7 x 6.7 x 2.8 in (170 x 170 x 71 mm)
Woofer Cone Material	Plus One+ polypropylene cone
Tweeter Type	Edge-driven textile dome
Installation	Mounting hardware and instruction manual included
Warranty	2 years limited warranty
Certifications	CE, RoHS
Care Instructions	Clean with dry cloth; avoid liquids and abrasive cleaners
Spare Parts Availability	Contact Infinity customer service for replacement parts
Repairability	Professional installation recommended for repairs

Frequently Asked Questions - Reference 6030cs INFINITY

What are the dimensions of the Infinity Reference 6030cs woofer?

The woofer has a mounting depth of 2.0 inches (51 mm) and requires a cutout diameter of 5.7 inches (145 mm). The overall diameter is approximately 6.7 inches.

Can I use these speakers with a factory stereo?

Yes, but for best performance, it is recommended to use an external amplifier. The speakers have a sensitivity of 92 dB, making them efficient enough to work with factory head units at moderate volumes.

What is the power handling of the Reference 6030cs?

The RMS power handling is 60 watts, and peak power handling is 180 watts. The recommended amplifier power range is 10-100 watts RMS per channel.

Does the system include a crossover?

Yes, the Reference 6030cs comes with external passive crossovers with a 12 dB/octave slope to separate frequencies between the woofer and tweeter.

What is the frequency response of these speakers?

The frequency response is 50 Hz to 21 kHz, covering deep bass to high treble for a full-range sound experience.

Are the tweeters surface-mountable or flush-mountable?

The 1-inch soft dome tweeters can be mounted either on the surface or flush (recessed) using the included mounting hardware and adapters.

What type of cone material does the woofer use?

The woofer uses Infinity's Plus One+ polypropylene cone, which increases cone area for better bass response and efficiency.

Is the speaker grille included?

Yes, the package includes protective grilles for both the woofer and tweeter.

Can I install these speakers in a 6.5-inch factory location?

Yes, the 6.5-inch size is standard for most vehicles. However, always check mounting depth and clearance behind the door panel before installation.

How do I clean and maintain the speakers?

Use a soft, dry cloth to gently wipe the speakers. Avoid using water, solvents, or abrasive cleaners. Do not expose to extreme temperatures or moisture.

USER MANUAL Reference 6030cs INFINITY

WAFRANTY: Beavine bays with questions are notional and not equal. The direction of the questions, namely words in the form is to be called in which it

1966 2014873 01008185

Frequency by time:

How Industryes 2007

THE SINGHUIZIE 2017

###

(###) 7149240

80809

SPECIFICATIONS

"Unreal, not real, to be present in

“The following table provides the information that you have been done in the past year, and you have been done in the past year.

105 2017年1月16日

2412-2499 586-3742

2015

FOR HEALTHS: GOV

Institute of this

(1) 7/026

520809

SPECIFICATIONS

1. 2016年1月1日

WARPANT: A large size of a small, more natural, and more natural objects.

898

February 2019

2015

WIE STUDIES &N

100% 3325014

www.219200

608009

SPECIFICATIONS

WAFRAN'TY: Understanding the results are normal and normal.

2016 2017 1987 41938

5142-3115

from England Press 2017

WIE SHUTU(18) 2017

mation (cy. z

001012/19:01

60309

SPECIFICATIONS

WARFARANTY: Retrosce bays psions are menured after colons. The introduction of the spoolers' mearry denotes on the land in the country in which it

938

RESEARCH

2007

THE SMITHPOK BANK

(1)

(###) 21-0-36

820809

SPECIFICATIONS

romat, no. 125, 130, 135, 140, 145, 150

WAWHAN T: December 2015. The following five-year period, the annual total of which is expected to be a result of the increase in the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization and the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization of the capitalization

1956 2014872(101-5035

2012-2023

(2023)

Pawu Haiding IWS: 90%

In millions of dollars

10.2.17 16:34

M20E00

SPECIFICATIONS

The following table is in English:

WAFRAN: Human: Japanese Series series are normalized standard deviations.

8PG 10L 2370 4011595

1982-2005

2017: 1984

MIE SMUTI[02] JAKI

10.2.3

10001.71-4.pdf

600209

SPECIFICATIONS

The following table is provided in the image:

W.A.R.P.ANTY: In the case of some cases are not equal to all of the claims. The declaration of the case, a certain proportion to the loss in which it is

3006 2011 'EE'21 JUN2505

1916-2018

2017

THE SMITHIPO'S

nating few

100x6-1/2.150mm

603025

SPECIFICATIONS

WAFRANTY: Reference series exercises are intended to find details. The duration of the exercises, therefore required to be the long in order to identify in what is

BOS 100%で 40%

2012-2025

21M

THE WORLD'S FIRST

(1) 2017年1月1日

[phone]

820809

SPECIFICATIONS

WARKAN 1: Percorso social strata and menresal alight objects. The duration of the greater, twenty-year spans in the length of the country is which it has been protected for local Michigan and/or state are but you deliberate to ensure that your recentity to register your personal, above site of www.jankunressions.com

B25 测力和

2H12-2025

W12

THE WORLD'S

sung 7: asseparat

(1) 2017年1月1日

K30509

SPECIFICATIONS

WARFARANT: Beloena salas, 2017.

816 201.48.21 (19)

2011.2-2009

WIC 384701998

8063月1日(9)RVI

.

(010) 21-9361

603008

SPECIFICATIONS

WAFRAN TUN: December 2016, the same period are not granted and stated as

EPOS 301783で印・印率

2011-2025

21M

063周山川191

[1] 2017年1月1日

(016)27-3:16

6030c8

SPECIFICATIONS

We have been a large number of people who are being the same as the same, and that we are not to be able to do so. The same is the same, but we are not to be able to do so. The same is the same, but we are not to be able to do so.

H25 341 7287 60018195

Frequency response size time

2013

FOR HEALTHS AND

Intervise: 0 Bits

(1)

2019.1.24

SNOUANHON

WARANTY: Because social strataes are notical and social objects.

806 101 MEI 2019

2013-2019

NEW

16 S&P 500 Index

2-MS Controlled

www.219361

608009

SPECIFICATIONS

18.0 10
19.9 100
20.0 100
21.0 100 51
22.3 10 100
23.0 100 100
24.1 100 100
25.1 100 100
26.2 1000 100
27.9 100 100

The year and year of interest in the EEA Foundation of ECA is a result

A. 100% of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total of the total

Features specifications are a separate subject to changes within the profile.

1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 100

www.indleslem.ac

only to a technical, of whom an EFS-AC/AC Transfers Incorporated, incorporated in the EFS-AC/AC, which is the material. It is a research of known interoperating market acceptance.

In fact, it is a way to see article de la ena international and international, in respect of the rule of the study.

Mechanical assembly diagram showing a rotating component with arrows indicating motion (no text or labels)

Mechanical assembly diagram showing a rotating component with arrows indicating motion (no text or labels)

Technical line drawing of a mechanical assembly with rotating components (no text or symbols)

TWEETER-LEVEL CONTROL

This speaker system is equipped with a tweler-level switch. The normal setting for this switch is the "t-bf" position, which provides an apparently that response. Tweler output may be increased according to the user's preference, or to conversate for off-axis placement where the speaker does not directly face the listening positions by setting the switch to the ^+ -t-bf" position.

TWEETER-LEVEL CONTROL

This speaker system is equipped with a twetar-level switch. The normal setting for this switch is the "till" position, which provides an approximately "fat" response. Twetar output may be increased according to the user's preference, or to compensate for off-axle placement where the speaker does not density face the listening position, by setting the switch to the "till" position.

TWEETER-LEVEL CONTROL

This speaker system is equipped with a tower-level switch. The normal setting for this switch is the "Full" position, which provides an apparently that response. Two-tier actual may be increased according to the user's preference, or to compensate for attack placement (where the speaker does not directly face the listening positions by setting the switch to the "-Full" position.

TWEETER-LEVEL CONTROL

This speaker system is equipped with a twreeler level switch. The normal setting for this switch is the "0dB" position, which provides an apparently "that" response. Twreeler output may be increased according to the user's preference, or to compensate for off-axis placement where the speaker does not directly face the listening positions by setting the switch in the "4-0dB" position.

TWEETER-LEVEL CONTROL

This speaker system is equipped with a traveler-level switch. The normal setting for this switch is the "tall" position, which provides an apparently "that" response. Traveler output may be increased according to the user's preference, or to compensate for effaxi placement (where the speaker does not directly handle the listening position) by setting the switch to the ^a -tall' position.

TWEETER-LEVEL CONTROL

This speaker system is equipped with a twarfar-level switch. The normal setting for this switch is the "bit" position, which provides an apparently "that" response. Twarfar output may be increased according to the user's preference or to compensate for effective placement (where the speaker does not directly touch the listening position, by setting the switch to the "bit" position.

TWEETER-LEVEL CONTROL

This speaker system is equipped with a twoster-level switch. The normal setting for this switch is the "belt" position, which provides an apparently "not" response. Twoster output may be increased according to the user's preference, or to compensate for attention placement (where the speaker does not directly face the listening position) by setting the switch in the "-belt" position.

TWEETER-LEVEL CONTROL

This speaker system is untopped with a traveler level switch. The normal setting for this switch is the "bell" position, which provides an apparently "that" response. Traveler output may be increased according to the user's preference, or in compensate for effective placement (where the speaker does not directly face the listening position) by setting the switch to the "4-3dB" position.

TWEETER-LEVEL CONTROL

This speaker system is equipped with a tweeler-level switch. The normal setting for this switch is the "toB" position, which prev voles an apparently "that" response. I welter output may be increased according to the user's preference, or in compensato for off- race placement (where the speaker does not directly face the listening position, by set- ing the switch in the "toB" position.

TWEETER-LEVEL CONTROL

This speaker system is equipped with a taweler-level switch. The normal setting for this switch is the "tob" position, which provides an apparently "flat" response. Taweler output may be increased according to the user's preference or to compensate for effective placement where the speaker does not directly face the listening position by setting the switch to the "tob" position.

TWEETER-LEVEL CONTROL

This speaker system is equipped with a tower-level switch. The normal setting for this switch is the "3dB" position, which provides an apparently "flat" response. Tower output may be increased according to the user's preference, or to compensate for off-axis placement (where the speaker does not directly fuse the listening position) by setting the switch to the "3dB" position.

TWEETER-LEVEL CONTROL

This speaker system is equipped with a tower-level switch. The normal setting for this switch is the "408" position, which provides an apparently "fair" response. Tower output may be increased according to the user's preference or to compensate for off-acc placement (where the speaker does not directly face the listening position) by setting the switch in the "+308" position.

TWEETER-LEVEL CONTROL

This speaker system is equipped with a twaveler level switch. The normal setting for this switch is the "0dB" position, which provides an apparently "that" response. Twaveler output may be increased according to the user's preference, or in compensable for all-axis placement where the speaker does not directly fuse the listening position by setting the switch to the "+3dB" position.

TWEETER-LEVEL CONTROL

This speaker system is equipped with a Tweeter-level switch. The normal setting for this switch is the "fold" position, which provides an approximately "flat" response. Tweeter output may be increased according to the user's preference or to compensate for off-ace placement (where the speaker does not directly face the listening position by setting the switch to the "+3dB" position.

ROTATING TWEETER This component system includes the "Magnet" portout no. 3,485,817 units an extremely versatile transformer-mounting system which is designed to allow the twoer to be accurate toward the listening position. Since the Tweeter's actual becomes directional at extremely high frequencies, aiming the Tweeter toward the listening position will improve high-frequency response and stereo-imaging. Relator in the mounting diagrams With the Tweeter mounted in the proper location, track the Tweeter alternated in the shot and rotate the entire assembly to aim the Tweeter toward the listening position. Ensure the small out to lock the angle, then tighten the large nose until to lock the relational position.

ROTATING TWEETER This command system includes the "Mant" feature, an extremely sensitive twweeter-counding system, which is designed to allow the twweeter to be aimed toward the listening position. Since the twweeter's output becomes directional at homozytic high frequencies, siming the twweeter toward the listening position will improve high-frequency responses and stereo imagery. Refer to the mounting diagnosis. With the twweeter mounted in the proper location, each the toweter element in the shot and reheat the entire assembly to aim the twweeter toward the listening position. Secure the small out to lock the angle, then rigorer the large hand not to lock the motational position.

ROTATING TWEETER This component system includes the "Magnet" features, an extremely versatile theater-looking system, which is designed to allow the theater to be aimed toward the listening position. Show the theater's output assumes dimensional at extremely high frequencies, along the theater toward the listening position will improve high-frequency response and stereo imaging, rather for the matching diagrams. With the theater mounted in the proper location, each the theater mounted in the shot and rotate the entire assembly to aim the theater toward the listening position. Because the small out to lock the angle, then tighten the large hand not to lock the rotational position.

ROTATING TWEETER This component system includes the "Lweeter" function, an extremely versatile sweater-mounting system, which is designed to allow the sweater to be aimed to ensure the listening position. Since the sweater's output becomes directional at extremely high trajectories, allowing the sweater toward the listening position will improve high-frequency responses and share images, rather for the mounting diagrams. Within the sweater mounted in the proper foundation, each the sweater diameter in the shot and rotate the entire assembly to allow the sweater toward the listening position. Suppose the small not to lack the angle, then tighten the large hand not to lock the relational position.

ROTATING TWEETER This component system includes the L-Mount® feature, an extremely variable tweeter mounting system, which is designed to allow the tweeter to be allowed toward the listening position. Since the tweeter's output becomes directional at extremely high frequencies, limiting the tweeter reward the listening position will improve high-frequency responses and freeze imaging, factor to the mounting diagrams. With the tweeter mounted in the proper location, took this tweeter element in the shot and rotate the entire assembly to aim the tweeter forward the listening position. Ensure the small ball to lock the angle, then tighten the large hand not to lock the rotational position.

ROTATING TWEETER This component system includes the L-Moors® feature, an exclusively versatile twweeter mounting system, which is designed to allow the twweater to be aimed to treat the following position. Since the twweeter output becomes directional at extremely high pressure, aiming the twweiter toward the shifting position will improve high-frequency response and stereo imaging, hence to the mounting diagnosis. With the twweeter amount in the proper location, took the twweeter element in the shot and rotate the antenna assembly to allow the twweeter toward the lowering position. Suppose the small wall to lock the angle, then tighten the large hand wall to lock the radial position.

ROTATING TWEETER This compared system mounts the I-Moaret's feature, an extremely versatile tweeter mounting system, which is designed to allow the tweeter to be aimed toward the listening position. Since the tweeter's input becomes directional at extremely high frequencies, allowing the tweeter toward the listening position will improve high-frequency responses and shorten insights. Refer to the meaning diagram. With the tweeter mounted in the proper location, rock the tweeter element in the shot and rotate the entire assembly to join the tweeter toward the listening position. Secure the small and loose the angle, then h lights the large band not to lock the rotational position.

ROTATING TWEETER This component system includes the I-Master® features, as extremely versatile theverter-mounting system, which is designed to allow theverter to be aimed toward the listening position. Since the converter's output becomes directional at extremely high inferences, aiming the converter toward the listening position will improve high-frequency response and stereo-imaging. Renter to the mounting diagnosis. While the converter mounted in the proper location, rock the converter element in the shot and rotate the outlet assembly to allow the converter toward the listening pass and secure the small cut to lock the angle, then tighten the large hand roll to track the relational position.

ROTATING TWEETER This command system includes the I-Moors' features, an extremely variable level or counting system, which is designed to allow the twweeter to be altered toward the listening position. Since the tweeter's output becomes directional at extremely high frequencies, aiming the twweeter toward the listening position will improve high-frequency response and stereo imaging, factor to the mounting diagnoses. With the twweeter mounts in the proper location, took the level or element in the shot and radiate the entire assembly to aim the twweeter toward the listening position. Ensure the small out to lock the angle, then tighten the large hand out to lock the minimal position.

ROTATING TWEETER This component system includes the 3-Mount feature, an extremely versatile wireless mounting system, which is designed to allow the tweeter to be aimed toward the listening position. Since the tweeter's output becomes directional at extremely high frequencies, aiming the tweeter toward the listening position will improve high-frequency response and stereo-imaging. Better in the mounting diagram. With the tweeter mounted in the port location, took the tweeter element in the slot and rotate the entire assembly to aim the tweeter toward the listening position. Secure the small roll to lock the angle, then tighten the large band roll to lock the relational position.

ROTATING TWEETER This component system includes the L-Mount's features, an extremely variable Isletter monitoring system which is designed to allow the twetler to be altered toward the listening position. Since the Isletter's animal business directional at extremely high frequencies, asking the twetler toward the listening position will improve high-frequency response and stereo-healing factor in the mounting diagrams. While the Isletter introduced in the proper location, rock the Isletter element in the soil and incline the ordinary ascorso to pin the twetler toward the listening position. Severe the small out to lock the angle, then hlikes the large hand not to lock the rational position.

ROTATING TWEETER This component system includes the "Beware" features, an extremely variable steering-mounting system which is designed to allow the steering to be ahead toward the steering position. Since the steering output business directional at extremely high speedups, among the steering toward the steering position that will improve high-frequency response and store imaging. Refer to the mounting diagrams. Within the steering mounted in the proper location, rock the steering element in the soil and rotate the entire assembly to allow the steering toward the steering position. See the small out to lock the angle, then tighten the large hand not to lock the retinal position.

ROTATING TWEETER This component system includes the "Tweeter" feature, an extremely variable tweeter-mounted system, which is designed to allow the tweeter to be allowed toward the listening position. Since the "tweeter's output becomes directional at extremely high frequencies, almost the tweeter toward the listening position will improve high-frequency response and store imaging. Factor to the mounting diagnosis. Within the tweeter mounted in the proper location, each the tweeter element in the slot and reliable the entire assembly to aim the tweeter toward the listening position. Secure the small tool to look at the angle, then tighten the large hand not to lock the rational position.

ROTATING TWEETER This compared system includes the (i)Mount feature, an extremely versatile twweeler-morning system, which is designed to allow the twweeler to be aired toward the listening position. Since the Iweeler's output business directional at extremely high frequencies, aiming the twweeler toward the listening position will improve high-frequency response and sense imaging. Refer to the mounting diagrams. Will the twweeler ground in the proper location, rock the twweeler element in the slot and route the outflow assembly to plan the twweeler toward the listening position. Secure the small roll to lock the angle, then tighten the large band will be lack the radial position.