AFR4CC - Cable duct Panduit - Free user manual and instructions

Product Type	Rack Mount Cable Management Panel
Model Number	AFR4CC
Brand	Panduit
Rack Units	4U
Width	19 inches (483 mm)
Depth	6 inches (152 mm)
Height	7 inches (178 mm)
Weight	3.5 lbs (1.6 kg)
Material	Steel with black powder coat finish
Front Cover	Removable, ventilated
Cable Entry	Top and bottom brush strips
Mounting Type	19" rack mount with front and rear brackets
Compatibility	Standard EIA-310 racks
Maximum Cable Capacity	Up to 120 Cat6a cables
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Cleaning Instructions	Wipe with a dry cloth; do not use solvents
Warranty	5 years limited

Frequently Asked Questions - AFR4CC Panduit

What is the Panduit AFR4CC used for?

The Panduit AFR4CC is a 4U rack mount cable management panel designed to organize and route cables within a 19-inch equipment rack. It helps reduce cable strain and improves airflow.

What tools are needed for installation?

Installation requires a Phillips head screwdriver and rack screws (not included). The panel mounts directly to the rack rails.

Is the front cover removable?

Yes, the front cover is removable and ventilated for easy cable access and air circulation. It snaps on and off without tools.

Can the AFR4CC support fiber optic cables?

Yes, it can manage fiber optic cables as long as they are within the maximum cable diameter limit. Use appropriate bend radius protection.

What is the weight capacity?

The panel itself weighs 3.5 lbs, but it is designed to support the weight of the cables only. Do not use it to support heavy equipment.

Does it include mounting hardware?

No, mounting screws are not included. Use standard 10-32 or M6 rack screws suitable for your rack.

How do I clean the panel?

Clean with a dry, lint-free cloth. Do not use liquid cleaners or abrasives, as they may damage the powder coat finish.

Can it be mounted in a server rack with other equipment?

Yes, it fits standard 19-inch racks and can be placed between servers or patch panels for neat cable routing.

What is the warranty period?

Panduit offers a 5-year limited warranty against defects in materials and workmanship.

Is it RoHS compliant?

Yes, the AFR4CC is RoHS compliant and free from hazardous materials.

USER MANUAL AFR4CC Panduit

Raceway Channel	See Fig.	Electrical Cables			Data Grade Cables
		14	12	10	24 AWG		24 AWG		24 AWG
		THN/THWN/T90			Cat 6		Cat 6A		Cat 6A (SD)
		0.111	0.13	0.164	0.24		0.3		0.24
		Fill			Fill		Fill		Fill
		Max	Max	Max	Spec	Max	Spec	Max	Spec	Max
		UL Temp Rise Test			40%	60%	40%	60%	40%	60%
Outer Channels (with screws installed)	A	21	15	10	3	4	2	3	3	4
Inner Channels	B	24	17	11	3	5	2	3	3	5

Three circular diagrams showing different types of screw heads, with no text or symbols present.

Themountinghardwareusedtosecure theracewayshallbeappropriateforthe mountingsurface.

Screwsprovidedwithracewayare intendedforinstallationonaconcrete surface.

NOTES:

• An adhesive strip may serve only as a positioning aid during the installation process. The raceway shall be secured by mechanical fastening means.
• Holes for mounting raceway and associated fittings should be predrilled into infrastructure prior to the installation of the mounting hardware.
  •A5/32"concretedrillbitisneededfortheprovidedconcretescrews.

BASE&COVER

COUPLER

Pure technical line drawing of a mechanical assembly without any text, numbers, or symbols

Simple line drawing of a rectangular object with a circular element above it (no text or symbols)

Technical line drawing of a structural component with an arrow indicating direction (no text or symbols)

Staggerbase jointandcover couplingjointto strengthen assembly.

RIGHTANGLE

Technical line drawing of a multi-tiered mechanical component with screw holes and mounting holes (no text or symbols)

Diagram of a mechanical or structural assembly with two symmetrical components and directional arrows indicating flow or movement (no text or symbols)

Technical diagram of a layered structure with directional arrows indicating flow or movement (no text or symbols present)

Pure technical line drawing of a V-shaped component without any text, numbers, or symbols

TRANSITIONTOT70

Technical diagram showing a structural assembly with arrows indicating direction (no text or symbols present)

Technical line drawing of a mechanical assembly with numbered components (no text or symbols)

Technical diagram showing a mechanical assembly with directional arrows indicating movement or force (no text or symbols present)

Technical line drawing of a vertical structural component with a base and side panel (no text or symbols)

ENDCAP

1a
Ensureendcapandcoverarefullyengagedasshown.0.3"ismaximumallowabledistancebasecanextendbeyondcoverwheninstalling cap.

Line drawing of a rectangular metal frame with internal grooves, labeled with number 2 (no text or symbols on the frame itself)

JUNCTIONBOX

1a
Ensureendcapand coupler(s)connectto junctionboxcoveras shown[8places]
Note: JunctionBoxcanbeassembledbetweenworacewaypathswiththeuseoftwocouplerfittings. Endcapinstallationsshownasreference.

②

Technical line drawing of a mechanical assembly with a bracket and mounting base (no text or symbols)

③

Technical line drawing of a metal beam assembly with mounting holes and structural supports (no text or symbols)

BREAKOUTSFORCONDUITAPPLICATIONS

DIVIDEDINSERTAPPLICATIONPOWER/DATAAPPLICATIONDATAAPPLICATIONPOWERAPPLICATION

4

5

6

Technical line drawing of a mechanical device with a control panel and roller assembly (no text or symbols)

Technical line drawing of a mechanical component with a rectangular base and four circular top ports (no text or symbols)

WALLTRANSITION

GREENFIELDAPPLICATIONS-NEWCONSTRUCTION

1/2"drywallapplication5/8"drywallapplication
Determine if you will use 1/2" or 5/8" drywall. Orient standoffasshownfordesiredapplication.
lfinstallingintoexistinginfrastructure,continuetoBrownfieldapplicationinstructions.
Securebasetosoleboardandroute cablesandwiringasdesired.Donot overtightenscrewsasflooringinstallationmayrequireadjustments.
Adjustwalltransitionfittingbaseheight duringflooringinstallation.Afterdrywall andflooringhavebeeninstalled,secure transitionfittingbasetothefloorusing appropriatehardware.
ContinuewithStep4ofBrownfieldapplicationinstructions.

**OnlyusestandofforGreenfield applications**

BROWNFIELDAPPLICATIONS-EXISTINGINFRASTRUCTURE

Cutholeindrywallbetweenstudstothe dimensionsshown.

Technical line drawing of a mechanical component with an arrow indicating direction (no text or symbols)

Technical line drawing of a mechanical component with an arrow indicating direction (no text or symbols)

Simple line drawing of a bent metal bracket with a diagonal line extending from its side (no text or symbols)

TABLELEG

INSTALLATIONBETWEEN2RACEWAYCHANNELS

Technical line drawing of a structural support frame with columns and a vertical column (no text or symbols)

①

Centeroftablelegtransitionfittingwillsitapproximately3-1/4"fromtheedgeoftheracewaycover.
Routecablespriortoinstallingtheracewaycover.
NOTE: Desired hole in table should be offset from table leg center to accommodate proper mountingoftableleg.
Measuretheheight fromthefloortothe undersideofthetable. Channelshouldbe between3-1/2"to4" shorterthanthemeasuredheight.Ifnecessary,cutchannelfrom bottomedgetoaccommodate.

2

③

④

Securemountingbrackettotopofchannelusingprovidedhardware. Usethetopholeofthechannelforassembly.Donotfullytightenthe mountingbracketatthistime.

5

Technical line drawing of a mechanical device with no visible text or symbols

5A

Technical line drawing of a mechanical bracket assembly with mounting holes and a close-up inset showing a control panel (no text or symbols)

Ensurecouplersconnecttobottomtransition bootsasshown. [4Places]

6

Technical line drawing of a mechanical component with grid lines and a bracket (no text or symbols)

Routecablespriortoinstallingcovers.Coversaretamper-proof andarenotintendedforeasyremoval.
Assembletoptransitionbootstoeachother. Transitionbootlatcheswill mounttothesteppedflangesofthemountingbracket.
Ifaddedstiffnessisdesired,securebottomofchannelusingprovidedhardwareinthelowermostholesofthechannel.

11

Technical line drawing of a mechanical assembly with a vertical column and support structure (no text or symbols)

INSTALLATIONASSTANDALONEORWITHSINGLESIDERACEWAYCHANNEL

Technical line drawing of a table with columns and a vertical support structure (no text or symbols)

NOTE: For single side raceway application; above floor raceway should be mounted prior to table leg installation. Centeroftablelegwillsitapproximately3-1/4"fromtheedgeoftheracewaycover.Routecablespriorto installingtheracewaycover.

Line drawing of a simple table with a vertical metal column and base, no text or symbols present

NOTE: Desired hole in table should be offset from table leg center to accommodate proper mounting of table leg.

NOTE: Desired hole in table should be offset from table leg center to accommodate proper mounting of table leg.

©PanduitCorp.2019

INSTALLATIONINSTRUCTIONS

PN616B

4

Securemountingbracketstotopandbottomofchannelusingprovided hardware. Usetheholesclosesttotheendsofthechannelforassembly. Donotfullytightenthemountingbracketatthistime.

Pre-drillholesininfrastructureifnecessary.Secure bottommountingbrackettofloorwithproperhardware.(Concretescrewsprovided)

6

Ensurechannelislevel.Securetopmounting brackettoundersideoftableusingprovided hardware.

TransitionBootLatch

Assemblebottomtransitionbootstogether.Transitionboot latches(showninstep7)willmountosteppedflangesofthe mountingbrackets.Placebottomofchannelontopofcap-tureledgeoftransitionboots.
Tightenallmountingbracketscrewstothechannelatthis time.

Routecablespriortoinstallingcovers.Coversaretamper proofandarenotintendedforeasyremoval.

11

Line drawing of a simple table with four legs and a vertical column base (no text or symbols)