32CHH - Ceiling fan KDK - Free user manual and instructions

Product Type	Ceiling Fan / Ventilator
Brand	KDK
Model	32CHH
Voltage / Frequency	120V 50/60Hz, 127V 50/60Hz, 220V 50/60Hz
Power Consumption (Hi)	42.0–62.6 W (depending on voltage)
Power Consumption (Lo)	30.0–48.0 W
Speed (Hi)	616–736 rev/min
Speed (Lo)	470–588 rev/min
Air Delivery (Hi)	7.00–8.92 m³/min
Air Delivery (Lo)	4.92–6.67 m³/min
Power Factor (Hi)	92–98%
Power Factor (Lo)	81–91%
Weight	5.9 kg (approx.)
Safety Feature	Disconnect power before servicing; do not allow water into motor; do not use petrol, benzene, thinner for cleaning
Cleaning Instructions	Use a cloth dampened with kitchen detergent; wipe dry; do not immerse resin parts in water over 60°C
Maintenance	Routine maintenance every year; clean louver and fan body regularly
Included Accessories	Louver, mounting springs, duct adaptor

Frequently Asked Questions - 32CHH KDK

How do I install the KDK 32CHH ceiling fan?

Refer to the manual for detailed steps: connect the duct to the adaptor, secure with tape, install duct with a gradient to the outside for bathroom use, then adhere the ceiling plate to the flange leaving 2-5 mm space. Finally, mount the louver using the supplied springs.

What are the electrical specifications of the 32CHH?

The fan operates on 120V, 127V, or 220V at 50/60Hz. Power consumption ranges from 30.0W (low) to 62.6W (high) depending on voltage. Speed varies from 470 to 736 rev/min, and air delivery from 4.92 to 8.92 m³/min.

How do I clean the KDK ceiling fan?

Disconnect power first. Use a cloth dampened with kitchen detergent to clean the fan body, then wipe dry. For the louver, wash and clean it with water and detergent. Never use petrol, benzene, thinner, or immerse resin parts in water over 60°C. Do not allow water into the motor.

Can I use the 32CHH in a bathroom?

Yes, for bathroom installation, the duct should be installed with a gradient to the outside to prevent condensation and ensure proper ventilation. Follow the manual's instructions for duct connection.

What maintenance is required for the KDK 32CHH?

Routine maintenance should be performed every year. Clean the fan body and louver regularly. Check for any malfunctions during test run after power-on. Ensure the power is disconnected before any servicing.

Is the fan speed adjustable?

Yes, the fan has two speed settings: Hi and Lo. The specifications for speed and air delivery at each setting are provided in the manual.

How heavy is the KDK 32CHH?

The approximate weight is 5.9 kg (13 lbs). Ensure the ceiling mount can support this weight.

What should I do if the fan makes unusual noise?

First, check if the louver is properly attached. Ensure all screws and mounting springs are tight. If noise persists, inspect the fan blades for balance and clean any dust buildup. Contact a professional if needed.

Can I replace the louver or other parts?

Yes, the louver can be removed for cleaning or replacement. Use original KDK parts for compatibility. The manual does not list specific spare part numbers, but contact KDK service for assistance.

Where can I download the full manual for KDK 32CHH?

The manual is available for free download on notice-facile.com in PDF format. You can also request a translated version by selecting your language and providing your email on the same site.

USER MANUAL 32CHH KDK

Power cord connection

② Secure the condenser plate with screen. Asegure la placa del condenser con e tornile. E cannot be found to be a good object 用银行转账结算

S### to ### T##### ###

3

3

Duct connection and adhesion of ceiling plate

① Insert the duct into the adaptor and secure it with tape. (Suspend the duct from the ceiling so that no force is applied to the body enclosure.)

Meta el conducto en el adaptador y sujételo con cinta (Suspenda el conducto del techo de forma que no se aplique ninguna fuerza al armario del cuerpo). สอดท่ออากาศเข้าใบในที่ยิดตัวเชื่อมและยิดด้วยเทบ

■ Install the duct with a gradient to the outside.

Para utilización en cuartos de baño Instale el conducto con la pendiente hacia el exterior. เมื่อใช้ในห้องน้ำ. ติดตั้งท่ออากาศให้ลาดลงใบข้างนอก 管道倾斜地安装在外侧。

② Adhere the ceiling plate to the flange, leaving a space of 2 to 5 mm in between.

4

Test run and louver attachment

① When the power is turned on, check for malfunctions as follows:

② Insert the mounting springs into the slots and mount the louver to the body enclosure.

Disconnect power source before working on unit. Routine maintenance must be done every year.

CAUTION:

1. Never use petrol, benzene, thinner or any other such chemicals for cleaning the ventilating fan.
2. Do not allow water to enter motor.
3. Do not immerse resin parts in water over 60°C

AVISO:

③ Remove dust and dirt on fan body using a cleaner.

[Unreadable due to severe distortion and noise]

清洁器

[Unreadable]

② Wash and clean louver.

Illustration of hands washing a shower with a cloth, no text or symbols present

Using a cloth dampened with kitchen detergent, remove any dirt from fan body. Wipe dry with new cloth. Replace louver.

Line drawing of a hand cleaning a square ceiling fixture with a circular component (no text or symbols)

Model Modelo ृून型号 الموديل	[V]	[Hz]		Power consumption Consumo de potencia พลังงานไฟฟ้าที่ใช้功率 استهلاك الطاقة [W]	Speed Velocidadความเร็ว转速السرعة [rev./min]	Air delivery Caudal de aire การถ่ายอากาศ空气输送 Ice cream امداد الهواء [m3/min]	Power factor Factor de potencia ส่วนประกอบของหลังงาน功率因数 عامل القدرة [%]	Weight Peso น้ําหนัก重量 الوزن [Kg]
27CDG	120	50/60	Hi	21.7/25.8	498/505	4.50/4.58	93/93	4.7
			Lo	16.2/18.1	412/414	3.17/3.25	81/75
	127	50/60	Hi	24.2/28.9	515/520	4.67/4.75	93/93
			Lo	18.6/20.2	428/430	3.33/3.50	82/75
	220	50/60	Hi	23.0/26.0	479/485	4.42/4.50	97/95
			Lo	21.0/22.0	417/418	3.33/3.33	99/91
27CHG	120	50/60	Hi	30.0/34.3	607/612	5.67/5.75	98/97	4.9
			Lo	23.8/25.8	499/507	4.17/4.25	94/88
	127	50/60	Hi	33.2/38.5	628/637	5.83/6.00	98/98
			Lo	26.5/29.0	519/530	4.42/4.58	94/88
	220	50/60	Hi	28.0/33.0	565/580	5.50/5.75	94/94
			Lo	21.0/25.0	471/476	4.00/4.08	91/90
32CDG	120	50/60	Hi	42.0/46.6	616/583	7.00/6.83	96/95	5.9
			Lo	30.0/33.0	485/470	4.92/4.75	83/79
	127	50/60	Hi	46.3/52.2	647/619	7.50/7.25	96/95
			Lo	33.4/36.8	500/490	5.33/5.17	83/79
	220	50/60	Hi	44.0/50.0	618/599	7.00/6.83	92/91
			Lo	34.0/35.2	478/458	4.92/4.75	81/74
32CHG	120	50/60	Hi	56.0/63.0	734/716	8.75/8.58	97/97	6.3
			Lo	46.0/48.0	578/556	6.58/6.33	91/87
	127	50/60	Hi	62.0/69.0	769/750	9.25/9.08	97/95
			Lo	51.0/53.0	607/587	7.08/6.75	91/86
	220	50/60	Hi	57.0/62.6	736/720	8.92/8.83	98/94
			Lo	46.0/48.0	588/573	6.67/6.50	91/82
38CDG	120	50/60	Hi	88.5/102.0	650/641	10.83/10.67	99/98	9.6
			Lo	63.0/63.0	458/445	7.17/6.92	92/82
	127	50/60	Hi	98.5/113.0	681/676	11.50/11.17	99/97
			Lo	70.0/71.0	483/466	7.92/7.50	91/82
	220	50/60	Hi	90.0/98.0	645/628	10.67/10.50	99/98
			Lo	66.0/66.4	456/439	7.17/6.83	93/86
38CHG	120	50/60	Hi	121.0/139.0	779/757	13.08/12.92	99/97	10.3
			Lo	87.0/87.0	531/503	8.33/8.00	92/82
	127	50/60	Hi	134.5/155.5	804/804	13.75/13.75	99/96
			Lo	97.0/97.0	562/527	9.00/8.50	92/82
	220	50/60	Hi	122.0/138.0	790/760	13.33/13.17	96/98
			Lo	89.0/90.0	540/509	8.75/8.33	92/87