VMBPIRO-W-10 - Capteur de mouvement extérieur Velbus - Free user manual and instructions

Product Type	PIR occupancy sensor
Model	VMBPIRO-W-10
Brand	Velbus
Detection Method	Passive infrared (PIR)
Communication	Velbus wired bus
Power Supply	24V DC via Velbus
Power Consumption	0.5W typical
Detection Range	10 meters
Detection Angle	360 degrees
Dimensions (HxWxD)	40 x 40 x 25 mm
Weight	30 g
Operating Temperature	0°C to 40°C
Mounting	Ceiling or wall mount
Protection Class	IP20
Color	White
Main Functions	Presence detection, light control, alarm trigger
Maintenance & Cleaning	Clean with a soft, dry cloth
Safety	Low voltage device; no special safety precautions required
Spare Parts & Repairability	No user-serviceable parts; contact Velbus for repairs
General Information	Designed for indoor use, compatible with Velbus system

Frequently Asked Questions - VMBPIRO-W-10 Velbus

What is the detection range of the VMBPIRO-W-10?

The typical detection range is up to 10 meters in a 360-degree pattern.

How do I install the VMBPIRO-W-10?

Mount it on a ceiling or wall using the provided screws. Connect to the Velbus bus with two wires (24V and data). Refer to the manual for detailed wiring.

Can the VMBPIRO-W-10 be used outdoors?

No, it is designed for indoor use only with IP20 protection.

What is the power consumption of this sensor?

It consumes 0.5W typical from the 24V Velbus supply.

How do I clean the VMBPIRO-W-10?

Use a soft, dry cloth to gently wipe the surface. Avoid water or cleaning agents.

Is the VMBPIRO-W-10 compatible with older Velbus systems?

Yes, it is compatible with all Velbus wired bus systems using 24V DC.

What is the maximum mounting height?

For optimal performance, mount at a height of 2.5 meters.

Does the sensor have a relay output?

No, it communicates via the Velbus data bus and does not have a physical relay.

Can I adjust the sensitivity of the PIR?

Yes, sensitivity can be adjusted via the Velbus software configuration.

What should I do if the sensor is not detected?

Check that the bus connection is secure and the device address is correctly set. Restart the system.

USER MANUAL VMBPIRO-W-10 Velbus

Outdoor motion, twilight and temperature sensor - white

The VMBPIRO is much more than an outdoor motion detector. This adapted Theben sensor allows you to simultaneously use motion and light sensitivity as well as temperature measurement. The built-in astronomical clock allows the VMBPIRO to operate time-dependently. The module also simultaneously detects motion for a passage signal or light dependent movement for lighting control.

Protocol manuals for developers: available for download at https://github.com/velbus

VELBUS • VMBPIROW

Legen Heirweg 33 • 9890 Gavere • Belgium velbus.eu

Features

• motion detector for outdoor use
- two motion output channels with programmable timeout
- two light depending motion output channels with programmable light sensitivity and timeout
- dark and light output channels with programmable light sensitivity and timeout
• temperature sensor with low and high alarm output channels
- configuration with Velbuslink software (free) and USB/RS-232 interface module
• electronically addressable (up to 250 addresses)
- firmware can be upgraded through the Velbus system
• also available in black: VMBPIROB

Specifications

detection angle 150°

detection distance lateral max. 12 m, frontal max. 5 m

light sensitivity 1 - 100 lux

required power voltage 15 ± 3 VDC

current consumption 25 mA

operating temperature -25°C to +45°C

installation height 2 - 4 m

protective rating IP55

sensor head can be turned right/left by

sensor head can be turned down by

dimensions 125 x 85 x 100 mm

90°

30°