Scanstrut SC-AOB-A2 - Accessory

SC-AOB-A2 - Accessory Scanstrut - Free user manual and instructions

Find the device manual for free SC-AOB-A2 Scanstrut in PDF.

📄 38 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Scanstrut SC-AOB-A2 - page 9
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeMounting Bracket
BrandScanstrut
ModelSC-AOB-A2
Dimensions (L x W x H)150 x 100 x 50 mm
Weight0.5 kg
MaterialMarine-grade stainless steel
ColorBlack / Silver
Mounting TypeSurface mount
Compatible DevicesUniversal for most marine electronics
Maximum Load Capacity5 kg
Corrosion ResistanceYes
Waterproof RatingIPX6
Hardware IncludedScrews and mounting template
Installation TypeDIY – drill required
Adjustable AnglesYes, tilt and swivel
Vibration DampeningIntegrated rubber pads
UV ResistantYes
Cleaning InstructionsRinse with fresh water, mild soap
Replacement Parts AvailableYes, contact manufacturer
Warranty2 years limited

Frequently Asked Questions - SC-AOB-A2 Scanstrut

What is the SC-AOB-A2 used for?
The SC-AOB-A2 is a universal mounting bracket designed to securely attach marine electronics such as fish finders, GPS units, or radios to a boat surface.
Is the bracket compatible with all device sizes?
The bracket has adjustable arms and can accommodate devices up to 150 mm width and 5 kg weight. Check your device dimensions to ensure a snug fit.
How do I install the SC-AOB-A2?
Installation requires drilling pilot holes at marked positions, then securing the bracket with provided screws. A template is included. Use stainless steel fasteners for marine environments.
Is the bracket corrosion resistant?
Yes, it is made from marine-grade stainless steel and is treated for corrosion resistance. Rinse with fresh water after saltwater exposure.
Can I adjust the angle of the mounted device?
Yes, the bracket features tilt and swivel adjustments with locking knobs for optimal viewing angles.
What tools are needed for installation?
You will need a drill with appropriate bit size, a screwdriver (Phillips or flathead), and optionally a level for alignment.
Can this bracket be used on a kayak?
Yes, the bracket is suitable for kayaks, canoes, and other small watercraft. Ensure the mounting surface is flat and strong enough to support the load.
How do I clean and maintain the bracket?
Rinse with fresh water and wipe dry. Use mild soap for stubborn dirt. Avoid abrasive cleaners. Lubricate moving parts occasionally with silicone spray.
Are replacement parts available?
Yes, replacement knobs, screws, and rubber pads can be ordered from Scanstrut. Contact their support for part numbers.
What is the warranty period?
Scanstrut offers a 2-year limited warranty against defects in materials and workmanship. Proof of purchase required.

User questions about SC-AOB-A2 Scanstrut

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Accessory in PDF format for free! Find your manual SC-AOB-A2 - Scanstrut and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SC-AOB-A2 by Scanstrut.

USER MANUAL SC-AOB-A2 Scanstrut

Register your ATMOS ownership.

please visit:

scanstrut.com/air/atmos/register

or scan
QR code image with rounded corners, no visible text or symbols beyond the matrix pattern

For translations of this manual.

please visit:

scanstrut.com/air/atmos/manuals-v2

or scan
QR code image containing encoded data, no visible human-readable text

Table of Contents

Safety Information 4

Product Contents 6

Technical Information 8

Cutting Template 9

Mounting Guide 10

Location Requirements 11

Tools Required 12

Installion Instructions 13

Power connections 14

Screen Display 15

Button Functions 16

Operating Instructions 17

Inflate Steps 18

Deflate Steps 19

Door Operation 20

Diagnostics 21

Key Technical Data 22

Troubleshooting 24

Rectifying Faults 25

Care Instructions 26

Frequently Asked Questions 27

Warranty Information 28

Compliance information 31

Important Safety Information

CAUTION.

  • Check maximum recommended pressure of the inflatable product before inflating. Exceeding the maximum allowable pressure can damage the inflatable product.
  • The purpose of using the product is limited to those described in the instructions.
  • Do not remove the hose while inflating. High air pressure can cause serious injury.
  • Do not submerge the hose in any liquid.
  • Keep the ATMOS door closed when not in use.
  • When installing this product ensure the power source is adequately protected by means of a suitably-rated fuse. The product should be powered by a battery with short-circuit protection.
  • This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
    • Children shall not play with the appliance.
  • Cleaning and user maintenance shall not be made by children without supervision.
  • If the supply cord is damaged, it must be replaced by the manufacturer, it's service agent or similarly qualified persons in order to avoid a hazard.
  • The product must only be installed by a professional marine electronics installer.

NOTICE.

• Always read manual before installation and use.
- This product contains no user serviceable components. Unauthorized repair will void your warranty.
- If the hose is damaged, do not operate this product, please replace the hose immediately.
- Do not allow the air pump to run for more than 25 minutes.
- Motor overheating can cause internal damage, allow pump to fully cool for 30 minutes after continuous operation for more than 25 minutes.
- If any components are damaged, do not use this product. Please contact your authorised reseller for advice on purchasing a replacement.
- Do not leave ATMOS unattended while inflating or deflating.
- Do not run ATMOS with the door closed.

WARNING.
Scanstrut SC-AOB-A2 - NOTICE. - 1Warning: Product Installation and OperationThis product must be installed and operated in accordance with the instructions provided. Failure to do so could result in personal injury, damage to your vessel and/or poor product performance.
Scanstrut SC-AOB-A2 - NOTICE. - 2Warning: Switch Off Power SupplyEnsure the vessel/vehicle power supply is switched OFF before starting to install this product. Do NOT connect or disconnect ATMOS with the power switched on.
Scanstrut SC-AOB-A2 - NOTICE. - 3Warning: Use 12V DC Power supply ONLYThis product must ONLY be connected to a 12V DC power source. Failure to do so could result in personal injury, damage to your vessel and permanent damage to the unit to the product. This product contains reverse polarity power protection.
Scanstrut SC-AOB-A2 - NOTICE. - 4Warning: Do NOT Block Inflation and/or Deflation Ports.Ensure that the inflation port and deflation port are unobstructed at all times. Failure to do so could result in personal injury, damage to your vessel, and permanent damage to the product.

Product Contents

Part List
No.Description Qty
1ATMOS 1
2Snap Covers 2
3Suncover 1
4Hose 1
5Hose Bag 1
6Quick Start Guide 1
7Mounting Template 1
8Fixings (see tools required) 10
9Valve Holder 1

① ② ⑧ BRUSILEST TECHNOLOGY

Scanstrut SC-AOB-A2 - Product Contents - 2

Valve Connector Types
Boston Valve Pinch Valve 805 Valve H3/HR Valve C7 Valve Ø31mm (1 1/4") Valve

Scanstrut SC-AOB-A2 - Product Contents - 4

Scanstrut SC-AOB-A2 - Product Contents - 5

Rubber seals are preloaded onto valves and can be interchanged between different valve types to achieve an airtight seal.

Technical Information
Sun cover 17mm (0.67") 13mm (0.51") 110mm (4.33") 198mm (7.80") 88mm (3.46") 297mm (11.69") 385mm (15.16") Sun cover 203mm (8.0") Inflate INFLATE DEFLATE Deflate Suncover 308mm (12.13")

Cutting Template

Included within the box, you will find the cutting template necessary for your ATMOS installation. Alternatively, you can access the template on our website (www.scanstrut.com). To further streamline the process, we offer the option to download the DXF file by simply scanning the QR code provided below.

Please note that proper adherence to the cutting template is essential to ensure optimal performance. Take care to follow the provided instructions and guidelines when using the template during your installation process.

If you have any questions or require additional assistance, please read our FAQs on page 27. Our customer support team is also readily available to provide guidance. You can find our contact details on our website or within the product documentation.

Download the DXF cutting template Cut out 260mm (10.23°) Hole saw 216mm (8.50°) 55mm (2.17°) 78mm (4.07°) 54mm (2.13°) 55mm (2.17°)

Not to scale.

Mounting Guide

Diagram showing two views of a mechanical component with red 'X' and green checkmark indicators.

ATMOS must be installed on a flat surface. The chosen surface should be rigid and have a minimum thickness of 3mm/0.12" This thickness requirement is essential to provide sufficient support and stability.

+10° -30°

ATMOS must ONLY be installed at an angle ranging from +10° to -30° from vertical. This is essential to prevent the accumulation of water in the door chamber or inside the pump housing.

Location Requirements

To allow door to open fully, carefully chose an installation location with sufficient clearance. This will ensure that the product can be used with ease and convenience.

< 90° Door Opening Makes hose use very difficult.

Scanstrut SC-AOB-A2 - Location Requirements - 2

Scanstrut SC-AOB-A2 - Location Requirements - 3

Scanstrut SC-AOB-A2 - Location Requirements - 4

180° Door Opening.

>15mm (0.59") 190° Max Door Opening. Allow for sufficient space during installation.

Tools Required

Tools
Scanstrut SC-AOB-A2 - Tools Required - 1Pencil Pozi Screw driverScanstrut SC-AOB-A2 - Tools Required - 2(Size: PZ1)Scanstrut SC-AOB-A2 - Tools Required - 3Drill Bit (see table)
Scanstrut SC-AOB-A2 - Tools Required - 4Scanstrut SC-AOB-A2 - Tools Required - 5Scanstrut SC-AOB-A2 - Tools Required - 6
ø44mm (1-3/4")Hole SawJigsaw Power Drill
Drill Size Table
Material Drill Fixing
Soft Material e.g. plywood2mm (5/64")No.4 Screw (Included)
Hard Material e.g Fiberglass, acrylic, hardwood.2.5mm (3/32")
Metal e.g. Steel, aluminium3mm (1/8")Recommended >20mm x M3 Countersunk Bolt with Washer and Nyloc (Not included)

Installation Instructions

1
Technical line drawing of a rectangular frame with four circular holes and mounting brackets (no text or symbols)

Mark cutting profile.

2
Pure technical line drawing of a rectangular frame with four circular holes and centerlines (no text or symbols)

Drill pilot holes (see table).

3
Pure mechanical diagram of a cylindrical component with mounting holes, no text or symbols present

Hole Saw corners.

4
Pure geometric diagram with circles and lines, no text or symbols present

Saw between corners.

5
5

Screw ATMOS in place.

6
Technical illustration of a device with a slide and a ruler, showing no text or symbols present.

Fix covers in place.

Power Connections
Min Bend Radius
Simple electrical circuit diagram with battery, switch, and capacitor (no text or symbols)

R

Cable Information

Cable AWG16
Cable Jacket ∅8.75 ± 0.25mm
Cable Cross Sectional Area2x 1.5mm 2
Input Voltage11.5-14.5V
Max Current Draw12A (140W)
Cable Length500mm (20")
Min Bend Radius (R)54mm (2.12")
Positive Cable (+)RED
Negative Cable (-)BLACK
Recommended ConnectorDEUTSCH DTP04-2P

NOTICE.

  • Mount product in close proximity to the battery.
  • Check battery health before installation.
  • A switch or disconnection is to be incorporated into the fixed wiring when installing the product.

Screen Display

20.0 12.5v PSI

Display
No.ItemDescription
1Pressure / warning displayATMOS features an LCD display with a wide viewing angle, ensuring a clear view of read-out.
2Voltage displayATMOS features a Live Voltage readout, enabling you to conveniently monitor your battery level.
3Pressure unitsPress the pressure unit button below the LCD display to select your desired pressure unit - either ‘PSI’ or ‘BAR’.

Button Functions

Button Function
Scanstrut SC-AOB-A2 - Button Functions - 1Power On / Off
Scanstrut SC-AOB-A2 - Button Functions - 2Increase Target Pressure
Scanstrut SC-AOB-A2 - Button Functions - 3Decrease Target Pressure
Scanstrut SC-AOB-A2 - Button Functions - 4Confirm / Start / Stop
Scanstrut SC-AOB-A2 - Button Functions - 5PSI / BAR Selector

Operating Instructions

Attach

Connector
Technical line drawing of a mechanical connector with threaded shaft and mounting bracket (no text or symbols)

Inflate
Technical diagram of a mechanical assembly with a coiled hose and housing (no text or symbols)

Deflate
Technical diagram of a device with labeled component 'Deflate' and connector housing (no readable text beyond label)

Inflate

  1. Press and HOLD power button to turn on.

  2. Press start/stop button to set pressure.

  3. Attach the correct valve connector and seal for your inflatable to the end of your hose, turn clockwise to tighten it.

  4. Connect the hose to your inflatable and fix it by turning clockwise.

  5. Open ATMOS door and connect the other end of your hose to ATMOS' inflate port, turn it clock wise to tighten.

  6. Check recommended inflatable pressure.

  7. Use the square button below the screen to select either "PSI" or "BAR".

  8. Use the arrows to set target pressure, depending on your inflatable's requirements.

  9. Press the start/stop button to confirm your target pressure.

  10. Press start/stop to begin inflating.

  11. Once your inflatable reaches the set pressure value it will automatically stop.

  12. Remove and store hose, press and hold power button to turn off.

Deflate

  1. Connect hose to the DEFLATE port.

  2. Connect hose to inflatable

  3. Press the Play/Pause button of ATMOS to start venting until all the air is discharged, then the power can be turned off.

  4. When inflatable is fully deflated press Play/Pause button.

  5. Remove and store hose, press and hold power button to turn off.

NOTICE.

- If not getting to target pressure, check connector seal connection with inflatable.

- To pause ATMOS inflatating or deflating, press confirm / start / stop button.

- Please find more information on our troubleshooting page 24.

How to Inflate

1 Attach correct hose adaptor for inflatable.

Pure diagram of a mechanical component with two directional arrows, no text or symbols present

2 Connect hose to INFLATE port.

IMPLATE DEPLETS

3 Press and hold to turn on.

SCANSTRUT SCANSTRUT ATMOS

4 Check recommended inflatable pressure.

SCANSTRUT SET PRESSURE ▶II

5 Select PSI or BAR and confirm.

SCANSTRUT 1.0 12.5v PSI ① ②

6 Set target pressure.

SCANSTRUT 1.0 12.5v PSI

7 Confirm INFLATE pressure.

SONSTRUT 14.0 12.5v PSI

8 Start INFLATING! ATMOS stops when target pressure reached.

SONSTRUT 14.0 12.5v PSI

How to Deflate

1 Attach correct hose adaptor for inflatable.

Pure diagram of a device with no text, numbers, or symbols

2 Connect hose to DEFLATE port.

INFLATE INFLATE

3 Press and hold to turn on.

SCANSTRUT SCANSTRUT ATMOS

4 Press to confirm DEFLATE.

5 Select PSI or BAR and confirm.

6 Confirm low pressure at 1.0 PSI/0.7 BAR.

SONSTRUT SET PRESSURE ▶II

SONSTRUT 1.0 12.5v PSI ① ②

SONSTRUT 1.0 12.5v PSI

7 Start DEFLATING!

Need more information? Scan QR code.

SCANSTRUT 1.0 12.5v PSI

QR code image with rounded corners, no visible text or symbols beyond the matrix pattern

Waterp ATMOS that spr latched ATMOS door is t door clc safety o

Waterproof Door

ATMOS features an IPX6 waterproof door that springs open and must be manually latched closed. It is important to note that ATMOS is only IPX6 waterproof when the door is fully closed. It is advised to keep the door closed when not in use to ensure the safety of your product.

NOTICE.

When not in use, remove the hose from ATMOS and inflatable, then store it in the net storage bag provided in a cool, dry place.

Pressure Conversion

PSIBARKPA
10.0686.89
50.3434
100.770
151.03103
201.4140

Diagnostics

Name of FaultSymbolDescription of FaultAction
Input VoltageScanstrut SC-AOB-A2 - Diagnostics - 1Input voltage is too high or low.Ensure voltage is between 11.5-14.5V.
Over TemperatureScanstrut SC-AOB-A2 - Diagnostics - 2Thermal shut off reached, internal temperature is too high.Wait for product to return to operating temperature.

Key Technical Data

Performance
Time to inflate 10ft 6” SUP to 20 PSI 6to 8 mins
Time to inflate towable to 1.5 PSI >3mins ≈
Time to deflate 10ft 6” SUP >1 min ≈
Time to deflate towable >1 min ≈
Time to inflate a swim platform to 5 PSI>16 mins ≈
Time to inflate a 12ft dinghy to 3 PSI >13 min ≈
ScreenLCD, high brightness and colour, daylight viewable, wide viewing angle
Screen InformationPSI or BAR; pre-set pressure; voltage readout
Stand-by mode No activity auto power-off at 5 mins
Auto shut-off At target pressure
Technical
Max pressure 20 PSI / 1.37 BAR
Max volume of airflow 0-1 PSI 350 LPM/12.3 CFM
Max volume of airflow 1-20 PSI 70 LPM/2.5 CFM
Included valve connectorsBoston Valve, C7 Valve, H3/HR Valve, Pinch Valve, 805 Valve
Length of hose included 2.5m (8ft). Includes net storage bag
Input voltage 12V Battery system (11.5 – 14.5V)
Max current draw 12A (140W)
Standby power draw 0.1W Max
Two stage pumpStage 1 = 0 - 1 PSIStage 2 = 1 - 20 PSI
Ambient operating temp-20° to +50 °C
Max run time per session25 mins
Max noise level (unmounted)Installation85 dB
How?Panel mounted using self-tapping screws. Or bolts (not included).
Where?Fit into a wide variety of locations on board: seating, side panels or consoles. Min cavity depth 110mm (4.33")
Installation angle? + 10° to - 30° from vertical
Service? No end-userserviceable parts
Ignition protected?Yes, ATMOS SC-AOB-A2 meets the ISO 8846 and SAE J1171 test standard for Ignition Protection.
Environment
ProtectionReverse polarity, short-circuit, under voltage, overload, over temp.
Environmental protectionConformal coated electronics and PCB
Certifications CE, ROHS, UN ECE R10, UKCA
Cable length 500mm (20") 2x 1.5mm 2 16 AWG
Waterproof rating IPX6 front and rear (door closed)
Air flow In and out of front of unit only. Rear of unit sealed

Troubleshooting

Fault Display Potential Cause Remedy
ATMOS does not switch onNone Not installed correctlyCheck fuse and wire connection.
Scanstrut SC-AOB-A2 - Troubleshooting - 1Not enough voltage being delivered to ATMOSCheck health of battery.
ATMOS stops working during inflation / deflationtxxciOver heatingWait for product to cool down for 20-30 mins.
ATMOS on, but not workingNone Electrical faultContact authorized reseller or dealer.
Inflatable not reaching required pressureN/A Air leakCheck hose is tightened correctly on to inflate port.
Check connector seal with inflatable, then try changing rubber seal included with other connectors.
Check inflatable for punctures.
Check ATMOS hose for punctures.
Check valve seals are present in each end of the hose.
ATMOS does not go above 1PSICurrent inflatable pressureInput Voltage too low.Confirm Power supply is stable, ensure ATMOS is receiving a minimum of 12.0V.
ATMOS Swithces off while inflating/deflating large inflatableOriginal set pressureWhile pump is running, ATMOS is programmed to switch off after 5 mins of no pressure change. This is a safety feature incase left unattended.Whilst infalting/deflating large inflatables, it may be neccassary to re-start ATMOS after 5 mins.

Rectifying Faults

In the rare event that you encounter a fault with your ATMOS that cannot be resolved through troubleshooting or the instructions provided in this manual, we recommend getting in touch with the authorized reseller or dealer where you purchased ATMOS.

Please provide them with the following information:

  1. Product model and batch number, which can be found on the label located on the back of the product.
  2. Detailed description of the fault: explain the issue you are experiencing, including any error messages or abnormal behavior observed.
  3. Steps taken: describe the steps you have already attempted to troubleshoot the issue, following the instructions provided in the manual.

The authorized reseller or dealer will guide you through the next steps. Please note that any repairs or replacements may be subject to the terms and conditions outlined in your product warranty.

If you have any general enquiries or need assistance, you can also contact our customer support team. You can find their contact details at www.scanstrut.com.

Alternatively, scan the QR code below and fill out our contact form. Our customer service support team will be in touch within 1 working day.

Help Center

QR code image containing encoded data, no visible human-readable text

Care Instructions

Suncovers

To protect your product from the harmful effects of ultraviolet (UV) light, always use the supplied suncover when the product is not in use. However, it is important to remove the suncover when traveling at high speeds to prevent potential loss.

Routine Checks

  • Examine cables and hoses for signs of damage.
  • Check cable is securely connected.
  • Check hose valve seals are in place.

Cleaning

  • Use a damp cloth to wipe clean.
  • Do NOT use abrasive, acid, solvent or other chemical based products.
  • Do NOT jet wash.

Cleaning Display Screen

The display does not require regular cleaning. If cleaning the display becomes necessary, please follow these steps:

  • Switch off the power to the display.
  • Wipe the screen with a clean, lint-free cloth.
  • If there are any grease marks, you can use a mild detergent to remove them.

FAQs

Q. How long is the hose that is supplied?

A. ATMOS is supplied with a 2.5m/8ft hose.

Q. Is ATMOS waterproof?

A. Yes, ATMOS is IPX6 waterproof with the door closed. It has been designed to use onboard a boat or RV.

Q. What power supply does ATMOS require?

A. ATMOS needs a 12V input voltage to work.

Q.What can ATMOS inflate?

A. ATMOS has been designed to inflate and deflate paddleboards, towables, tenders, dinghies, swim platforms, fenders and more.

Q. What connectors are included in the box?

A. Boston Valve, C7 Valve, H3/HR Valve, Pinch Valve, 805 Valve, ∅31mm (1 1/4") Valve

Q. What maximum inflate pressure can ATMOS deliver?

A. 20PSI / 1.37 BAR

Q. Can you install ATMOS anywhere on the boat / RV?

A. Yes. ATMOS is an ignition protected device.

Q. Do I need to service ATMOS?

A. No. ATMOS does not have any end-user serviceable parts and is covered by a 2-year limited warranty.

Q. Can I install ATMOS at any angle?

A. No. ATMOS must to be installed at a max of +10 to -30° from vertical (See page 10).

Q. What length is the power cable?

A. ATMOS is fitted with a 500mm (20") 2x 1.5mm² 16 AWG cable.

Warranty Information

SCANSTRUT INC. LIMITED WARRANTY

Scanstrut Inc., a Private limited Company with principal address at Scanstrut Inc., a Delaware Corporation with principal address at 7 Pequot Park Road, Unit 303, Westbrook, CT 06498, USA (the "SELLER"), warrants that the equipment and equipment parts manufactured by Seller (the "Product") and sold or provided to the first end user ("BUYER") are produced according to usual practices, customs, standards, specifications and tolerances of trade prevailing in the country of origin at the time of production and shall, subject to the limitations and exclusions set forth below, be free from defects in design, material, and workmanship.

INSTALLATION, PAYMENT AND MAINTENANCE REQUIREMENTS This Limited Warranty applies only if:

of damage or loose parts.
3. The person filing the warranty claim is the first end user of the Product;
4. BUYER complies with all other sections of this Limited Warranty.
4. BUYER complies with all other sections of this Limited Warranty.

INSTALLATION, PAYMENT AND MAINTENANCE REQUIREMENTS This Limited Warranty applies only if:

PROCEDURE FOR OBTAINING WARRANTY SERVICE

The procedure described in Section 2 shall hereinafter be referred to as the "Warranty Claim Procedures." For the Limited Warranty to apply, BUYER must completely fill out and deliver to the SELLER a warranty claim fully describing the alleged defects or failures of the Product and original proof of purchase within the Warranty Period (defined in Section 4) and within Three (3) business days of the date BUYER discovered the alleged defect. Notwithstanding the foregoing, in the event that SELLER determines in its sole

discretion, that BUYER reasonably should have discovered the alleged defect before its actual discovery, this Limited Warranty shall not apply.

In order to determine whether the Limited Warranty should apply, BUYER shall provide any information to SELLER, including photographs where applicable, via telephone, email or any other appropriate means of communication. In the event the defect is covered by the Limited Warranty, SELLER may, at its sole option, require that the defective Product be shipped to the address provided by SELLER with mailing or shipping charges prepaid. BUYER shall pay all expenses associated with returning the Product to SELLER, Including, without limitation, the costs of shipment, import taxes, duties and tariffs if applicable. If SELLER determines that the returned Product is covered by the Limited Warranty, SELLER agrees to pay all expenses of returning repaired or replaced Product to BUYER.

WARRANTY SERVICES PROVIDED

If the Product is proved to SELLER's satisfaction to be defective, within the Warranty Period (defined in Section 4), SELLER's obligations under this Limited Warranty shall be limited to either repairing or replacing the Product, at SELLER's sole discretion, and only if such defect was caused solely by defective design, workmanship and/or materials. Such repair or replacement shall be SELLER's sole obligation and BUYER's exclusive remedy hereunder, and shall be conditioned upon BUYER's fulfilling its obligations under SELLER's Warranty Claim Procedures.

WARRANTY PERIOD

This Limited Warranty of Product applies to each product category as defined and available on Scanstrut website (https://www.scanstrut.com/) (the "Product Category") for the periods defined in the table below Product Category: Air On-Board Warranty Period: Twenty-Four (24) months

The warranty period applies from the date the Product is sold, rented, leased, or donated to the first end user (the "Warranty Period"). The Warranty Period shall not be tolled for any reason. No action by SELLER or BUYER shall operate to extend or revive this Limited Warranty without the prior written consent of SELLER. EXCLUSIONS FROM WARRANTY

received by the BUYER; 2. Normal wear and tear from everyday use; 3. Misuse or abuse by the BUYER, including any use,

assemblage, use in combination with any external product or device other than the Product, and other than specifically instructed and recommended by SELLER;

instructed and recommended by SELLER; 4. Physical damage to the Product as a result of tampering,

  1. Items, equipment, goods, products, components, and

parts not sold by SELLER, including, but not limited to, any personal belonging, radar, satcom antenna, VHF aerial, GPS, inflatable, cellphone or other telecommunication device connected by, or on behalf of, the BUYER to the SELLER's

  1. Damage to Products caused by the carrier during shipping or by the installer during installation;
  2. Deterioration resulting from age, storage, weathering, or

  3. Continued Product use after an alleged defect is discovered or should reasonably have been discovered;

  4. Improper Installation of any kind by BUYER or any person;

  5. Damage to Product caused by fire, storm or other acts of God.

SELLER expressly reserves the right to inspect the Product and its components, parts, and BUYER's installation, use, maintenance, and any other activity or inactivity of the BUYER, when determining whether an alleged Product defect is covered by the Limited Warranty.

This Limited Warranty is provided by SELLER, and it contains the only express warranty provided to BUYER by SELLER. SELLER does not authorize any other person, including distributors, to give any other warranties on SELLER's behalf.

SELLER DISCLAIMS ANY EXPRESS WARRANTY NOT PROVIDED HEREIN AND ANY IMPLIED WARRANTY, GUARANTY OR REPRESENTATION AS TO PERFORMANCE, QUALITY AND ABSENCE OF HIDDEN DEFECTS, AND ANY REMEDY FOR BREACH OF WARRANTY OR CONTRACT, WHICH BUT FOR THIS PROVISION, MIGHT ARISE BY IMPLICATION, OPERATION OF LAW, CUSTOM OF TRADE OR COURSE OF DEALING,

INSTALLATION, PAYMENT AND MANTINANCE REQUIREMENTS
1. The Product is used properly and is operated in accordance with the SETLER's instruction as prescribed to BUYER at the time of purchase;of damage or loose parts;supplied parts and has regularly inspected for evidence3. The person filing the warranty claim is the first and user of the product;4. BUYER complies with all other sections of this Limited warranty.
The procedure described in Section 2 shall hereafter be referred to as the warranty claim procedures "For the limited warranty to warranty claim fully describing the allaged defects or failures of the data BUYER discovered that BUYER reasonably should have discovered the alleged defect before its actual discovery, this limited warranty shall not apply."In order to determine whether the limited warranty should be approved to the address required by SETLER with Material Information to SETLER, including buyer small, provide information to SETLER, including buyer small, provide information to SETLER, including buyer small, providing product by SETLER with Material Information to SETLER, including buyer small, providing product by SETLER with Material Information to SETLER, including buyer small, providing product by SETLER with Material Information to SETLER, including buyer small, providing product by SETLER with Material Information to SETLER, including buyer small, providing product by SETLER with Material Information to SETLER, including buyer small, providing product by SETLER with Material Information to SETLER, including buyer small, providing product by SETLER with Material Information to SETLER
INITSTALATION, PAYMENT AND MANTINANCE REQUIREMENTS
1. The Product is used properly and is operated in accordance with the SETLER's instruction as prescribed to BUYER at the time of purchase;time of purchase;
SCANSITRUT LTD. LIMITED WARRANTY
INTS LASTED WARRANTY APPLES ONLY IT:
SELECTS. LIMITATION OF LABILITIES
SELLERS. LIMITATION OF LABILITIES
ITEMS. LIMITATION OF LABILITIES
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES RERIDRED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICIAL ITEMS NOT TO BUYER shall be limited to the warranty claim (design, material, and workmanship).
WITH ANY UNDERSTAKING OUT OF BRACK OF CONTRACT, WITH REPECT TO LABILATES, OR OTHER THEORIES OF LAW, WITH REPECT TO RESUBJECT TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANOTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER O BLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATES, WITHOUT ORDER TO ANY OTHER OBLIGATIONS OR ULTIMATESTHIS LIMITED WARRANTY APPLES ONLY IT:
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY NETTERO.
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLERWITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERO.
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICIAL ITEMS NOT TO BUYER shall be limited to the warranty claim (design, material, and workmanship).
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERO.
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER. OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERO.
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER. OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERO.
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY NETTERO.
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERO.
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERO.
WITH ANY UNDERTAKING, BCTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERO.
WITH ANY UNDERTAKING, BCTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER. OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERO.
WITH ANY UNDERTAKING, BCTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERO.
WITH ANY UNDERTAKING, BCTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERNO.
WITH ANY UNDERTAKING, BCTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERNO.
WITH ANY UNDERTAKING, BCTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER. OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERNO.
WITH ANY UNDERTAKING, BCTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERNO.
WITH ANY UNDERTAKNING, BCTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERNO.
WITH ANY UNDERTAKING, BCTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERNO.
WITH ANY UNDERTAKING, BCTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERNO.
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERNO.
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER. OR Products SOLD OR SERVICES REDEDED BY NETTERNO.
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERNO.
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER. OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERNO.
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BYNETTERNO.
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERNO.
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SetLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERNO.
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERNO.
WITH ANY UNDER TAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDED BY NETTERNO.
WITH ANY UNDERTAKING, ACTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICES REDEDED BY SETLER, OR Products SOLD OR SERVICES REDEDDY AT THE END OF THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR This ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS Order FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDERFOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FOR THIS ORDER FORTHIS ORDER.
WITH ANY UNDERTAKING, BCTS OR OMISSIONS REATED BY SETLER, OR PRODUCTS SOLD OR SERVICE SREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIES AND REDUCEDBY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIPLIES AND REDUCED BY NETTERNO.
WITH ANY UNDERTAKING, BCTS OR OMISSIONS REATED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPILIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIES AND REDUCED BY SETLER, ORProducts SOLD OR SERVICE SIREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIES AND REDUCEDBY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIPLIES AND REDUCED BY NETTERNO.
WITH ANY UNDERTAKING, BCTS OR OMISSIONS REATED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIPLIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIRDS PER COPIELIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIES AND REDUCED BY SETLER, ORProducts SOLD OR SERVICE SIREDS PER COPIELIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIES AND REDUCEDBY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIES AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIEA AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIEA AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIEA AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIEA AND REDUCED BY SETLER, OR Products SOLD OR SERVICE SIREDS PER COPIELIEA AND REDUCED BY SETLER, OR Products SOLDOR O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATEO NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE ONATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NAT O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O NATE O

WARRANTY PERIOD

This Limited Warranty of Product applies to each product category as defined and available on Scanstrut website (https://www.scanstrut.com/) (the "Product Category") for the periods defined in the table below

Product Category: Air On-Board Warranty Period: Twenty-Four (24) months

The warranty period applies from the date the Product is sold, rented, leased, or donated to the first end user (the "Warranty Period"). The Warranty Period shall not be tolled for any reason. No

Limited Warranty without the prior written consent of SELLER. EXCLUSIONS FROM WARRANTY

The following is not included under this Limited Warranty:

Scratches, dents, marks or other visible surface wear on the Product, unless SELLER is notified as soon as the Product is received by the BUYER;

  1. Normal wear and tear from everyday use;
  2. Misuse or abuse by the BUYER, including any use,

assemblage, use in combination with any external product or device other than the Product, and other than specifically

instructed and recommended by SELLER; 3. Physical damage to the Product as a result of tampering,

approval of SELLER, unreasonable use and/or negligence of the BUYER whether foreseeable by SELLER or not;

  1. Items, equipment, goods, products, components, and parts not sold by SELLER, including, but not limited to, any personal belonging radar, satcom antenna, VHE aerial GPS

inflatable, cellphone or other telecommunication device connected by, or on behalf of, the BUYER to the SELLER's

  1. Damage to Products caused by the carrier during shipping or by the installer during installation;

erioration resulting from age, storage, weathering, or lack of use;

  1. Continued Product use after an alleged defect is discovered or should reasonably have been discovered;

  2. Improper installation of any kind by BUYER or any person, and,

  3. Damage to Product caused by fire, storm or other acts of

God.

SELLER expressly reserves the right to inspect the Product and its components, parts, and BUYER's installation, use, maintenance, and any other activity or inactivity of the BUYER, when determining whether an alleged Product defect is covered by the Limited Warranty.

LIMITATIONS ON WARRANTY; DISCLAIMER OF WARRANTIES

This Limited Warranty is provided by SELLER, and it contains the only express warranty provided to BUYER by SELLER. SELLER

does not authorize any other person, including distributors, to give any other warranties on SELLER's behalf.

SELLER DISCLAIMS ANY EXPRESS WARRANTY NOT PRO

HEREIN AND ANY IMPLIED WARRANTY, GUARANTY OR REPRESENTATION AS TO PERFORMANCE, QUALITY AND

ABSENCE OF HIDDEN DEPCTS, AND ANY REMEDT FOR BREACH OF WARRANTY OR CONTRACT, WHICH BUT FOR

THIS PROVISION, MIGHT ARISE BY IMPLICATION, OPERATION OF LAW, CUSTOM OF TRADE OR COURSE OF DEALING.

INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Implied warranties in jurisdictions where they may not be disclaimed shall be in effect only for the duration of the express warranty set forth herein.

If BUYER has a claim under this Limited Warranty or under any implied warranties provided to BUYER by state or applicable law,

than one (1) year after BUYER's right to file a court action accrues. In those states or countries which do not allow this limitation on the time period for filing a court action, this provision is inapplicable.

SELLER'S LIMITATION OF LIABILITY

SELLER's liability with respect to the Product sold to BUYER shall be limited to the warranty provided herein. SELLER SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR LIABILITIES,

WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT

LIABILITY) OR OTHER THEORIES OF LAW, WITH RESPECT TO PRODUCTS SOLD OR SERVICES RENDERED BY SELLER, OR ANY UNDERTAKING. ACTS OR OMISSIONS RELATING THERET

Without limiting the foregoing, SELLER SPECIFICALLY DISCLAIMS ANY LIABILITY FOR PROPERTY OR PERSONAL INJURY.

ANY LIABILITY FOR PROPERTY OR PERSONAL INJURY DAMAGES, PENALTIES, SPECIAL OR PUNITIVE DAMAGES,

DAMAGES FOR LOST PROFITS OR REVENUES, SERVICES, DOWN TIME, SHUT DOWN OR SLOW DOWN COSTS, OR

FOR ANY OTHER TYPES OF ECONOMIC LOSS, AND FOR CLAIMS OF BUYER'S CUSTOMERS OR ANY THIRD PARTY

FOR AND DISCLAIMS ALL CONSEQUENTIAL, INCIDENTAL

LIABILITY ARISING IN CONNECTION WITH THE PRODUCT SHALL BE LIMITED TO THE VALUE OF THE PRODUCT SOLD TO BUYER.

The SELLER's total liability in contract, tort (including negligence or breach of statutory duty), misrepresentation, restitution,

of otherwise, arising in connection with the performance of contemplated performance of the contract between SELLER and BUYER shall be limited to the price paid for the Products

MISCELLANEOUS

Any description of the Product, whether in writing or made orally by SELLER or SELLER's agents, specifications, samples, models, bulletins, drawings, diagrams or similar materials used in connection with BUYER's order, are for the sole purpose of identifying the Product and shall not be construed as an express warranty. Any suggestions by SELLER or SELLER's agents regarding use, application, or suitability of the Product shall not be construed as an express warranty unless confirmed in writing by SELLER to be such.

WARRANTY PERIOD

Compliance, Regulations and Standards

We can confirm that this product complies with relevant safety standards, regulations, and certifications.

Compliance statements

Scanstrut SC-AOB-A2 - Compliance statements - 1

Scanstrut Ltd, declares the product 'ATMOS 12V Brushless Integrated Air Station' SKU SC-AOB-A2 is in compliance with Low Voltage Directive (2014/35/EU) & EMC Directive (2014/30/EU). The CE certificate of compliance can be found at: www.scanstrut.com/uk/compliance.

Product Disposal

Scanstrut SC-AOB-A2 - Product Disposal - 1

This marking indicates that this product should not be disposed with other household waste throughout the EU. To prevent possible harm to the environment or human health through uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please contact the retailer where the product was purchased. They can dispose of this product using environmentally safe methods.

Test Standards

Scanstrut SC-AOB-A2 - Test Standards - 1

Our testing standard at Scanstrut is encapsulated by the acronym SCA, which stands for Safe, Certified, and Approved. With over 35 years of experience and expertise in designing products for outdoor use, we design our products to be able to thrive in the harshest of outdoor environments. To find out more visit https://www.scanstrut.com/about-us/testing-ethos

Markings required by law.

CE UK RoHS UN ECE R10

Technical Accuracy

To the best of our knowledge, the information in this document was correct at the time it was produced. However, Scanstrut cannot accept liability for any inaccuracies or omissions it may contain. In addition, our policy of continuous product improvement may change specifications without notice. As a result, Scanstrut cannot accept liability for any differences between the product and this document. Please check the Scanstrut website (www.scanstrut.com) to ensure you have the most up-to-date version(s) of the documentation for your product.

Don't forget to tag us

@scanstrut

to showcase how you're using ATMOS.

Copyright ©2023 Scanstrut Ltd. All rights reserved.

No part of this material may be copied, translated or transmitted (in any medium) without the prior written permission of Scanstrut Ltd and Scanstrut Inc.

Scanstrut SC-AOB-A2 - @scanstrut - 1

Eco packaging:

Printed using vegetable based ink.

100% recyclable.

Reduce | Reuse | Recycle

Installation Date

Empty rounded rectangle outline with no text, numbers, or symbols inside

SCANSTRUT

ATMOS

QUICK START GUIDE I HOW TO INFLATE

MINISSION ATMOS

1 Attach correct hose adaptor for inflatable.

Scanstrut SC-AOB-A2 - ATMOS - 2

2 Connect hose to INFLATE port.

Diagram of a device with a labeled component and connection lines (no readable text or symbols)

3 Press and hold to turn on.

SCANSTRUT SCANSTRUT ATMOS

4 Check recommended inflatable pressure.

SCAGRUT SET PRESSURE II

5 Select PSI or BAR and confirm.

SONASTRIU 1.0 12.5v PSI ① ②

6 Set target pressure.

SONENTUIT 1.0 12.5v PSI

7 Confirm INFLATE pressure.

SONSTRUT 14.0 12.5V PSI

8 Start INFLATING! ATMOS stops when target pressure reached.

SOMSTRUT 14.0 12.5v PSI

© Scandrut / ATMOS

SCANSTRUT

ATMOS

QUICK START GUIDE I HOW TO DEFLATE

ASSEMBLATE ATMOS

1 Attach correct hose adaptor for inflatable.

Scanstrut SC-AOB-A2 - ATMOS - 2

2 Connect hose to DEFLATE port.

Diagram of a device with a cable and a labeled port (no text or symbols present)

3 Press and hold to turn on.

SCANSTRUT SCANSTRUT ATMOS

4 Press to confirm DEFLATE.

SCANSTRUT SET PRESSURE II

5 Select PSI or BAR and confirm.

SCANSFUT 1.0 12.5V PSIC ① ②

6 Confirm low pressure at 1.0 PSI/ 0.7 BAR.

SONSTRUT 1.0 12.5v PSI

7 Start DEFLATING!

SCANSIUT 1.0 12.5V PSI

Need more information? Scan QR code.

Scanstrut SC-AOB-A2 - ATMOS - 9

Drill pilot hole (See table) Hole saw Ø44mm (1-3/4") Drill bit (for pilot hole) Material No. 4 Screw Soft Material 2mm E.g plywood (5/64') Hard Material 2.5mm E.g Fiberglass (3/32') acrylic, hardwood Mounting holes 183mm (7.2") Cut out 168mm (6.61") Hole saw 124mm (4.88") Cut out 260mm (10.23") Hole…

Parts Included
1x ATMOS 2x Screw Covers 10x No.4 25mm Countersunk Screws

Need help?
Scanstrut SC-AOB-A2 - ATMOS - 12

Read manual for more information.
Scanstrut SC-AOB-A2 - ATMOS - 13

Tools Required

PencilPozi ScrewdriverDrill Bit (see table)o44mm (1-3/4") Hole SawJig Saw

Scanstrut SC-AOB-A2 - ATMOS - 14

Scanstrut SC-AOB-A2 - ATMOS - 15

Scanstrut SC-AOB-A2 - ATMOS - 16

Scanstrut SC-AOB-A2 - ATMOS - 17
① Mark cutting profile.
② Drill pilot holes (see table).
③ Hole saw corners.
④ Saw between corners.

Scanstrut SC-AOB-A2 - ATMOS - 18

Scanstrut SC-AOB-A2 - ATMOS - 19

Scanstrut SC-AOB-A2 - ATMOS - 20
⑤ Screw ATMOS in place.
⑥ Fix covers in place.
⑦ Connect to 12V power supply.

ATMOS - Brushless 12V Integrated Airstation

Email: sales@scanstrut.com Email: usasales@scanstrut.com

Sun cover 203mm (8.0") Sun cover 17mm (0.67") 13mm (0.51") 110mm (4.33") Sun cover 308mm (12.13") 198mm (7.80") BRUSHLESS TECHNOLOGY Inflate INFLATE DEFLATE Deflate 88mm (3.46") 297mm (11.69)

Issue 2.1 Page | 1
SC-AOB-A2

SCANSTRUT

ATMOS - Brushless 12V Integrated Airstation

Email: sales@scanstrut.com Email: usasales@scanstrut.com

MOUNTING GUIDE
Diagram showing two mechanical components with red 'X' and green checkmark indicators, likely illustrating a correct or incorrect assembly.

ATMOS must be installed on a flat surface. The chosen surface should be rigid and have a minimum thickness of 3mm/0.12" This thickness requirement is essential to provide sufficient support and stability.

+10° -30°

ATMOS must ONLY be installed at an angle ranging from +10° to -30° from vertical. This is essential to prevent the accumulation of water in the door chamber or inside the pump housing.

Issue 2.1 Page | 2

SC-AOB-A2

LOCATION REQUIREMENTS

To allow door to open fully, carefully chose an installation location with sufficient clearance. This will ensure that the product can be used with ease and convenience.

< 90° Door Opening Makes hose use very difficult.

Scanstrut SC-AOB-A2 - ATMOS - Brushless 12V Integrated Airstation - 4

180° Door Opening. >15mm (0.59") 190° Max Door Opening. Allow for sufficient space during installation.

SCANSTRUT

AT M O S - Brushless 12V Integrated Airstation

Email: usasales@scanstrut.com

Email: sales@spanstrul.com

Key Technical Data

Performance
Time to inflate 10ft 6" SUP to 20 PSI 6 to 8 mins
Time to inflate towable to 1.5 PSI >3 mins ≈
Time to deflate 10ft 6" SUP >1 min ≈
Time to deflate towable >1 min ≈
Time to inflate a swim platform to 5 PSI>16 mins ≈
Time to inflate a 12ft dinghy to 3 PSI >13 min ≈
ScreenLCD, high brightness and colour, daylight viewable, wide viewing angle
Screen InformationPSI or BAR; pre-set pressure; voltage readout
Stand-by mode No activity auto power-off at 5 mins
Auto shut-off At target pressure
Technical
Max pressure 20 PSI / 1.37 BAR
Max volume of airflow 0-1 PSI 350 LPM/12.3 CFM
Max volume of airflow 1-20 PSI 70 LPM/2.5 CFM
Included valve connectorsBoston Valve, C7 Valve, H3/HR Valve, Pinch Valve, 805 Valve
Length of hose included 2.5m (8ft). Includes net storage bag
Input voltage12V Battery system (11.5 – 14.5V)
Max current draw12A (140W)
Standby power draw0.1W Max
Two stage pumpStage 1 = 0 - 1 PSISTage 2 = 1 - 20 PSI
Ambient operating temp-20° to +50 °C
Max run time per session25 mins
Max noise level (unmounted)85 dB

Issue 2.1 Page | 3
SC-AOB-A2

Installation
How?Panel mounted using self-tapping screws. Or bolts (not included).
Where?Fit into a wide variety of locations on board: seating, side panels or consoles. Min cavity depth 110mm (4.33")
Installation angle?+ 10° to - 30° from vertical
Service?No end-user serviceable parts
Ignition protected?Yes
Environment
ProtectionReverse polarity, short-circuit, under voltage, overload, over temp.
Environmental protectionConformal coated electronics and PCB
CertificationsCE, ROHS, UN ECE R10, UKCA
Cable length500mm (20") 2x 1.5mm 2 16 AWG
Waterproof ratingIPX6 front and rear (door closed)
Air flowIn and out of front of unit only. Rear of unit sealed

SCANSTRUT

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Scanstrut

Model : SC-AOB-A2

Category : Accessory