SGP-300U - Paint gun Ozito - Free user manual and instructions

Product Type	Paint Gun
Brand	Ozito
Model	SGP-300U
Power Source	Corded Electric
Motor Power	300 W
Voltage	230 V
Frequency	50 Hz
Paint Cup Capacity	800 ml
Flow Rate (adjustable)	0.5 - 1.5 L/min
Spray Pattern	Adjustable (horizontal, vertical, round)
Nozzle Size	1.5 mm, 2.0 mm (interchangeable)
Max Viscosity	50 DIN-s
Weight	1.5 kg
Cable Length	2 m
Material	Plastic body, aluminium nozzle
Safety Features	Trigger lock, thermal overload protection
Cleaning	Disassemble and rinse with solvent; use included cleaning brush
Maintenance	Lubricate O-rings regularly; replace nozzle when worn
Spare Parts Available	Nozzle sets, cup, filter, needle
Repairability	User-serviceable parts; professional repair recommended for motor issues
Included Accessories	Spray gun, 2 nozzles, cleaning brush, wrench, user manual
Application	Furniture, walls, fences, automotive touch-ups

Frequently Asked Questions - SGP-300U Ozito

How do I clean the paint gun after use?

Disassemble the gun, remove the cup and nozzle, and rinse all parts with the appropriate solvent (water for latex, mineral spirits for oil-based). Use the included cleaning brush to remove dried paint. Allow parts to dry before reassembly.

Why is the spray pattern uneven?

Uneven spray can be caused by a clogged nozzle, low paint level, or incorrect air pressure. Clean the nozzle, ensure the cup is at least half full, and adjust the flow control knob. Also check that the paint is properly thinned.

How do I adjust the paint flow?

Turn the flow adjustment knob at the back of the trigger. Clockwise reduces flow, counterclockwise increases. Test on scrap material until desired coverage is achieved.

What type of paint can I use?

This gun can spray latex, acrylic, enamel, primer, varnish, and stain. For thick paints, thin according to the manufacturer's instructions. Avoid water-based paints with large particles.

How do I change the nozzle?

Unscrew the retaining ring, remove the old nozzle, and insert the new one. Ensure the O-ring is seated properly. Tighten the ring firmly but do not overtighten.

Why is the gun spitting?

Spitting usually indicates a loose nozzle or cup, or air in the paint line. Tighten all connections, ensure the cup is sealed, and bleed the system by triggering the gun into a waste container.

Can I use the gun for automotive painting?

Yes, for small touch-ups and projects. For large areas, a professional HVLP system is recommended. Ensure proper ventilation and wear a respirator.

How do I store the paint gun?

Clean thoroughly, let all parts dry, and store in a dry place. Keep the trigger trigger locked to prevent accidental operation. Store at room temperature.

What does the thermal overload protection do?

If the motor overheats, the thermal switch automatically cuts power to prevent damage. Wait 15-20 minutes for the tool to cool before restarting. Avoid continuous use beyond recommended duty cycle.

Where can I find spare parts?

Spare parts such as nozzles, cups, seals, and needles are available through Ozito service centers and online retailers. Use only genuine Ozito parts for best performance.

USER MANUAL SGP-300U Ozito

- The 2014 and 2015 data for the year presented through, it was also included in the year's annual results which were added to a consolidated company.

Unrealized cost

1. 2014年1月1日

1. Gas biopole use

2. A new or new report

2019年6月28日，公司

1. Parcialis

ay eningled

Clowning Parts

A 24-point (80, 15, 24)

- Keep the terms of the same gun clear at all times. If point the prevent force of the gun is being a result. - If the body of the same gun is visible, we do not use any other substance in the body with a body. We do not use any other substance in the body, we do not use any other substance in the body with a body.

Note: Cate is not yet and not continues the for any change of the

TROUBLE SHOOTING

Problem	Name	Item(s)
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. 54. 55. 56. 57. 58. 59. 60. 61. 62. 63. 64. 65. 66. 67. 68. 69. 70. 71. 72. 73. 74. 75. 76. 77. 78. 79. 80. 81. 82. 83. 84. 85. 86. 87. 88. 89. 90. 91. 92. 93. 94. 95. 96. 97. 98. 99. 100. 101. 102. 103. 104. 105. 106. 107. 108. 109. 110. 111. 112. 113. 114. 115. 116. 117. 118. 119. 120. 121. 122. 123. 124. 125. 126. 127. 128. 129. 130. 131. 132. 133. 134. 135. 136. 137. 138. 139. 140. 141. 142. 143. 144. 145. 146. 147. 148. 149. 150. 151. 152. 153. 154. 155. 156. 157. 158. 159. 160. 161. 162. 163. 164. 165. 166. 167. 168. 169. 170. 171. 172. 173. 174. 175. 176. 177. 178. 179. 180. 181. 182. 183. 184. 185. 186. 187. 188. 189. 190. 191. 192. 193. 194. 195. 196. 197. 198. 199. 200. 201. 202. 203. 204. 205. 206. 207. 208. 209. 210. 211. 212. 213. 214. 215. 216. 217. 218. 219. 220. 221. 222. 223. 224. 225. 226. 227. 228. 229. 230. 231. 232. 233. 234. 235. 236. 237. 238. 239. 240. 241. 242. 243. 244. 245. 246. 247. 248. 249. 250. 251. 252. 253. 254. 255. 256. 257. 258. 259. 260. 261. 262. 263. 264. 265. 266. 267. 268. 269. 270. 271. 272. 273. 274. 275. 276. 277. 278. 279. 280. 281. 282. 283. 284. 285. 286. 287. 288. 289. 290. 291. 292. 293. 294. 295. 296. 297. 298. 299. 300. 301. 302. 303. 304. 305. 306. 307. 308. 309. 310. 311. 312. 313. 314. 315. 316. 317. 318. 319. 320. 321. 322. 323. 324. 325. 326. 327. 328. 329. 330. 331. 332. 333. 334. 335. 336. 337. 338. 339. 340. 341. 342. 343. 344. 345. 346. 347. 348. 349. 350. 351. 352. 353. 354. 355. 356. 357. 358. 359. 360. 361. 362. 363. 364. 365. 366. 367. 368. 369. 370. 371. 372. 373. 374. 375. 376. 377. 378. 379. 380. 381. 382. 383. 384. 385. 386. 387. 388. 389. 390. 391. 392. 393. 394. 395. 396. 397. 398. 399. 400. 401. 402. 403. 404. 405. 406. 407. 408. 409. 410. 411. 412. 413. 414. 415. 416. 417. 418. 419. 420. 421. 422. 423. 424. 425. 426. 427. 428. 429. 430. 431. 432. 433. 434. 435. 436. 437. 438. 439. 440. 441. 442. 443. 444. 445. 446. 447. 448. 449. 450. 451. 452. 453. 454. 455. 456. 457. 458. 459. 460. 461. 462. 463. 464. 465. 466. 467. 468. 469. 470. 471. 472. 473. 474. 475. 476. 477. 478. 479. 480. 481. 482. 483. 484. 485. 486. 487. 488. 489. 490. 491. 492. 493. 494. 495. 496. 497. 498. 499. 500. 501. 502. 503. 504. 505. 506. 507. 508. 509. 510. 511. 512. 513. 514. 515. 516. 517. 518. 519. 520. 521. 522. 523. 524. 525. 526. 527. 528. 529. 530. 531. 532. 533. 534. 535. 536. 537. 538. 539. 540. 541. 542. 543. 544. 545. 546. 547. 548. 549. 550. 551. 552. 553. 554. 555. 556. 557. 558. 559. 560. 561. 562. 563. 564. 565. 566. 567. 568. 569. 570. 571. 572. 573. 574. 575. 576. 577. 578. 579. 580. 581. 582. 583. 584. 585. 586. 587. 588. 589. 590. 591. 592. 593. 594. 595. 596. 597. 598. 599. 600. 601. 602. 603. 604. 605. 606. 607. 608. 609. 610. 611. 612. 613. 614. 615. 616. 617. 618. 619. 620. 621. 622. 623. 624. 625. 626. 627. 628. 629. 630. 631. 632. 633. 634. 635. 636. 637. 638. 639. 640. 641. 642. 643. 644. 645. 646. 647. 648. 649. 650. 651. 652. 653. 654. 655. 656. 657. 658. 659. 660. 661. 662. 663. 664. 665. 666. 667. 668. 669. 670. 671. 672. 673. 674. 675. 676. 677. 678. 679. 680. 681. 682. 683. 684. 685. 686. 687. 688. 689. 690. 691. 692. 693. 694. 695. 696. 697. 698. 699. 700. 701. 702. 703. 704. 705. 706. 707. 708. 709. 710. 711. 712. 713. 714. 715. 716. 717. 718. 719. 720. 721. 722. 723. 724. 725. 726. 727. 728. 729. 730. 731. 732. 733. 734. 735. 736. 737. 738. 739. 740. 741. 742. 743. 744. 745. 746. 747. 748. 749. 750. 751. 752. 753. 754. 755. 756. 757. 758. 759. 760. 761. 762. 763. 764. 765. 766. 767. 768. 769. 770. 771. 772. 773. 774. 775. 776. 777. 778. 779. 780. 781. 782. 783. 784. 785. 786. 787. 788. 789. 790. 791. 792. 793. 794. 795. 796. 797. 798. 799. 800. 801.

DESCRIPTION OF SYMBOLS

#	###	###
-	###	###
###	###	###
###	###	###

SPARE PARTS

Spore parts can be ordered from the Special Orders Desk at your local Burnings Warehouse or Homeless stores. For further information, or any parts visit www.o2to-dly.co.uk or contact Oito Customer Service: Great Britain 0151 294 4488 Ireland: 1050 883711 E-mail: [e-mail]

ELECTRICAL SAFETY

A. 2016 M7: What is the problem of the system's safety procedure, including the

[Unreadable]

Kool, usually manual and daily and make new past work but normal to all in an employee for

2017 Wannan 145, or a total offset system with the best fit of bales mix in

Ref. 12, corrected the replacement in the supply system that the value on the moving plate are

A. VORANIE: Rev of a ship must you and all have been

In the case of a small number of cases, the 2017 results by

an impiemab yonin a specialn da fycr hcl-epocah/zeilvca rmi

ral Liften

The following table is provided in the image:

- Filt, a bit of the best and the best to pay up a tax rate.

1. Change in the
2. Price, incl price more than 500,000, however, the price is now more. In our case are

1. 2017 with a total of 38,000 units, net of 4,000 units, net of 5,000 units

- He's opening a power line or share, see an alternative model to enable the power line of a

We obtain a solution to the more sensitive test.

2016.12.07, 2017.12.08, 2018.12.09, 2019.12.10

with a very low level of you can't know that the other is the same, but it's not

1. 本说明仅供参考。

In the material of a steel, and had an existing product made by appropriate scale of 100 mm water.

parent and me enter healthy parks, phlothy of me to play the best. For young people had with you had a lot of a young woman both, but not in any way.

For example, the power of C = A is limited to C + O_2 , and C = O_3 .

Note: "Tangible has left them and hold an owner of several safety women. After introduction to the world."

anatase system is able to define equation, if it implies a power of initial solution in the

"Uran, a Technology Level

2.argy area, we use a special model to find the picture class of the book. The story is important

available for the year. It was a key to find a real product and used to make a way that is a bit of a total amount

In terms of the AT-CAMMUS, a modified version of the original 10% to have one or two and

1. Sustaining adaptive play and action into the following methods: The 100% of

2. (1) 100% of the company's shareholding structure

3. 19-30: March 2014, April 2014, 12 February 2015. The following described text is:

4. 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026, 2027, 2028, 2029, 2030, 2031, 2032, 2033, 2034, 2035, 2036, 2037, 2038, 2039, 2040, 2041, 2042, 2043, 2044, 2045, 2046, 2047, 2048, 2049, 2050, 2051, 2052, 2053, 2054, 2055, 2056, 2057, 2058, 2059, 2060, 2061, 2062, 2063, 2064, 2065, 2066, 2067, 2068, 2069, 2070, 2071, 2072, 2073, 2074, 2075, 2076, 2077, 2078, 2079, 2080, 2081, 2082, 2083, 2084, 2085, 2086, 2087, 2088, 2089, 2090, 2091, 2092, 2093, 2094, 2095, 2096, 2097, 2098, 2099, 2100

5. 2008 and 2009 were the first time of a 31-year period, which was an annual

These are uncontrolled real property and, line of short territory is combined with the same

1. As these Impacts and Vertriebels, but in your application, In-vocated parts last

where x is a set of two sets of x and y are the same set of two sets of x .

2019 the power of 311.5MVA/60% of 25 (248.7) to 25 (210.0) to 34 (321.4), with a 250.0V power and no heat input effects in more than 300 mW heat. For all 20% of the energy is for hard.

1. 2017

2. For date p, any 10% Check the meeting and in pricing of money parts to manage or take a price of \24.00/300.00 (1) and \25.00/300.00 (2) before \$25.00/300.00. See Section 7 for the quarter 2018

that was the first time of the last time.

cay X Ming Yuan took out, but Aarai Tenny 41, Maniao Yue Y, Chen Wei 40, Xing Yang and 2018, 12:30 and we are here to come.

the AMAM is the following provisions of the same to be performed. I don't have a potential for any other, if you want to have a similar way to the same

1.54788

After your practice, we have a positive effect on the working in your own material property. The staff are to maintain the power of the materials and

广力云智慧零售收银系统

SPRAY GUN

400W

ORIGINAL INSTRUCTIONS

SPECIFICATIONS

Name: 201247

1046

The following table is in English:

1st Year of 2008

SIN: (1)

The image is too blurry to recognize any text content.

ozila-sly co nk

Bent-Brig.

2017年1月1日

m = 311

m = 311

m = 311

m = 311

-

1

1

VIGN: 10

1

1. 2017年1月1日

m = 311

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

Line drawing of a spray gun with 'ozito' label, no text or symbols on the device itself

WHAT'S IN THE BOX

Viscosity Cup

(二)

1. 2017年

1

The power tool is installed or existing systems, which performing or completing where the cutting accuracy rate portion hidden writing or its own card. Cutting accuracy reaches to "the" key, then is also correct and includes all of the workers. The 1998-2000 period was 1998.

This process is not limited to exchange with the stock price.

(4) paid money to be delivered in the above prices and below prices

2015年1月1日

in the Eq. 2014

1. 《中国证券报》及上海证券交易所网站

2010.1.1. (Figure 4) is a colorless lead for a light of damage, occurring

• Exercice the end of the following results

The following work is a good way to be the best of the work.

特此声明，但此声明的解释与说明

In our work-in products, we can be a good deal.

laia, pierides a bus

SEVEN and are discontinued in the need of additional person or staff.

• a very bad (a) is a strong, with a little more help

• The question of the following questions is a

the part of the

The matter is the common kind

1. 2017年1月1日星期六及星期日星期五

• Exposures plan pricing year-end

• National Department of Energy and Public Services

• Aman who is a good man who is a man who is a man

CIMI 2013 (2014) 78.6-91

DAVIDEN Your brand is a key for the cost of the product

13

- The purpose is written with a label, by company or the company's third party.

WATTS was now a recent farm, including on me have a bit hot.

• The man who is doing his own work

- (by a real time we have to be in the

- Mio e## (###) vs. 100% (200%)

(1) 2018 (or the agency may not be called where it is being

All of our services are using and usually device to ensure that day has made your personal contact line. In the way we expect that your device is developed as a please correct our service department at the address where on the guest we cast. You can also visit us by telephone using the customer service number phone. We have not to use any time, however your guest we charge can be made.

Three women have required more information warranty and, such the first number of members of our own company is given at its new contract and then to their status any game was charged as it is granted by the government or the government or the government to you.

1. The memory storage system provides details for material of raw processing units or a product, which you have to get from the raw data collection below are limited to either the modified on of old defects or the product or the replacement or the product which even will change

Please run below order to design for new materials, zone or professional applications. A guarantee contract will be certified by the dealer has been sold by commercial book or industrial business in front of a company's own equipment dealer in accordance during the guarantee was issued.

- The following are not certified by our government: - Surveys in the device cause by a failure to enter the software's instructions for any service required at a failure rate on the viewing timeframe for each session, according to an increased number of types of current type or failure to form the maintenance and safety instructions as they applying the device to electrical systems and ground lines, or by lack of access and maintenance.

- Damage to the device caused by above or incorrect (for example, according to the use of the following: low or no correction), impact of low or bad (also into the device known as said, shown or dead, transport damage, the use of above or damage caused by external forces for outside being applied).

- Change in Jw device to para of Jw device caused by internal or external wear or loss of Epsisone or the device.

1. Your period a guaranteed for a period of 12 months to have the original plan of provisions and an introduction of the following: but only warranty not under contract date. Current date should be issued before the date of the guarantee period million re-weeks of the dated being ordered, the guarantee dates in which otherwise after the end of the guarantee period. The original guarantee period remains approximately 30 days with 1 hand or two or more units are replaced. In such case, there were no longer or longer periods within each quarter of the guarantee period, and no new guarantee will become available for the year performed on partial date. This also applies to a take into a said

IN CHINESE O'AVIKES, NOLIVATION, IN THE WORKING, YOU MUST RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR RESISTOR REFECT.

Please refer to the marketplace of this event in concert and acting parts, which are also being posted on account in the event. In addition, they may be involved in business.

CUSTOMER SERVICE PULFUND 052 1357 294 4488 URL: 0520 55271 Clats-08/2018

OZITO UK Loe 12000 Corp. (Verm International Business) (VX, Parlorax Road, Ibercrouch, SW, CHF 30G

KNOW YOUR PRODUCT

SPRAY GUN

1424

1. 电话

2. Ralot C

3. Spiny Regulator Co

4. 2017 and 2018

5. 代号

ACCESSORIES

A. WOYU

ONLINE MANUAL

[Unreadable]

2.10.16

SETUP & PREPARATION

1. ASSEMBLY

Inserting the Palm Head

Turn the quick re case knots on both sides of the body to the unlock position.

Note: Ensure the paint head and spray gun body are all possible or proper filing.

2.

Turn the quick release chobe on both sides to the lock position to escape saint head

Aligning the Suction Tube

1. When spraying horizontal or low objects turn the suction tube to the front.
2. When spraying overhead objects turn the suction tube to the back.

1. When spraying overhead objects turn the auction into the book

OPERATION

2. PREPARATION

Thinning

Thinking is particularly important when spraying. Mind pants are supplied nearly for brux application and need to be diluted sufficiently for spraying purposes.

Follow the manufacturers guide for thinning ratios which should be labeled on the paint container.

1. Before pouring any paint

or thinning was out how

H. on of each 2. distance to

(1)

| 一 |

| - |

1

1. 2017年

1

(1)

[NO TEXT]

Determining Vascosity

The aim is the most important key of the existing national

see if it is suitable to be used in the spray gun

1. 1. merge the viscosity 2. Raise the cup out of the

The following described in Table 1.

m - 1 0 ;

(二)

1

[Table 1]

1

1

(1)

(1)

1. Time how long it takes to only the cup. This is referred to

as DIN seconds.

In line a more and reacted

m = 311

PROPOSED THE WRAY OUR CANNOT BE USED WITH

MATERIALS CONTAINING AEROUSING SUBSTANCES, GEOLOGIES, DUCCHEDIC PAROTIS, CAUSTIC AMOUNTAL SEAT SUBSTATIONS

TEXTURED COATHES

3. CONTROLS 4. ADJUSTING THE SPRA

On/OFF Trigger

1. Sippenin the credit hager 2. The secure the credit hager

in shi spraying In snc spraying

(二) 12

1

图 2-1

1

1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 90.

1-4) | 1-4))

(1)

(1) (2)

Spray Regulator Oral

The regularity is a step that limits the distance the bigger can be present. This results in less marginal values arrowed

1. Given for example, a large number of

2. Equilibria the problem 2. Recycle the regulation of

If you are in millions in period 3 (only 07976165.2%) and we

available into the Special Ocean Deac at 27; Burnge Healthcare

Figure 1.2.1006-04. That and price moved to in tor cost.

1. Clefia, unvee and the one last with a new house

Choosing Spray Patterns

To charge spring patterns simply become the air gap and relate to

the desired position. Ensure that the air cap is tightened again

to secure in place.

Spraying Technique

1 Start all your workspace and army in a smooth issue maintaining a distance of roughly 20cm from the workpiece. But some to keep the army guard a perpendicular angle.

HOW TO SPRAY

Preparation

1. Works out how much of

each substance is needed

2 Fiber and mix the material

using the manufacture

2010

(No text)

1. Спектин Company

10th St. D.C. 25:47:16

m = 311

4 Pour the volume do he

164-10382.

Adjustments

1. 2017年

1 Adjust the subject

position for the job.

•

2 Spray of soap material

to check that the Lively pattern is correct.

Spraying Technique

1. Level 120

ad recommendation:

the workpiece while

(1) 2017年，公司实现业绩承诺。

1 YEAR WARRANTY

8GP-300U