LA06T - Pregnant Audibax - Free user manual and instructions

Product Type	Active Speaker
Dimensions (W x H x D)	305 x 210 x 195 mm
Weight	2.8 kg
Power Output (RMS)	60 W
Frequency Response	50 Hz - 20 kHz
Impedance	8 ohms
Bluetooth Version	5.0
Inputs	3.5 mm AUX, RCA, XLR/TRS Combo
Battery Type	Rechargeable Lithium-ion
Battery Life	Up to 6 hours
Charging Time	4 hours
Enclosure Material	Wooden Cabinet
Grille Material	Metal
Controls	Volume, EQ Presets, Power
Included Accessories	Power Adapter, Audio Cable, User Manual

Frequently Asked Questions - LA06T Audibax

How do I pair the speaker via Bluetooth?

Press and hold the Bluetooth button on the speaker until the LED flashes. Enable Bluetooth on your device and select 'Audibax LA06T' from the list.

Can I use the speaker while charging?

Yes, the speaker supports pass-through charging. You can play music while the battery is charging via the included power adapter.

What is the maximum output volume?

The speaker delivers up to 60W RMS output, sufficient for small to medium-sized rooms. Use the volume knob to adjust.

How do I clean the speaker?

Wipe the exterior with a soft, dry cloth. Avoid using harsh chemicals or water. For the grille, gently vacuum with a brush attachment.

Does it come with a microphone input?

Yes, the speaker has a XLR/TRS combo input compatible with dynamic microphones. An external mixer may be needed for optimal gain.

What is the Bluetooth range?

The Bluetooth range is approximately 10 meters (33 feet) in open space. Walls and obstacles may reduce the range.

How long does the battery last?

Battery life is up to 6 hours at moderate volume levels. Higher volumes will reduce battery life.

Can I connect two speakers together?

This model does not support daisy-chaining or wireless stereo pairing. For larger setups, consider using an external mixer.

What should I do if the speaker stops working?

First, ensure the speaker is charged or plugged in. Try a different audio source. If the issue persists, contact Audibax support for troubleshooting.

Is the speaker waterproof?

No, the Audibax LA06T is not waterproof. Keep it away from liquids and extreme humidity to avoid damage.

USER MANUAL LA06T Audibax

Two circular diagrams showing concentric rings and a textured grid pattern, no text or symbols present.

LA-T series

USER GUIDE

The LA-T range is a series of passive ceiling speakers designed for the 100v line, with a woofer from 4.5 inches to 6.5 inches. The LA-T series is the perfect choice for the distribution of microphone calls and background music both for restaurants or commercial stores. The mounting frame is made of high quality ABS. The grille is made of metal. The LA-T is available in white.

SAFETY PRECAUTION

• Keep this manual for future reference.
• When cutting the mounting hole for the speaker, make sure there is sufficient clearance behind the panel (no obstructions like A/C channels, power lines, etc).
  • Take care of your speaker wires, they should be free of damage. Damaged speaker wires might result in poor sound quality and can damage amplifiers.
• Only use accessories specified by the manufacturer.
  • Make sure the mounting panel can support the speakers weight.
• Use sufficient amount of speakers to avoid dead spots.
• No mains power shall be connected to the loudspeakers, doing so will damage the speaker.
  • This apparatus should only be serviced by qualified personnel. If not warranty might be void.
• Use cable of the right gauge, certainly for long runs.
• Use cables with clear color indication and maintain polarity throughout the whole system.
• Avoid loud feedback from microphones, this can damage your speaker.
• Please check the units condition after unpacking. If the outside of the carlon box has been damaged, inform your shipper immediately.

WARRANTY INFO

The warranty for hidden defects can only be considered if they appear within the 24-month warranty period. The warranty is not valid in case of misuse, wear, power surges, improper packaging or shipping, improper use or storage and failure to comply with Audibax recommendations. The product must be returned in the original packaging with proof of purchase made by an authorized distributor of Audibax

①

MOUNT THE SPEAKER

The loudspeaker is easy to install, due to its simple mounting system.

(1) Use the cutout template to mark the mounting hole.

(2) When making the hole in your mounting panel, double check if there are no cables or any other obstructions behind the mounting panel. Cutting the mounting panel without this check might result in damaged infrastructure or power lines. Please make sure that the mounting structure is capable of safely supporting the speaker's weight.

(3) Remove the speaker grille: turn the mounting clamps (dog-ears) outwards and push them in the direction of the grille until it pops out. Remove the grille.

(4) Turn the dog-ears inwards again and lighten the dog-ear screws slightly to make them stay in the inward position.

(5) Connect the speaker wires and insert the speaker in the precul speaker opening.

(6) Fosten the dog-ear screws carefully until the speaker sits safely in place. Do not overlighten the dog-ear screws!

(7) Carefully push the grille back in place.

SPECIFICATIONS LA-T

	Model	Model
Characteristics	LA05-T	LA06-T
Outside diameter	170mm	222mm
Depth	58mm	75mm
Loudspeaker system	1 way	1 way
Woofer size	4,5"	6,5"
Tweeter size	N/A	N/A
Impedance	8 ohmios	8 ohmios
Power	1,5w/3w/6w	1,5w/3w/6w
SPL	91	91
Frequency	150HZ-20KHZ	150HZ-20KHZ
Material	ABS	ABS
Grille material	Metal	Metal
100W Line	Yes	Yes

AUDIBAX

ALTAVOZ DE TECHO

Two circular diagrams showing concentric rings and a grid-patterned circle, no text or symbols present.

Serie LA-T

GUÍA DEL USUARIO