Silver Cross Eat&Play - High chair

Eat&Play - High chair Silver Cross - Free user manual and instructions

Find the device manual for free Eat&Play Silver Cross in PDF.

📄 6 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Silver Cross Eat&Play - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type High Chair
Brand Silver Cross
Model Eat & Play
Recommended Age Approximately 6 months to 3 years
Maximum Weight 15 kg (chair and table)
Harness Type 5-point harness (shoulder, waist, crotch straps)
Tray Adjustment 4 positions, adjustable with latches
Tray Cover Removable for cleaning
Chair-Table Connection Chair legs lock into table holes; release buttons under table
Cleaning – Chair and Table Wipe with damp cloth and mild soap
Cleaning – Seat Cover and Belts Hand wash only; do not bleach, tumble dry, or dry clean
Maintenance Regular inspection; lubricate moving parts with silicone oil
Safety – General Use only on flat, horizontal floor; never move with child inside; prevent climbing
Safety – Assembly Keep children away during assembly; ensure all parts are correctly fitted
Spare Parts Only use manufacturer-supplied or recommended parts
Manufacturer (UK) Silver Cross (UK) Ltd., Micklethorn, Broughton, Skipton, North Yorkshire BD23 3JA
Manufacturer (EU/Pacific) Silver Cross (Pacific) Ltd., Office 527, Lee Garden Three, 1 Sunning Road, Causeway Bay, Hong Kong

Frequently Asked Questions - Eat&Play Silver Cross

How do I assemble the Silver Cross Eat&Play high chair?
Insert the front legs into the front holes at the bottom of the seat until they click. Repeat for rear legs. Slide the seat cover onto the seat unit, aligning harness slots. Attach the tray by pulling the tray latches outwards, sliding it onto the armrest slots, and releasing the latches. For the table, connect the table plates with 4 bolts, screw in the table legs, and adjust feet for full contact with the ground.
How do I adjust the harness for my child?
To secure your child, connect the shoulder and waist straps and push them into the buckle until they click. Repeat for both sides. Press the buckle button to release. Slide the harness adjusters to achieve a comfortable fit. The harness can be removed for cleaning by passing each fixing back through the slots.
How do I clean the seat cover and harness?
Wash the seat cover and belts by hand only. Do not use bleach, tumble drying, or dry cleaning. The chair and table can be cleaned with a clean, damp cloth and mild soap.
What is the maximum weight and age for this high chair?
The high chair is intended for children from approximately 6 months to 3 years, with a maximum weight of 15 kg. The table also has a maximum capacity of 15 kg.
Can I use the chair without the table?
Yes, the chair can be used independently. The table is an optional accessory that connects to the chair by inserting the chair legs into the holes on the table. To separate, press the 4 release buttons on the underside of the table.
How do I attach the tray?
Locate the tray latches on either side of the tray and pull them outwards. Slide the tray onto the slots on the seat unit armrests and release the latches. The tray can be locked in 4 positions. The tray cover can be removed by releasing two catches at the sides and pulling upward.
What safety precautions should I follow?
Always check the security and stability before use. Ensure the harness is correctly fitted. Do not move or lift the product with the child inside. Do not use until the child can sit up unaided. Prevent climbing on the product. Keep away from open fires or strong heat. Place on a flat, even floor. Do not elevate the high chair on any structure.
How do I maintain the high chair?
Regularly inspect all parts for correct operation and signs of wear or damage. Lubricate moving parts with light silicone oil if needed. Only use replacement parts supplied or recommended by the manufacturer.
What should I do if a part is broken or missing?
Do not use the product if any part is broken, torn, or missing. Contact Silver Cross or an authorized retailer for genuine replacement parts. Only use manufacturer-supplied parts.
Can I disassemble the chair from the table easily?
Yes. Locate the 4 buttons on the underside of the table. Push each button to release each chair leg from the table. Then lift the chair away.

User questions about Eat&Play Silver Cross

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your High chair in PDF format for free! Find your manual Eat&Play - Silver Cross and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Eat&Play by Silver Cross.

USER MANUAL Eat&Play Silver Cross

High Chair Instruction Manual

IMPORTANT – READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
1.1 ⑦ ⑥ ⑤ ① ② ③ ④

Silver Cross Eat&Play - 2

Silver Cross Eat&Play - 3

Silver Cross Eat&Play - 4

Silver Cross Eat&Play - 5

Silver Cross Eat&Play - 6

Silver Cross Eat&Play - 7

Silver Cross Eat&Play - 8

Silver Cross Eat&Play - 9

CHILD CHAIR AND TABLE:
Line drawing of two toy furniture models: a small chair and a simple table, both without any text or symbols.

2.1 CLICK X4

Assembly
Insert the front two legs into two front holes at the bottom of the seat unit until the pin clicks into place. Insert the rear two legs in the same way.

Silver Cross Eat&Play - 12

3.1 3.2
Technical diagram showing mechanical assembly with labeled components and directional arrows, including a magnified section view labeled X4.

Connect the table plates together using 4 bolts.

Silver Cross Eat&Play - 14

4.1 4.2
Silver Cross Eat&Play - 15
Screw the table legs into the holes on the underside of the table.
Ensure that the feet are in the correct position on the ground. If necessary, rotate the feet to make full contact with the ground.

5.1
Line drawing of a chair with seat and armrest (no text or symbols)

Slide the seat cover onto the seat unit. Line up the harness slots on the seat cover with the harness slots on the seat unit. Pass the shoulder harness fixings through the upper slots, waist harness fixings through the lower slots and the crotch strap fixing through the slot on the seat base.

5.2 5.3
Line drawing of a helmet with hand positioning and close-up of the seat (no text or symbols)

Silver Cross Eat&Play - 18

6.1
6.1 X2

Locate the tray latches on either side of the tray and pull outwards. Slide the tray into the desired position on the slots on the seat unit armrests and release the latches.
The tray can be locked in 4 positions. Use the latches to adjust the position of the tray,

6.2 6.3
Technical line drawing of a mechanical assembly with two views: top shows internal components, bottom shows internal structure (no text or symbols)

7.1 X2

The tray cover can be removed by releasing 2 catches at either side of the cover and pulling upwards.

8.1
X4

To connect the chair to the table, locate the 4 holes on the table and connect the 4 chair legs into the holes until they lock into place securely.

Diagram showing a hand holding a pen with a dashed circle highlighting a point, and a checkmark indicating a confirmation (no text or symbols present)

9.1
X4

To separate the chair from the table, locate the 4 buttons on the underside of the table. Push each button to release each chair leg from the table.

Line drawing of a small chair and a small table with legs, no text or symbols present

HARNESS SYSTEM ADJUSTMENT

10.1
Line drawing of hands using a tool to adjust or install a component (no text or symbols visible)

10.2
Line drawing of hands holding a small object, possibly a device or tool, with no visible text or symbols.

To secure the harness, connect the shoulder and waist straps and push into buckle until they click into place. Repeat for both sides of harness.
To release the harness, press the buckle button.
Slide the harness adjusters to secure your child comfortably.
The harness can be removed for cleaning purposes. Pass each harness fixing back through the slots in the seat unit and seat cover.

10.3
Line drawing of hands holding a small mechanical component (no text or symbols)

10.4
CLICK

IMPORTANT – READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

CAUTION:

Read these instructions carefully before assembly and use and keep for future reference. The child may be hurt if you do not follow these instruction.

WARNINGS:

CLIMBING ON THE PRODUCT.

FALLING HAZARD: PREVENT YOUR

CHILD FROM CLIMBING ON OR STANDING ON THE TABLE.

DO NOT USE THE PRODUCT

UNLESS ALL COMPONENTS ARE CORRECTLY FITTED AND ADJUSTED.

BE AWARE OF THE RISK OF OPEN FIRES AND OTHER SOURCES OF STRONG HEAT IN THE VICINITY OF THE PRODUCT.

BE AWARE OF THE RISK OF TILTING WHEN YOUR CHILD CAN PUSH ITS FEET AGAINST A TABLE OR ANY OTHER STRUCTURE.

ALWAYS CHECK THE SECURITY AND THE STABILITY OF PRODUCT BEFORE USE.

MAKE SURE THAT ANY HARNESS IS CORRECTLY FITTED.

DO NOT MOVE OR LIFT THE PRODUCT WHILE THE CHILD IS INSIDE.

DO NOT USE THE PRODUCT UNTIL THE CHILD CAN SIT UP UNAIDED.

KEEP CHILDREN AWAY WHEN ASSEMBLING AND DISASSEMBLING THE PRODUCT TO AVOID INJURY.

HIGH CHAIR IS INTENDED

FOR CHILDREN FROM

APPROXIMATELY 6 MONTHS

TO 3 YEARS OR A MAXIMUM WEIGHT OF 15KG.

MAXIMUM CAPACITY FOR TABLE: 15KG.

POSITION THE HIGH CHAIR ON A FLAT, EVEN AND HORIZONTAL FLOOR AND DO NOT ELEVATE THE HIGH CHAIR ON ANY STRUCTURE OR TABLE.

DO NOT USE THE PRODUCT IF ANY PART IS BROKEN, TORN OR MISSING.

PRODUCT LOCATED UNDER A WINDOW COULD BE USED AS A STEP BY THE CHILD AND CAUSE THE CHILD TO FALL OUT OF THE WINDOW.

MAINTENANCE:

The product requires regular maintenance to keep it in good working order. Regular check all parts of the product to ensure that they are operating correctly and for signs of wear or damage.

Moving parts may be lubricated with a light silicone oil. Do not use this product if any part is broken, torn or missing and use only spares provided by the manufacturer.

Only replacement parts supplied or recommended by the manufacturer should be used.

CLEANING:

Chair and table: Wash with a clean and damp cloth and mild soap.

Seat cover and belts: Wash in hands. Do not bleach. Do not tumble-dry. Do not dry clean.

Silver Cross Eat&Play - CLEANING: - 1

UK

Silver Cross (UK) Ltd.

Micklethorn, Broughton, Skipton,

North Yorkshire BD23 3JA

EU/PACIFIC

Silver Cross (Pacific) Ltd.

Office 527, Lee Garden Three,

1 Sunning Road, Causeway Bay,

Hong Kong

Silver Cross

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Silver Cross

Model : Eat&Play

Category : High chair