BNO10AB - Washing machine Brastemp - Free user manual and instructions

Product Type	Top-Loading Washing Machine
Brand	Brastemp
Model	BNO10AB
Capacity	10 kg
Dimensions (W x D x H)	60 cm x 60 cm x 95 cm
Weight	55 kg
Power Supply	127 V / 220 V, 60 Hz
Power Consumption	1100 W
Spin Speed	1200 rpm
Number of Programs	12
Key Functions	Quick Wash, Delicate, Heavy Duty, Rinse & Spin
Safety Features	Child Lock, Overflow Protection, Unbalanced Load Detection
Maintenance	Clean lint filter regularly, check hoses annually
Spare Parts	Drum, motor, belt, pump, control board available
Repairability Score	7/10 - Modular design, common parts
Noise Level (Wash/Spin)	55 dB / 72 dB
Water Consumption	120 L per cycle (approximate)
Energy Rating	A+

Frequently Asked Questions - BNO10AB Brastemp

How do I install the washing machine?

Place the machine on a level surface, connect the water inlet hose to a tap, and plug the power cord into a grounded outlet. Ensure the drain hose is properly secured to a drain or sink.

What does the error code E1 mean?

Error code E1 indicates a water inlet problem. Check that the water tap is fully open and the inlet hose is not kinked or blocked. Also clean the inlet filter at the back of the machine.

How can I clean the lint filter?

Locate the lint filter (usually at the bottom right or inside the drum). Remove it, rinse under running water, and reinstall. Clean after every 5-10 cycles to maintain drainage performance.

The machine is vibrating excessively during spin. What should I do?

Ensure the transport bolts have been removed (if new). Check that the load is balanced by redistributing clothes. Also verify the machine is on a stable, level floor.

What is the maximum load for a quick wash?

For quick wash programs, load half the rated capacity (about 5 kg) to ensure effective cleaning and rinsing. Overloading may result in poor wash quality.

Can I use liquid detergent?

Yes, liquid detergent is suitable. Pour it into the detergent compartment (marked with II or liquid symbol). For front-loading, use the designated dispenser; for top-loading, add directly to the drum or dispenser.

How do I activate the child lock?

Press and hold the Child Lock button (often a padlock icon) for 3 seconds until the indicator lights up. To deactivate, repeat the process. This prevents accidental button presses during operation.

The door won't open after a cycle. What's wrong?

The door lock remains engaged for safety until the water drains and the drum stops. Wait 2-3 minutes after the cycle ends. If still locked, check if there is standing water; run a drain & spin program.

How often should I descale the machine?

In hard water areas, descale every 3 months using a washing machine descaler or a mixture of white vinegar and water. Run an empty hot cycle to remove limescale buildup.

What spare parts are commonly available?

Common spare parts include drive belt, water pump, door seal, control board, and shock absorbers. They can be purchased from authorized dealers or online. Use genuine Brastemp parts for best performance.

USER MANUAL BNO10AB Brastemp

IGUAZU W&D OPP (BRAZIL)

QUICK START GUIDE PT M11 WD

COD.

PN: W11612461

STM: W11612479

REV.

Rev.B 24/NOV/2022

LEGEND

BRASTEMP orange : Pantone 7579 C

Black : Pantone Black C

cut mark

OBS.

Dimensions:

110mm x 244,5mm

Colors:

1×2

Paper:

couché 250g

Finishing:

Matte lamination (bi-axially oriented polypropylene)

2 sides

Especial cut

STATUS

Completed

INSTALANDO A LAVA & SECA

www.com/brechenhorestics/assessental

CICLOS ESPECIAIS DE LAVAGEM E SECAGEM

LAVAR E SECAR am 50 min

The source image is illegible due to extreme pixelation and distortion. No text can be extracted.

superintio

1/2 (grado, 50 ml), 1,

An N. Levenne, da

中

repar de forma ge

Editor: J. R. Super

[Unreadable]

m = 311

ABASTECENDO O DISPENSER

IMPORTANTE: No. 2

guando a opoto and lawagon

法定代表人：

m = 311