Rectangular SHB345 - Cooker THETFORD - Free user manual and instructions

Product Type	Built-in Gas Hob
Brand	Thetford
Model	Rectangular SHB345
Dimensions (WxDxH)	580 x 510 x 90 mm
Weight	8 kg
Power Source	Gas (LPG/NG convertible)
Number of Burners	4
Burner Configuration	3 standard, 1 high-power
Safety	Flame failure device on each burner
Ignition	Automatic electronic ignition
Material	Stainless steel top
Cleaning	Easy-clean surface; remove pan supports for washing
Installation	Cut-out size: 560 x 490 mm
Gas Connection	1/2" BSP rear or side entry
Energy Efficiency	Class A (typical)
Certification	CE approved
Warranty	2 years
Accessories Included	Pan supports, burner caps, nozzle set for LPG/NG
Spare Parts Availability	Yes, through Thetford service network

Frequently Asked Questions - Rectangular SHB345 THETFORD

What gas types can this hob use?

The Thetford Rectangular SHB345 is convertible between LPG (propane/butane) and natural gas. An appropriate nozzle set is included for conversion.

What are the cut-out dimensions for installation?

The required cut-out size is 560 x 490 mm. Ensure adequate ventilation and a minimum distance of 50 mm from rear wall.

How do I clean the hob?

Allow the hob to cool. Remove pan supports and burner caps. Wipe the stainless steel surface with a damp cloth and mild detergent. Avoid abrasive cleaners. Burner caps can be washed in warm soapy water.

Does the hob have flame failure safety?

Yes, each burner is equipped with a thermocouple safety device that automatically shuts off the gas if the flame goes out.

What should I do if the ignition fails?

Check that the burner caps are correctly placed. Ensure the gas supply is on. Clean the ignition electrode with a dry cloth. If still failing, consult a qualified technician.

Can I use this hob with a wok?

A wok pan support is not included but may be available as an accessory. The high-power burner is suitable for wok cooking with a flat-bottomed wok.

What is the warranty period?

The Thetford Rectangular SHB345 comes with a 2-year manufacturer warranty covering defects in materials and workmanship, subject to proper installation and use.

Are spare parts available?

Yes, spare parts such as burner caps, pan supports, and nozzle sets are available through Thetford authorized service centers.

How do I convert from LPG to natural gas?

Conversion requires replacing the injectors. The hob comes with a nozzle set. Follow the instruction manual or have a qualified installer perform the conversion.

What is the recommended pan size for each burner?

Standard burners: pans up to 20 cm diameter. High-power burner: pans up to 24 cm. Ensure pan bases are flat and stable.

USER MANUAL Rectangular SHB345 THETFORD

ADDENDUM THETFORD HOB INSTALLATION MANUALS

For all hobs & combination units (hob & sink) this addendum replaces instructions related to the installation cabinetry dimensions described in chapter 6. Position and placement of the installation manual of the hob.

Picture 1: cabinetry locations

Make sure the installation is according to the following, referring to the distances indicated in table 1: ventilation & protection dimensions

■ Apply a minimum distance (A) from the lowest point of the hob, in all scenarios. And where the underneath of the hob is exposed, then a non-combustible heat shield at point A is mandatory.
■ Create a gas drop hole (B), which must vent to the outside of the leisure vehicle.
It is strongly recommended to cut a slot in the cabinet under the front of the worktop (C), to dissipate heat from under the appliance.

Table 1: ventilation & protection dimensions

A in mm B in mm C in mm
30	25-50	8x100