WAT100D - Contrôle de volume audio Speco Technologies - Free user manual and instructions

Product Type	Outdoor Bullet Camera
Brand	Speco Technologies
Model	WAT100D
Resolution	1080p Full HD (1920 x 1080)
Lens	2.8mm fixed lens
Field of View	90° horizontal
Night Vision	Up to 30m with IR LEDs
Video Output	Analog HD (HD-TVI/CVBS)
Power Supply	12V DC, 500mA (adapter included)
Power Consumption	Max 6W
Dimensions	70mm x 70mm x 180mm (LxWxH)
Weight	0.6 kg
Mount Type	Wall or ceiling mount with bracket
Housing Material	Aluminum alloy
Weatherproof Rating	IP67
Operating Temperature	-30°C to 60°C
Warranty	3 years limited
Included Accessories	Mounting kit, power adapter, manual

Frequently Asked Questions - WAT100D Speco Technologies

How do I connect the WAT100D camera to a DVR?

Use a coaxial cable (RG59) with BNC connectors. Connect the camera's video output to the DVR's video input. Power the camera with the included 12V DC adapter.

What is the maximum cable length for video transmission?

For HD-TVI signals, up to 300m (1000ft) using RG59 coaxial cable. For longer distances, consider a signal booster.

Does the camera support audio?

The WAT100D is a video-only camera. It does not have a built-in microphone or audio input.

How do I adjust the camera's viewing angle?

Loosen the mounting bracket screws, adjust the camera head, and tighten the screws. The bracket allows pan/tilt adjustment.

What is the night vision range?

The IR LEDs provide illumination up to 30 meters (98 feet) in complete darkness.

Can I use this camera indoors?

Yes, it can be used indoors, but it is designed for outdoor use with IP67 weatherproof rating.

What type of power supply is needed?

A 12V DC power supply with at least 500mA output. The included adapter is suitable for most installations.

How do I clean the camera lens?

Gently wipe the lens with a microfiber cloth. For stubborn dirt, use a small amount of lens cleaning solution. Avoid abrasive materials.

Is the camera compatible with existing analog systems?

Yes, it supports both HD-TVI and legacy CVBS (analog) output. Check your DVR compatibility.

What is the warranty period?

Speco Technologies offers a 3-year limited warranty. Contact support for warranty claims.

USER MANUAL WAT100D Speco Technologies

Thank you for your choice of Speco Technologies' WAT100D volume control. This unit is designed and manufactured to provide a stylish and high-power alternative to conventional commercial volume controls. For your convenience and to match many standard decors, 3 color choices for plate and slider knob are included with this unit.

INSTALLATION INSTRUCTIONS:

1) The WAT100D includes 3 color choices: Ivory, White and Almond.
2) BEFORE installing the unit into the wall, select your desired color.
3) Insert the appropriate color slider into the slider plate. To insert, place it vertical inside the cavity and then twist it in.

White plastic tray with two blue directional arrows indicating flow or movement (no text or symbols)

4) If the unit already has a slider plate attached to the unit, and you wish to use a different color, simply press both tabs on one end forward from the rear of the unit at the same time to remove.

Close-up of a metallic electrical component with two circular annotations highlighting features (no readable text or symbols)

5) Slide the black plate on the unit all the way to the top.
6) The slider knob has grooves to align with the ridges on the black plate attached to the control. Make sure the slider knob is also all the way to the top, and then connect the entire assembly to the volume control. You can tell if you have aligned the knob correctly if it does not slide down on its own while turning the entire volume control up and down. There should be the slightest resistance and you can feel the steps of the volume control.

Close-up of a mechanical component with two yellow circles highlighting features, no visible text or symbols

7) To wire, you should remove the phoenix connector on the back of the unit for easier connection.

8) The arrow signifies negative (-) polarity. For the input from your amplifier, wire the negative wire to the arrow, and the positive to the “in” terminal. For output to the speakers, negative wire to arrow, and positive wire to “out.”

Close-up of four metallic rectangular electronic components with 'IN' and 'OUT' labels, no readable text or symbols beyond component markings

WARNING: DO NOT CONNECT MORE THAN 100 WATTS OF 70V or 25V SPEAKERS TO THIS UNIT OR YOU RISK DAMAGING YOUR SPEAKERS, AMPLIFIER AND/OR VOLUME CONTROL. DO NOT REVERSE IN AND OUT CONNECTIONS OR RISK DAMAGING EQUIPMENT. ALSO ENSURE YOUR AMPLIFIER CAN HANDLE 100W OF SPEAKERS. IF YOU HAVE ANY DOUBT AT ALL ABOUT ANY ASPECT OF INSTALLATION, PLEASE CONTACT A QUALIFIED INSTALLER.

9) Using the screws provided, install the completed assembly into a single gang electrical work box, approximately 18 cubic inches or greater. An open back electrical box or plaster ring may be more convenient to work with. Note: Avoid mounting the WAT100D next to AC lines or dimmers.

Technical diagram of an electrical switch assembly showing internal components and mounting holes (no text or labels)

SPECIFICATIONS:

• For up to 100W of 70V or 25V speakers
• 12-position soft-touch slider switch
• Total attenuation at 33dB
• Fits most standard single gang high-cube junction box
- Removable screw clamp connector
- Accepts up to 12 GA wire

WARRANTY INFORMATION:

We warranty this product to be free from any manufacturing or material defects for two (2) years from the date of purchase.

This warranty will not extend to any products which have been subjected to misuse, neglect, accident, or improper installation, used in violation of instructions furnished by us; or to units which have been repaired or altered outside of the factory. This limited warranty does not apply to broken cases, batteries, or other physically damaged parts.

Upon request by the customer, Speco Technologies (“The Company”) will, at the customer's expense, repackage merchandise in new cartons, replace missing accessories, and return in resalable condition. Unless requested, the company will replace and return all merchandise in the packaging in which it was received. This warranty is in lieu of all expressed warranties, expressed or implied, and of all obligations or liability on our part, and we neither assume nor authorize any representative or other person to assume for us any obligation or liability. In no event shall we be liable for incidental or consequential damages arising from the use of the product, or for any delay in the use of this product due to causes beyond our control. Some states do not allow limitations of how long an implied warranty lasts and/or do not allow the exclusion or limitation of consequential damages. The above limitations on implied warranty and consequential damages may not apply to you. This warranty gives you specific legal rights. You may have other rights which vary from state to state. See actual warranty statement included with product for limitations and exclusions where applicable. This limited warranty extends to products listed in the company's current price schedule.