Triple Foot Controller - Pédalier de commande Electro Harmonix - Free user manual and instructions

Brand	Electro Harmonix
Model	Triple Foot Controller
Product Type	Foot Controller / Pedalboard Switcher
Dimensions (L x W x H)	11.5 x 3.5 x 2.5 inches (29.2 x 8.9 x 6.4 cm)
Weight	1.8 lbs (0.82 kg)
Power Supply	9V DC (center negative, 2.1mm barrel), 100 mA minimum
Controls	Three heavy-duty footswitches
Indicators	Three LED status lights (one per switch)
Switching Type	True bypass or relay-based (depending on connected device)
Compatible Devices	Electro Harmonix pedals with remote switch input (e.g., Deluxe Memory Man, Superego)
Construction	Steel chassis with rugged rubber base
Input / Output Connectors	Three 1/4" TS jacks (tip-sleeve) for connecting to pedals
Power Connector	Standard 2.1mm barrel jack, center negative
Current Draw	Approximately 50 mA at 9V DC
Warranty	One year limited warranty (extendable with registration)
Maintenance	Clean with a soft, dry cloth; avoid liquids and abrasives
Safety Precautions	Use only the specified power supply; do not expose to moisture or extreme temperatures
Spare Parts Availability	Contact Electro Harmonix customer service for replacement footswitches or jacks
Repairability	Modular design allows replacement of switches and jacks by a qualified technician
Manufacturer Support	Online support, manuals, and parts available at ehx.com

Frequently Asked Questions - Triple Foot Controller Electro Harmonix

How do I connect the Triple Foot Controller to my Electro Harmonix pedal?

Use a standard 1/4" TS instrument cable to connect one of the controller's jacks to the remote/expression input on your EHX pedal. The pedal must have a dedicated remote switch input.

Can I use the controller with non-EHX pedals?

The controller is designed for EHX pedals with remote inputs, but may work with other brands if the switching logic is compatible (typically latching momentary). Check your pedal's manual.

What power supply do I need?

The Triple Foot Controller requires a 9V DC power supply with center negative polarity and a 2.1mm barrel connector. Current draw is less than 100 mA, so most standard pedal PSUs will work.

Can I use battery power?

No, the Tripple Foot Controller does not have a battery compartment and must be powered via the 9V DC input.

Do the footswitches require a special cable?

Standard 1/4" TS (tip-sleeve) instrument cables are sufficient. For best performance, use a dedicated mono cable.

How do I know which LED corresponds to which footswitch?

Each footswitch has an LED directly above it. The LED lights up when the switch is activated (depending on the connected pedal's behavior).

What are the dimensions of the Triple Foot Controller?

Approximately 11.5 x 3.5 x 2.5 inches (29.2 x 8.9 x 6.4 cm). It is designed to fit on most pedalboards.

Is the controller true bypass?

The switching method depends on the connected pedal. When used with EHX pedals that support true bypass via remote, the controller will provide true bypass operation.

Can I use the controller to switch multiple functions on one pedal?

Some EHX pedals (like the Superego) allow different functions to be assigned to each remote switch. Consult your pedal's manual for configuration options.

Where can I find the user manual?

The user manual is available for free download on the manufacturer's website (ehx.com) or on third-party manual sites like notice-facile.com.

USER MANUAL Triple Foot Controller Electro Harmonix

Congratulations on your purchase of the Electro-Harmonix Triple Foot Controller! The Triple Foot Controller is a compact, easy-to-use utility pedal providing remote foot-control for devices with external footswitch jacks. It works great with the Electro-Harmonix Grand Canyon® Delay & Looper, 720 Stereo Looper™, Superego+™ Synth Engine, Mod Rex™ Polyrhythmic Modulator, Super Pulsar™ Tremolo, and many other pedals and devices made by both Electro-Harmonix and other manufacturers. The Triple Foot Controller can also be used as an external tap-tempo footswitch for a large variety of pedals.

- USING THE TRIPLE FOOT CONTROLLER -

Use the supplied Tip-Ring-Sleeve (TRS) cable* to connect the Triple Foot Controller (TFC) to the device you want to control. Attach the cable to the phonejack on the TFC and to the proper jack on the device it controls. We recommend the device be powered down while making the connection.

The Triple Foot Controller has three footswitches. The switch polarity for all three footswitches is normally open (NO). They work as follows:

T – When this switch is pressed down, the Tip and Sleeve are electrically shorted together. If you connect a standard Tip-Sleeve (TS) instrument cable to the TFC, only the T footswitch provides control to the other device.

R – When this switch is pressed down, the Ring and Sleeve on the TRS cable are electrically shorted together.

T+R – When this switch is pressed down, both the Tip and Ring are electrically connected to the Sleeve of the TRS cable. The T+R footswitch simultaneously activates both the Tip and Ring on the TRS cable. When using a TS cable, the T+R footswitch might also activate the T conductor.

Please note: the exact function of each TFC footswitch depends on the device to which it is connected. Please refer to the device's user manual for more information on the functions assigned to each TFC footswitch.

- WARRANTY INFORMATION -

Please register online at http://www.ehx.com/product-registration or complete and return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a product that fails to operate due to defects in materials or workmanship for a period of one year from date of purchase. This applies only to original purchasers who have bought their product from an authorized Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the unexpired portion of the original warranty term.

If you should need to return your unit for service within the warranty period, please contact the appropriate office listed below. Customers outside the regions listed below, please contact EHX Customer Service for information on warranty repairs at [e-mail] or [phone]. USA and Canadian customers: please obtain a Return

Authorization Number (RA#) from EHX Customer Service before returning your product. Include—with your returned unit—a written description of the problem as well as your name, address, telephone number, e-mail address, RA# and a copy of your receipt clearly showing the purchase date.

United States & Canada Europe

EHX CUSTOMER SERVICE JOHN WILLIAMS

ELECTRO-HARMONIX ELECTRO-HARMONIX UK

c/o NEW SENSOR CORP. 13 CWMDONKIN TERRACE

47-50 33RD STREET SWANSEA SA2 ORQ

LONG ISLAND CITY, NY 11101 UNITED KINGDOM

Tel: [phone] Tel: [phone]

Email: [e-mail]

Email: [e-mail]

To hear demos of all EHX pedals visit us on the web at www.ehx.com Email us at [e-mail]