SKH-M2TB-B - Light signaling PATLITE - Free user manual and instructions

Product Type	Rotating Beacon with Buzzer
Model	SKH-M2TB-B
Brand	PATLITE
Rated Voltage	100-240 V AC (50/60 Hz)
Power Consumption	Approx. 10 W (estimated)
Light Source	LED (estimated)
Buzzer	Built-in (B variant)
Protection Rating	IP65 (estimated)
Operating Temperature	-20°C to +50°C (estimated)
Installation Type	3-Screw Mounting or 2-Point Hole Mounting
Wiring	Terminal block; M2 type (external contact control)
Enclosure Material	Polycarbonate (estimated)
Dimensions (approx.)	Diameter: 100 mm, Height: 150 mm (estimated)
Weight (approx.)	0.5 kg (estimated)
Compliance	CE, FCC Class A, RoHS
Accessories Included	Mounting bracket, nuts, washers, waterproof sheet
Cleaning	Wipe with soft cloth moistened with water; avoid solvents
Safety Precautions	Disconnect power before maintenance; use fuse in circuit
Repair Parts	Order from PATLITE website or authorized dealer
Warranty	Standard manufacturer warranty (check PATLITE)

Frequently Asked Questions - SKH-M2TB-B PATLITE

What is the rated voltage of the SKH-M2TB-B?

The SKH-M2TB-B operates on 100-240 V AC (50/60 Hz).

How do I install the beacon?

Use the included mounting bracket and screws. For 3-screw mounting, insert bolts into the mounting surface and secure with nuts and washers. For 2-point hole mounting, attach the bracket to the surface and lock the main unit by turning clockwise.

Can I use the SKH-M2TB-B outdoors?

Yes, it has an IP65 rating (estimated), making it suitable for outdoor use. Ensure the cable ends are sealed to prevent water ingress.

Does the SKH-M2TB-B have a buzzer?

Yes, the 'B' in the model indicates a built-in buzzer for audible alerts.

How do I wire the beacon?

Disconnect power before wiring. For M2 type, connect power to terminals as per the installation manual. Do not blink control by turning power ON/OFF; use an external contact (relay) instead.

What is the recommended fuse rating?

Use a 250V 1A fuse in the power line to protect against short circuits.

How do I clean the beacon?

Clean the globe with a soft cloth moistened with water. Do not use solvents, thinners, or abrasive cleaners.

What should I do if the beacon malfunctions?

First, check the fuse and wiring. If the issue persists, contact PATLITE support or visit www.patlite.com for repair parts and service.

Is the SKH-M2TB-B compliant with safety standards?

Yes, it meets CE (EMC, RoHS) and FCC Class A standards. It is intended for commercial use, not residential.

Where can I find the full user manual?

The manual is available for free download on notice-facile.com or the PATLITE website. It covers installation, wiring, and maintenance in detail.

USER MANUAL SKH-M2TB-B PATLITE

INSTRUCTION MANUAL Rotating Beacons

TYPE SKS / SKH / SKP

Multi-function Beacons

TYPE SF08 / SF10

Flashing Beacons

TYPE SL08 / SL10 / SL15

Notice to Customer

Thank you very much for purchasing our Patite products.
- Request the installation and wiring be performed by a professional apparatus if construction work is involved.
- Prior to installation, read this manual thoroughly before using this
product to ensure correct use.
- In addition, please store this manual for future performing maintenance repairs or inspections
•For pensions and repair parts, please visit our website
(https://www.pallite.com).
- If there are any questions concerning this product, refer to the contact information at the end of the degree of contact.
Information at the end of this document and contact your nearest BATLIFE Sales Recommendation

PALENE GREEN REP

1 Read this First (Safety Precautions)

Warning Failure to observe the following may result in

Warning death or serious injury.
- To prevent from short-circuits or damage, observe the following:
- Be sure the power is disconnected before replacement or repair, including the replacement at the fuse.
- Use this product in a properly restrained condition. (Replace or repair if the
gctbe, case, cts. are damaged.)
■ If following the product, it includes construction costs, ask a special case in order to several fees, or personnel injury.
- When this product is used for security purposes, it should be inspected only.
In case a malfunction should occur, it is recommended that you use this product together with other non-phyri procure.
- After installation, do not use this product to climb up onto the equipment with.

Failure to comply will result in product damage and/or failing off the machinery.

Caution Failure to comply with the following points may

Caution result in injury, physical loss or damage.

- Be sure to put a fuse in the wiring circuit between the power source and

equipment for protection. If a fuse is not added, it may result in product and/or equipment failure.

- Be sure to prevent electrostatic damage due to discharge when working with

this product for wiring, exchanging units, selling up parameters, etc. by

The following side: which they do your body, he:

Do not disassessments of citizen during operations

2 Model Number Configuration

- SE4 SI Models

R1
2018年1月1日

KT

[1] J. H. G. M. L. B. E. R.

• 050 • 12 - 24 V DC • 2-point hole type mounting - Tammal blocks

■ Terminal block type T KT

Accessory List

	Name/Model	QTY
SF□□□□KT/SL□□□□KT	Mounting Bracket, Waterproof Sheet	1
SF08-□□J5L06-□□J5KS Model	M4 Nut, Plain Washer	3
SF 10-□□J5L10-□□J5KII Model	M5 Nut, Plain Washer	3
SL-15-□□J5KP Model	M8 Nut, Plain Washer	3

4 Installation

■ 3-Screw Mounting Type J T

(1) Insert the bolts of the beacon into Installation Example

the holes of the mounting surface.

(2) Use the nuts and washer

(accessory) to secure in place

Maximum Board Thickness of Mounting Surface

Installation Dimensions

Refer to the "Installation Manual"

■ 2-point Hole Type Mounting (SF • SL Models)

3-point Hole Type Mounting (SL15 Model Only) RT

(1) Use the screws or balls, nuts, to secure the mounting bracket

(accessory) to the mounting surface. (installation comms and nuts are not included with this product

(Installation screws and holes are not included with this product. Binding head screws or pan head screws are recommended.)

Model	Screw Hole Depth of Moundry Bracket	Nominal Diameter
SF00*SL00	4.5 mm	M4
SF10*SL10	5.7 mm	M5
SL15	4.8 mm	M8

(2) Check that the O-ring is not twisted

(3) Align the main unit of product with the positioning Indicator and turn it clockwise to lock it.

Installation Example

2-point Hole Type Mounting Special Hole Type Mounting

Installation Dimensions

Refer to the "Installation Manual"

Caution • Use a soft rithm moistened with water to clean 2 = globe or ocean. (In not use 2 inches, 100 inches, coarse or oil)

Note The type with a buzzer, if the buzzer opening is splashed with water, the Sound Pressure Level may drop.

5 Wiring

Caution • Make sure the power is OFF before wing. A short circuit
may damage Internal circuits.
• Ensure damage.
• Do not pull the wire, or stuff it inside of this case.
- Be sure the wiring is done properly. Any mistake in wiring may result in damage
- In the M2 mode, do not perform blinking control by turning the power supply ON/OFF. Any mislase in wiring may result in damage.
- Do not apply a voltage to the common wire. (M1 type)
Do not apply a voltage to any wire other than the power supply wire. (M2 type)
• Do not express the wiring from the device. If screen is applied to the wire, the
wiring may be disconnected, resulting in a short circuit or an electric shock.
- Use either a Contact Switch or Contact Relay for External Contact that power is connected to SE, St., SK, Mshk, and Lwau on the of SK, Mshk. Ensure power
Supply demand of 21F, 22F, 23F (in thousands of m/w) from 218 billion. Part-time company may result in first, product malfunction.

Notice • The protection rating does not include the Cavitye Cable

erds. If too ends of the it are a master with writer or evened to draw or

conderation, refer to the indications below to draw the wire ends for water

The following table provides the information in the United States:

- Correct the it ends in a location which will not expose the ends to water.

- Use filters, such as silicon, etc., to seal the ends.

[External contact capacity of power supply who]

	M1	M2
Current Capacity (b)	3A or more	1A or more

[External contact capacity of signal wire and buzzer wire]

SE + SE - Ncdnke

	M1	M2
Current Capacity (Is)	10 mA or more	10 mA or more
Wheat and Voltage (Vs)	20 V or more	20 V or more
Leakage Curver (L)	0.1 mA or less	0.1 mA or less

- When using an NPN open collector transistor

SK Model

	M1	M2
Current Capacity (kV)	0.5 A or more	0.5 A or more
Wired Voltage (Vdc)	35 V or more	20 V or more

[Fuyn]

Fur Raim 250V1A

Wire Type / Wire Gauge

Wire Type : UL2454

Wm Cenin 101 A/W22

二

M2 Power Supply Wm AWG18

Exciting Power Supply wire: A77521

Wiring Example

Refer to the "Installation Manual".

Terminal Block Wiring

6 Specifications

Model	Rated voltage
SF08-M1,SF1C-M1	12 - 24 V DC (Non-polar)
SF08-M2,SF1C-M2	100 - 240 V AC (5060 Hz)
SL08-M1,SL10-M1,SL15-M1	12 - 24 V DC (Non-polar)
SL08-M2,SL10-M2,SL15-M2	100 - 240 V AC (5060 Hz)
SKS M1/SKH M1/SKP-M1J	12 - 24 V DC (Non-polar)
SKS-M2/SKH-M2/SKP-M2J	100 - 240 V AC (5060 Hz)
SKH-M1T	12 - 24 V DC (Non-polar)
SKH-M2T	100 - 240 V AC (5060 Hz)

Conformity Standards

• EMC Directive (EN61000-9-4, EN61000-9-2)

• RoHS Directive (ENSC581

• CLHIS, CBA-C22.2 No. 14 (File No. EXTRIM) • ECG-Part 15 Schmid B Class 0

This product conforms to EN standards and shows the CE Marking.

This product has been tested and found to comply with the In-Is for a Class A device, pursuant in LMC DIRECTED. These limits we designed in process

researchable protection, social harmful interference when the equipment is occupied in

a commercial sentiment. This product must not be used in residential sales.

*Continuity is FCC Comptnities* This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 16 of the FOC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

opercise in a commercial environment. The equipment generates, uses and can

Isolar/radio frequency energy data, it is not malated and used in social science with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

Incorrhance in which case the user will be required to correct the interference at his own expense.

Theorem 4.2.10

(Note: • Dimensions set specifications may change without notice due to

continental product improvement

- PATLITE AND THE PATLITE Eng a subscale, or registered subscale of the PATLITE Corporation of local and corporate

THE ATLITE CORPORATION OF S&P500 AND WEALTHY

computer for ED;