SF10-M1KTN-G - Signalisation lumineuse de sécurité PATLITE - Free user manual and instructions

Product Type	Signal Tower / Stack Light
Model	SF10-M1KTN-G
Brand	PATLITE
Color Configuration	Red, Amber, Green (3-tier)
Light Source	LED (incandescent optional)
Sound Output	Integrated buzzer, adjustable tone
Operating Voltage	24 V DC
Power Consumption	Max 5 W
Protection Rating	IP65 (dust-tight, water jets)
Mounting Type	Direct mounting or pole mount
Dimensions (H x D)	250 mm x 60 mm
Weight	Approx. 0.5 kg
Housing Material	Polycarbonate (PC) / ABS
Operating Temperature	-20°C to +50°C
Wiring Method	Screw terminals (M20 cable gland)
Control Inputs	NPN/PNP compatible
Lamp Life	≥ 50,000 hours (LED)
Standards Compliance	CE, RoHS
Included Accessories	Mounting bracket, instruction manual
Maintenance	Clean with soft, dry cloth; avoid solvents
Spare Parts	Replacement LED modules and buzzer units
Repairability	Modular design; replaceable tiers

Frequently Asked Questions - SF10-M1KTN-G PATLITE

What is the power supply requirement for the PATLITE SF10-M1KTN-G?

The device operates on 24 V DC power supply. Ensure correct polarity during wiring.

How do I change the color of the light modules?

The SF10-M1KTN-G comes with pre-configured colors: Red, Amber, Green. Color can be changed by replacing the corresponding LED module in each tier.

Is the sound output adjustable?

Yes, the integrated buzzer has an adjustable tone via a small potentiometer or DIP switch inside the unit. Refer to the manual for exact location.

What is the IP rating and is it suitable for outdoor use?

The IP65 rating means it is dust-tight and protected against water jets. It is suitable for outdoor use in most weather conditions.

Can I mount this signal tower on a ceiling or wall?

Yes, direct mounting on a flat surface using the provided bracket is possible. For pole mounting, optional adapters are available.

How do I clean and maintain the signal tower?

Use a soft, dry cloth to clean the outer surface. Avoid abrasive cleaners or solvents that may damage the polycarbonate lenses.

What is the expected lifespan of the LEDs?

The LED modules have a rated life of ≥ 50,000 hours under normal operating conditions.

Are replacement parts available for this model?

Yes, PATLITE offers replacement LED modules and buzzer units as spare parts. Contact a distributor for specifics.

How do I wire the signal tower for multi-color operation?

Each tier has separate terminals for common (+24V) and individual color inputs. Connect to a controller with NPN or PNP outputs as per the wiring diagram.

What should I do if the lights are flashing erratically?

Check for loose wiring or incorrect voltage. Ensure the power supply is stable and meets the 24V DC specification. Reset the device by power cycling.

USER MANUAL SF10-M1KTN-G PATLITE

INSTRUCTION MANUAL Rotating Beacons

TYPE SKS / SKH / SKP

Multi-function Beacons

TYPE SF08/SF10

Flashing Beacons

TYPE SL08 / SL10 / SL15

Notice to Customer

Thank you very much for purchasing our Patite products.
- Request the installation and wiring be performed by a professional apparatus if construction work is involved.
- Prior to installation, read this manual thoroughly before using this
product to ensure correct use.
- In addition, please store this manual for future performing maintenance repairs or instructions
•For petitions and repair parts, please visit our website
(https://www.pallite.com).
- If there are any questions concerning this product, refer to the contact information at the end of the degree of contact.
Information at the end of this document and contact your nearest BATLIFE Sales Recommendation

PALENE GREEN REP

Read this First (Safety Precautions)

Warning Failure to observe the following may result in

1. In oural law, the cause of death, gives the influence
2. To prevent from protective damage, observe the following:
3. Be sure the power is disconnected before replacement or repair, including the
   replacement of the fuse.
4. Use this product in a properly maintained condition. (Replace or repair if the
   gede, case, cie. are damaged.;
5. If increasing risk profile, requires bioimbursement work, ask a special case in order to avoid free or penalized injury.
6. When this product is used for security purposes, it should be inspected only.
   In case a malfunction should occur, it is recommended that you use this
7. After installation, do not use this product to climb up only the equipment with.
   Failure to comply will result in product damage and/or falling off the machinery.

Caution Failure to comply with the following points may result in injury, physical loss or damage.

- Be sure to put out a lot in the wide way, it is possible for the previous year.

- Be sure to put a label for the writing of an unknown the power source and equipment for protection. If a fuse is not asked, it may result in product pricing

equipment for equipment is made part of mode, fully feature to produce an un- squipment and failure.

- Be sure to prevent electrostatic damage due to discharge when working with

this product for wiring, exchanging units, selling up parameters, etc. by

The following table: which is by you today, the

• Do not disassessments or deacch during operation

2 Model Number Configuration

K1

■ Terminal block type T KT

Accessory List

	Name/Model	QTY
SF□□□□KT/SL□□□□KT	Mounting Bracket, Waterproof Sheet	1
SF08-□□J5L06-□□J5KS Model	M4 Nut, Plain Washer	3
SF 10-□□J5L10-□□J5KII Model	M5 Nut, Plain Washer	3
SL-15-□□J5KP Model	M8 Nut, Plain Washer	3

4 Installation

■ 3-Screw Mounting Type J T

(1) Insert the bolts of the beacon into

the holes of the mounting surface

(7) Use the suits and wethers

(2) Use the nuts and washer (appropriate) to secure in place

(Accessory) to secure in place

Installation Example

Maximum Board Thickness of Mounting Surface

Installation Dimensions

Refer to the "Installation Manual"

■ 2-point Hole Type Mounting (SF • SL Models)

3-point Hole Type Mounting (SL15 Model Only)

(1) Use the screws or balls, nuts, to secure the mounting bracket

(accessory) to the mounting surface.

(installation screws and nuts are not included with this product.

Model	Screw How Desh of Mounting Bracket	Nominal Diameter
SF00*SL00	4.6 mm	M4
SF10*SL10	5.7 mm	M5
SL15	4.8 mm	M8

(2) Check that the O-ring is not twisted.

(3) Align the main unit of product with the positioning indicator and turn it clockwise to lock it.

Installation Example

2-point Hole Type Mounting 3-point Hole Type Mounting

Installation Dimensions

Refer to the "Installation Manual"

Caution • Use a soft rith moistened with water to clean 2 = globe or ocean. (In not use 2 inches, 100 inches, coarse or oil)

Note The type with a buzzer, if the buzzer opening is splished with water, the Sound Pressure Level may drop.

5 Wiring

Caution • Make sure the power is OFF before wing. A short circuit
may damage internal circuits.
- Ensure the proper working voltage is used. Any mistake in wiring may result in
damage.
• Do not pull the wife, or stuff it inside of this case.
- Be sure the wiring is done properly. Any mistake in wiring may result in damage
- In the M2 mode, do not perform blinking control by turning the power supply ON/OFF. Any mislabeling can give our result in demand
• Do not apply a unit to the common extra /\$1 euro
Do not apply a voltage to any wire other than the power supply wire (M2 type)
Failure to comply with result in product damage (except burden wire of SKH-M1)
- Do not expose the wiring from the device. If tension is applied to the wiring, the
wiring may be disconnected, resulting in a short circuit or an electric shock.
- Use either a Contact Switch or Contact Relay for External Contacts that power
supply area of SR, SL, SR thickness and in/are area of SK DuBe. Future comply with use shall be for each well-position.

http://www.p5w.com.cn

Notice • The protection rating does not include the Cabryne Cable

endz

If the ends of the it are in portant with water or exposed to them or

condensation, refer to the indications below to draw the wire ends for water

revidence.

- Connect the ends in a location which will not expose the ends to water.

[External contact capacity of power supply who]

	M1	M2
Current Capacity (b)	3A or more	1A or more

[External contact capacity of signal wire and buzzer wire]

SE + SE Medate

	M1	M2
Current Capacity (Is)	10 mA or more	10 mA or more
Wheat and Voltage (Vs)	20 V or more	20 V or more
Leakage Curver (L)	0.1 mA or less	0.1 mA or less

- When using an NPN open collector transistor

OK Under

	M1	M2
Current Capacity (kV)	0.5 A or more	0.5 A or more
Wired Voltage (Vdc)	35 V or more	20 V or more

[Fuyn]

Fur Raim 250V1A

Wire Type / Wire Gauge

Wire Type : UL2454

Wm C on □15 AVI022

二

M2 Power Supply Woe A/WG18

Excluding Power Supply wire: A77524

Wiring Example

Refer to the "Installation Manual".

Terminal Block Wiring

1. Align a flathead screwdriver in the groove of

the lever. Press down to release the lock.

Conformity Standards

• EMC Directive (EN61000-9-4, EN61000-9-2)

• RoHS Directive (ENSC581

• CLHIS, CBA-C22.2 No. 14 (File No. EXTRIM) • ECG-Part 15 Schmid B Class 0

• 100% of the European

This product conforms to EN standards and shows the CE Marking.

This product has been tested and found to comply with the In-Is for a Class A device, pursuant in LMC DIRECTED. These limits we designed in process

researchable protection, social harmful interference when the equipment is occupied in

a commercial environment. This product must not be used in residential areas.

*Conformity to FCC Compliance

This equipment has been fasted and found to comply with the limits for a Class A digital centre, pursuant to Part 16 of the PCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. The equipment generates, uses, and can radiate radio frequency energy, and if not installed and uses in accordance with the Australian manual, may cause harmful interference on radio communications. Operations of this equipment in a continental area is likely to cause harmful interference in which case the user will be required so correct the interference at this own expense.

(Note): • Dimensions set specifications may change without notice due to

continental product improvement

- PATLITE AND THE PATLITE Eng a subscale, or registered subscale of the PATLITE Corporation of local and corporate

THE ATLITE CORPORATION OF S&P500 AND WEALTHY

computer for ED;