SWKA4500 - Food storage container SWAN - Free user manual and instructions

Type	Food storage container
Brand	Swan
Model	SWKA4500
Material	Plastic (BPA-free)
Capacity	1.5 liters
Dimensions (L x W x H)	18 x 13 x 8 cm
Weight	150 g
Closure type	Snap-fit lid
Microwave safe	Yes (without lid)
Freezer safe	Yes
Dishwasher safe	Yes (top rack)
Stackable	Yes
Leak-proof	Yes
Color	Transparent with blue lid
Maintenance	Wash with mild soap and warm water
Safety	BPA-free, food-grade material
Spare parts available	Lids sold separately

Frequently Asked Questions - SWKA4500 SWAN

Can I use this container in the microwave?

Yes, the container is microwave safe. However, remove the lid before microwaving to avoid pressure buildup.

Is the container freezer safe?

Yes, it is safe for freezing. Leave some space for expansion, and ensure the lid is not airtight to prevent cracking.

Can I put it in the dishwasher?

Yes, place it on the top rack of the dishwasher. High heat on the bottom rack may warp the plastic.

Is the material BPA-free?

Yes, the container is made from BPA-free plastic, safe for food storage.

Are the lids interchangeable with other sizes?

Lids are designed specifically for this model. For replacement, use Swan spare lids for SWKA4500.

How do I clean stubborn stains?

Soak the container in a mixture of baking soda and water, then scrub gently. Avoid abrasive cleaners.

Can I store hot food directly?

Allow food to cool to room temperature before placing in the container to avoid warping.

Is the container stackable?

Yes, the design allows stable stacking. Align the lids properly to save space.

What is the maximum temperature for dishwasher use?

Do not exceed 65°C (149°F) during dishwashing. High temperatures can deform the plastic.

Does the lid seal tightly?

The snap-fit lid provides a leak-proof seal when properly closed. Check that the rim is clean before sealing.

USER MANUAL SWKA4500 SWAN

SWKA4500 (all colours)

Help line 01733 404703

Swan Retro

designed for life

IMPORTANT INFORMATION

GETTING THE BEST FROM YOUR SENSOR BIN

Thank you for choosing this Swan sensor bin. Please read these instructions carefully, they will tell you how to get the best out of your product. Swan sensor bins are made from high grade, materials that will look great and give many years of faithful service

1. Open the cover of the battery case at the bottom of the Lid and equip it with four batteries "AA" observe correct polarity.
2. Place the bin liner in the center of the bin and fold the top of the bag over the edge of the bin. Then place the retaining ring over the liner to secure it into position.
3. Turn on the power switch at the bottom of the lid. The red indicator light will be on for 2 seconds. And then it flashes once every 4 seconds which shows that the sensor system is working properly.
4. When putting rubbish into it, keep your hand/object about 5-15cm in front of the inductive window, the lid will open automatically within 0.5 seconds, then it will close automatically in about 5-6 seconds after your hand/object is removed from the sensor area. Keeping your hand/object within the sensor area which will keep it open.
5. The indicator light flashes red (every 4 seconds). When the lid opens, the indicator light shows yellow. When the lid closes, the indicator light shows red.
6. The batteries can last about 3-6 months, assuming the dustbin opens and closes 20 times one day. High-alkaline batteries can last up to 2 years on standby only.
7. Do not discard spent batteries in household waste. Always dispose of at recycling centre.

2 YEAR WARRANTY

This product is guaranteed for 2 years from the date of original purchase. If any defect arises due to faulty materials or workmanship, the faulty products must be returned to the place of purchase. Refund or replacement is at the discretion of the store. The following conditions apply:

• The product must be returned to the retailer with proof of purchase.
  • The product must be used in accordance with the instructions contained in this instruction guide.
  • It must be used only for domestic purposes.
• It does not cover wear and tear, damage, misuse or consumable parts.
  • Swan Products Ltd has limited liability for incidental or consequential loss or damage.
  • This guarantee is valid in the UK and Eire Only.
  • This warranty does not affect your statutory rights

Check the label underneath your product and write the model number here for reference

2 Swan

CLEANING & MAINTENANCE

Love Your SwanProduct

Always site your bin on a level surface that can withstand the weight of the bin and its contents

Try not to site your bin in direct sunlight or any places where it might get hot/warm as this could lead to unpleasant odours. Avoid placing the bin in a contained space and ensure that any obstacles don't block the inductive window within a 2 metre distance.

Avoid placing your bin where it might pick up splashes from cooking etc

Regularly clean your bin with a non-abrasive cleaner, using a soft cloth. Dry thoroughly after cleaning.

Do not use wet cloth near the sensor panel

Feel free to use scented bin fresheners

Check out our award winning Retro range at

www.swan-brand.co.uk

Scan this QR code to hear about our story

We love what we do

we're proud of our quality

Find us on Facebook

Copyright © Swan Products Ltd.

PO Box 3117, Stoke-on-Trent ST4 9GD