CS810NN - Styler Conair - Free user manual and instructions

Product Type	Hair Styler
Brand	Conair
Model	CS810NN
Dimensions (approx.)	25.4 cm x 5.1 cm x 3.8 cm (10 in x 2 in x 1.5 in)
Weight (approx.)	227 g (0.5 lbs)
Power Supply	120 V AC, 60 Hz
Power Consumption	30 W
Plate/Barrel Material	Ceramic coated
Temperature Settings	Adjustable, up to 200°C (392°F)
Heat-up Time	Approximately 30 seconds
Auto Shut-off	Yes, after 60 minutes of inactivity
Swivel Cord	Yes, 1.8 m (6 ft) with tangle-free design
Usage	For styling and straightening hair
Cleaning	Wipe with a damp cloth after unplugging and cooling
Safety Features	Dual voltage for international travel (may require adapter), heat-resistant stand
Warranty	Limited 2-year warranty

Frequently Asked Questions - CS810NN Conair

How do I clean my Conair CS810NN styler?

Unplug the styler and let it cool completely. Wipe the plates with a soft damp cloth. Do not use abrasive cleaners or immerse in water.

Can I use the CS810NN with a voltage converter overseas?

The styler is dual voltage (120-240V) but may require a plug adapter. Check the rating label and use a suitable converter if needed.

What temperature should I use for fine hair?

Start with a low temperature setting, around 150°C (300°F), and increase gradually if needed to avoid damage.

How long does it take to heat up?

The CS810NN heats up in about 30 seconds, indicated by a ready light.

Does it have an automatic shut-off feature?

Yes, it automatically turns off after 60 minutes of inactivity for safety.

Can I use the styler on wet hair?

No, the styler is designed for dry hair only. Using on wet hair can cause damage and risk electric shock.

How do I store the styler?

Allow it to cool completely, then wrap the cord loosely around the device and store in a dry place away from moisture.

What is the warranty period for Conair CS810NN?

It comes with a limited 2-year warranty from the date of purchase. Keep your receipt.

Are replacement plates available?

Replacement parts are not typically offered. If damaged, contact Conair customer service for repair options.

Why does my styler not heat up?

Ensure it is plugged in properly and the power button is on. If still not heating, check the fuse or contact support.

USER MANUAL CS810NN Conair

Hair should be clean and completely dry before using the flat iron. For best results, use a light styling product before blow-drying hair.

1. Start with a hair section that is 112 inches wide and no more than 12 inch thick.

2. Open the iron and place the hair section between the two hot plates, close to the scalp. Trap hair between the plates by firmly squeezing the handles together.

3. While maintaining the tension, slowly pull the unit down along the hair section toward the ends. At the ends, release the pressure on the handle and allow the hair to slide out.

4. Repeat the process on additional sections of hair until you achieve the hairstyle you desire. It may be necessary to repeat the process on certain areas, depending on the texture of your hair.

Some experience is necessary when learning to use this flat iron. After using the iron several times, you will learn the ideal way to straighten and style your hair.

USER

MAINTENANCE

Your flat iron is virtually maintenance free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, allow it to cool and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only. No repairs should be attempted by the consumer.

CAUTION

NEVER allow the power supply cord to be pulled, twisted, or severely bent. Never wrap the cord tightly around the appliance. Damage will occur at the high flex point of entry into the appliance, causing it to rupture and short circuit. Inspect the cord frequently for damage. Stop use immediately if damage is visible or if unit stops or operates intermittently.

STORAGE

When not in use, your iron is easy to store. Allow appliance to cool, then simply store out of reach of children in a safe, dry location. Do not jerk or strain cord at plug connections. Do not wrap the line cord around the appliance. Allow the cord to hang or lie loose and straight at the point of entry into the appliance.

WARNING:

IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU'RE WRONG.

KEEP AWAY FROM WATER

Everyone knows that electricity and water are a dangerous combination. But did you know that an electric appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.

ALWAYS UNPLUG SMALL APPLIANCES

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following:

READ ALL INSTRUCTIONS BEFORE USING KEEP AWAY FROM WATER

DANGER

DANGER—Any appliance is electrically live even when the switch is off. To reduce the risk of death by electric shock:

1. Always unplug appliance immediately after using.

2. Do not use while bathing or in the shower.

3. Do not place or store appliance where it can fall or be pulled into a tub or pink.

4. Do not place in, or drop into water or other liquids.

5. If an appliance falls into water, unplug it immediately. Do not reach into the water.

WARNING

WARNING TO reduce the risk of burns, electrocution, fire, or injury to persons:

1. This appliance should never be left unattended when plugged in.

2. Do not pull, twist, or wrap line cord around appliance.

3. This appliance should not be used by, on or near children or individuals with certain disabilities.

4. Use this appliance only for its intended use, as described in this manual. Do not use attachments not recommended by the manufacturer.

5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been dropped or damaged, or dropped into water. Return the appliance to an authorized service center.

appliance to an authorized service center for examination and repair.
6. Keep the cord away from heated surfaces.
7. Never use while sleeping.
8. Never drop or insert any object into any opening.

1. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.

2. Unit is hot when in use. Do not let heated surfaces touch eyes or skin.

3. Do not place the heated unit directly on any surface while it is hot or plugged in.

4. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of hair, lint and other debris.

5. Do not use an extension cord with this appliance.

6. Do not touch hot surfaces of the appliance. Use handles or knobs.

7. Do not attempt to touch the housing of your appliance near the straightening plates, as it is hot when in use.

8. Do not use with a voltage converter.

9. This appliance is not a toy. Keep away from children.

SAVE THESE NSTRUCTIONS

OPERATING INSTRUCTIONS

This flat iron is intended for household use. Use on Alternating Current (60 hertz) only. This unit is designed to be operated at 120 volts AC.

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

NOTE: Do not use this styling appliance on hair extensions.

LIMITED FIVE-YEAR WARRANTY (U.S. AND CANADA ONLY)

Conair will repair or replace (at our option) your unit free of charge for 60 months from the date of purchase if the appliance is defective in workmanship or motariels.

To obtain service under this warranty, return the defective product to the service center listed on back, together with your purchase receipt and \$7.50 for postage and handling. California residents need only provide proof of purchase and should call 1-800-3-CONAIR for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 60 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 60-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY

EXPRESSION OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you.

This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.

INSTANT HEAT TECHNOLOGY

The iron's unique 30 high temperature settings and Instant Heat technology provide styling versatility for all hair types. If you have fine hair, a low temperature will provide the best results. If you have thick, wavy or hard-to-straighten hair, keep the heat setting on high. You can vary the iron's temperature according to your particular need by selecting the desired temperature setting.

Temperature Setting Guide

Temp. Control Hair Type
Low 1-8(338°F - 356°F)	Fragile/Fine, Hair
Medium 9-14(357°F - 374°F)	Thin Hair
Med/High 15-20(375°F - 392°F)	Medium/Normal Hair
High 21-25(393°F - 419°F)	Wavy/Curly Hair
Maximum 26-30(420°F - 455°F)	Coarse/Thick Hair

USING INSTANT HEAT, THE 30 ULTRA-

HIGH HEAT TEMPERATURE SETTINGS & UNIFORM HEAT RECOVERY SYSTEM

This styling iron features a powerful ceramic heater that maintains high temperatures during use for precision styling. It heats up quickly to the temperature you've selected for your hair type.

Conair's professional salon standards of engineering provide you with a uniform and improved heat recovery system that maintains the iron at constant temperatures. There is a constant surge of power to ensure that heat is continuously and quickly delivered for optimal styling results, unlike other units, which lose heat during use. This provides consistent styling power so that every strand of your hair is set with the same level of heat and comes out the same way for a perfect finish.

Styling has never been easier with the new rose gold ceramic-coated flat iron! Get ready to experience salon results without the salon!

STYLING WITH THE NEW

EASY-GLIDE, FLOATING GOLD CERAMIC-COATED PLATE

Your new straightening iron has a plate

designed with a little give, to "float." This provides better contact with hair, eliminating gaps, for straighter results. The easy-glide

rose gold ceramic-coated surface is one of the latest – and best – technological advances in hair appliances. The ceramic, even-heat distribution produces the ultimate in silky, shiny, healthy-looking hair. You'll find that hair glides easily over the surface of the plates as you're straightening, and that it is easier to clean styling product residue, etc., off the plates after each use. The ceramic surface also helps smooth down flyaways and frizzies. As you smooth your hair, heat is evenly distributed so that the style you create has a salon-perfect, silky smooth, shiny finish. Hair also glides right through the plates after it's straightened.

A bonus One 'n Only® Argan Oil, Oil Treatment is included. Argan oil protects, revitalizes and nourishes hair.

This non-greasy, alcohol-free formula is instantly absorbed, creating brilliant shine and conditioned, silky hair.

One 'n Only® Argan Oil can be purchased online at www.stylesource.com.

One 'n Only®

Argan Oil, Oil Treatment

Ingredients/Ingredientes (INCI): Dimethicone, Cyclopentasiloxane, Dimethiconol, C12-15 Alkyl Benzoate, Fragrance (Parfum), Argania Spinosa Kernel Oil, Yellow 11 (CI 47000), Red 17 (CI 26100).

BEAUTY TIPS:

To achieve the looks you love and for more great InfinitiPRO by Conair® products, visit infiniti.conair.com

Service Center

Conair Corporation Service Department

7475 N. Glen Harbor Blvd

Glendale, AZ 85307

Please register this product at www.conair.com/registration

For information on any Conair or InfinitiPRO by Conair product, call 1-800-3-CONAIR or visit us on the web at www.conair.com/infiniti

©2017 Conair Corporation 150 Milford Road, East Windsor, NJ 08520 7475 N. Glen Harbor Blvd., Glendale, AZ 85307

17PA031800

GETTING STARTED

Plug the iron into an electrical outlet. Turn on unit. Select desired temperature setting; the indicator light will blink for each temperature setting until selected temperature is reached. Indicator light will then become steady.

To turn off, press ON/OFF button (lights will go off). Never leave your flat iron on and unattended. However, should you fail to turn the unit off, it will shut itself off automatically within 60 minutes.

WARNING: The flat iron's rose gold ceramic-coated plates will get very hot within a few seconds and should not come into contact with the skin after the flat iron has been turned on.

INFINITIPRO

ROSE GOLD CERAMIC FLAT IRON

GET TO KNOW YOUR FLAT IRON

*Actual plate size may vary. **When compared to other Conair straighteners.

Conair Corporation Service Department

7475 N. Glen Harbor Blvd

Glendale, AZ 85307

www.conair.com/registration

©2017 Canadian Corporation

©2017 Conair Corporation 150 Milford Road, East Win

7475 N. Glen Harbor Blvd., Glendale, AZ 8530

[Non-Text]

17PA031800

INFINITIPRO