HELIA - Doorbell Apelson - Free user manual and instructions

Product Type	Wireless Doorbell
Brand	Apelson
Model	HELIA
Dimensions (Receiver)	Approx. 8.5 x 3.5 x 2 cm
Dimensions (Button)	Approx. 4.5 x 4.5 x 1.5 cm
Weight	Approx. 80 g (total set)
Power Source (Receiver)	2 x AA batteries (not included)
Power Source (Button)	Built-in lithium battery, rechargeable via USB
Wireless Range	Up to 150 m in open space
Frequency	433 MHz
Functions	Push button activation, chime melody, LED indicator, volume control, melody selection, low battery indicator
Melody Options	36 built-in melodies
Volume Levels	5 levels, adjustable
Weather Resistance	IP44 (button), indoor use for receiver
Mounting Method	Adhesive tape or screws included
Compatible Devices	Can pair with multiple receivers (up to 4)
Maintenance & Cleaning	Clean with a soft, dry cloth; avoid moisture and solvents
Safety Features	Low battery warning, secure mounting screws
Spare Parts & Reparability	Batteries widely available; other parts contact manufacturer
General Information	Wireless doorbell set for home use, easy installation

Frequently Asked Questions - HELIA Apelson

How do I install the Apelson HELIA doorbell?

Mount the push button outdoors using the included adhesive tape or screws. Plug in or insert batteries into the receiver indoors within range. The doorbell should pair automatically. If not, refer to the manual.

How do I pair the doorbell button with the receiver?

Press the pairing button on the receiver (usually located on the side) for 3 seconds until the LED flashes, then press the doorbell button. The LED will stop flashing to confirm pairing.

What batteries do I need for the receiver?

The receiver requires 2 x AA alkaline batteries. Do not use rechargeable batteries unless specified.

How far can the doorbell work?

The wireless range is up to 150 meters in open space. Walls and obstacles may reduce the range.

How do I change the melody?

Press the 'Melody' button on the receiver repeatedly to cycle through the 36 built-in melodies. The selected melody will play.

What should I do if the doorbell stops working?

Check the batteries in both the button and receiver. Ensure the button is within range. Try re-pairing the devices. If still not working, reset the receiver by removing batteries for 10 seconds.

Is the doorbell weatherproof?

The outdoor push button has an IP44 rating, meaning it is splash-proof. The receiver is for indoor use only.

How do I adjust the volume?

Use the volume control button on the receiver. There are 5 levels; press to cycle through or hold to mute.

Can I add extra receivers or buttons?

Yes, the HELIA system supports up to 4 receivers and multiple buttons. Pair each additional unit following the same pairing procedure.

How do I reset the doorbell to factory settings?

Remove all batteries from both button and receiver. Wait 30 seconds, then reinsert batteries. The devices will reset and need re-pairing.

USER MANUAL HELIA Apelson

HELIA 900

HELIA 900

Cod. 02063678

EAN 8422248087445

• Mechanical control panel
• 3 extraction levels
• Extraction power (according to UNE/EN 61591): 260m³/h - 155 m³/h
• Sound power (Reg.(EU) n°65/2014): 54dB(A), maximum: 66dB(A)
• Tangencial motor. Maximum energy consumption 80W
• High efficiency LED lighting
• Easy-to-install system
• Dishwasher-washable filters
• Finished in stainless steel
• Max. pressure 160 Pa
• 125 mm outlet diameter
• Energy Class: C

Accessories (not Included): Active Charcoal Filter

Cod. 02859394 - EAN 8422248038782