SSM-BC10 - Uncategorized Auray - Free user manual and instructions
Find the device manual for free SSM-BC10 Auray in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Speaker |
| Model | SSM-BC10 |
| Brand | Auray |
| Dimensions (W x H x D) | 120 mm x 80 mm x 40 mm |
| Weight | 200 g |
| Power Supply | USB 5V / 1A (micro USB) |
| Battery Capacity | 800 mAh |
| Playback Time | Up to 6 hours (at medium volume) |
| Charging Time | Approximately 2 hours |
| Wireless Connectivity | Bluetooth 5.0 (range up to 10 m) |
| Audio Inputs | AUX 3.5 mm, MicroSD card slot |
| Supported Audio Formats | MP3, WAV, FLAC |
| Speaker Driver | 40 mm full range, 3W |
| Frequency Response | 100 Hz - 20 kHz |
| Signal-to-Noise Ratio | ≥ 80 dB |
| Controls | Power, Volume +/-, Play/Pause, Next/Previous, Mode |
| LED Indicator | Charging (red), Bluetooth pairing (flashing blue), Connected (blue) |
| Microphone | Built-in for hands-free calling |
| Housing Material | ABS plastic with fabric grille |
| Color Options | Black, Gray |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 60°C |
| Included Accessories | USB charging cable, AUX cable, User manual |
Frequently Asked Questions - SSM-BC10 Auray
How do I pair the SSM-BC10 with my phone?
Turn on the speaker by pressing the power button. The LED will flash blue, indicating pairing mode. On your phone, enable Bluetooth and search for 'SSM-BC10'. Tap to connect. Once paired, the LED will stay solid blue.
Can I use the speaker while it's charging?
Yes, you can use the speaker during charging. However, to achieve the best battery performance, it's recommended to charge the battery fully before first use.
How long does the battery last on a full charge?
The built-in 800 mAh battery provides up to 6 hours of playback time at medium volume. Actual battery life may vary depending on volume level and audio content.
How do I reset the speaker if it stops responding?
If the speaker becomes unresponsive, press and hold the power button for 10 seconds until the device turns off. Then turn it back on normally. This should perform a soft reset.
What audio sources are supported?
The SSM-BC10 supports wireless audio via Bluetooth 5.0, as well as wired input through the 3.5 mm AUX port and local playback from a MicroSD card (up to 32 GB, FAT32 format).
Can I use the speaker for hands-free calls?
Yes, the speaker has a built-in microphone. When connected via Bluetooth, you can answer incoming calls by pressing the Play/Pause button. The microphone picks up your voice for clear hands-free conversations.
How do I switch between Bluetooth, AUX, and MicroSD modes?
Press the Mode button repeatedly to cycle through the available modes: Bluetooth, AUX, and MicroSD. The LED indicator will change color or flash pattern to indicate the active mode.
What should I do if the sound is distorted?
Distortion may occur if the volume is set too high on both the speaker and the source device. Reduce the volume on the source device and adjust from the speaker. Also, ensure the speaker is not placed in a confined space that blocks the sound.
How do I clean and maintain the speaker?
Use a soft, dry cloth to wipe the exterior. Do not use water, solvents, or abrasive cleaners. Avoid exposing the speaker to extreme temperatures, humidity, or direct sunlight for extended periods.
Does the speaker come with a warranty?
The Auray SSM-BC10 typically includes a 1-year limited warranty against manufacturer defects. For specific warranty terms, please refer to the user manual or contact Auray customer support.
User questions about SSM-BC10 Auray
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SSM-BC10 - Auray and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SSM-BC10 by Auray.