Solo - Lighting QAZQA - Free user manual and instructions

Product Type	Ceiling Light / Pendant Light
Brand	QAZQA
Model	Solo
Category	Lighting
Dimensions	Diameter 30 cm, Height 15 cm
Weight	0.5 kg
Power Source	AC 220-240V, 50/60Hz
Light Source	Integrated LED (non-replaceable)
Wattage	12W
Lumen Output	800 lm
Color Temperature	3000K (Warm White)
Dimmable	Yes (with compatible dimmer)
Material	Aluminum frame, Polycarbonate diffuser
Color	White, Black (or as available)
Installation	Ceiling mounted, hardwired
Protection Class	IP20 (indoor use only)
Certifications	CE, RoHS
Maintenance	Clean with a dry cloth; do not use abrasive cleaners
Spare Parts	LED module not replaceable; whole fixture replacement
Warranty	2 years
User Manual	Available for free download in PDF

Frequently Asked Questions - Solo QAZQA

How do I install the QAZQA Solo light fixture?

Installation should be carried out by a qualified electrician. Ensure the power is turned off. Mount the bracket to the ceiling, connect wires (L, N, Earth), and attach the fixture.

Can I replace the LED bulb in the Solo fixture?

No, the LED module is integrated and non-replaceable. If the light fails, the entire fixture must be replaced.

Is the Solo light dimmable?

Yes, it is dimmable when used with a compatible leading-edge or trailing-edge dimmer.

What is the color temperature of the Solo?

The color temperature is 3000K, which produces a warm white light, similar to traditional incandescent bulbs.

What are the dimensions of the Solo?

The Solo measures approximately 30 cm in diameter and 15 cm in height.

How do I clean the Solo light fixture?

Use a soft, dry cloth to wipe the surface. Do not use water, solvents, or abrasive cleaners as they may damage the finish.

What is the warranty period for QAZQA Solo?

QAZQA offers a 2-year warranty from the date of purchase covering manufacturing defects.

Can the Solo be used outdoors?

No, the Solo has an IP20 rating, making it suitable only for indoor use in dry locations.

What tools are needed for installation?

A screwdriver, wire stripper, and voltage tester are typically required. For hardwiring, basic electrical tools are needed.

Where can I download the user manual?

The manual is freely available in PDF format on the notice-facile.com website. Look for the QAZQA Solo model.

USER MANUAL Solo QAZQA

Please study the instruction manual and below information carefully before installing or using this product. Please keep this user manual for further reference

1. The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.

2. Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.

3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box; before any installation, maintenance or repair work is undertaken.

4. Exterior lighting must not be installed during rain.

5. Take account of the minimal separation distance from other objects and the room required around the fitting.

6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.

7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.

8. When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.

9. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components

10. Take account of all available technical information.

11. Take note of the symbols when connecting wires:

N=Neutral L=Live Earth

1. Meaning of symbols:

For indoor use only, where direct contact with water is impossible

IPXX This icon indicates the level of water-proof and dust-proof

Protection Class I: the fitting must be earthed

□ Protection Class II: the fitting is doubled insulated and does not require earthing

Protection Class III: the fitting is low voltage

Minimum distance from lighted objects (meters)

Only the self-shielded halogen lamp should be used with the luminaire

Strip the wire to the indicated length (mm); different items require different length

Connect using the specified cable; different items require different cables

The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons. The armature is designed to work only with the indicated voltage. Different items require different working voltage.

The luminaire can be used in combination with a dimmer

The reference light angle and light space of the luminaire

This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste

QAZQA

WWW.QAZQA.COM

INSTRUCTION MANUAL

Solo P45 93927/93928/99496

QAZQA

WWW.QAZQA.COM