P. Leclercq - Wristwatch ICE Watch - Free user manual and instructions

Product Type	Analog Quartz Watch
Brand	ICE Watch
Model	P. Leclercq
Case Diameter	Approx. 40 mm
Case Thickness	Approx. 10 mm
Weight	Approx. 45 g
Battery Type	SR626SW (or equivalent)
Water Resistance	3 ATM (30 meters)
Movement	Japanese Quartz
Crystal	Mineral Glass
Case Material	Plastic
Strap Material	Silicone
Strap Width	Approx. 20 mm
Clasp Type	Buckle
Display	Analog with hour, minute, and second hands
Date Function	Date window at 3 o'clock
Care Instructions	Wipe with a soft cloth; avoid contact with chemicals
Safety Note	Not suitable for diving or high-pressure water activities
Service Life	Battery lasts approximately 2 years
Spare Parts Availability	Battery and strap available from authorized dealers

Frequently Asked Questions - P. Leclercq ICE Watch

How do I set the time on my ICE Watch P. Leclercq?

Pull the crown out to the first position (or second, depending on model). Rotate the crown to set the time. Push the crown back in to secure.

Is the watch water resistant? Can I swim with it?

The watch has a water resistance of 3 ATM (30 meters). It is splash-proof and can withstand rain, but not recommended for swimming or diving.

How do I change the battery?

Remove the back cover (usually a snap-off or screw-off). Replace with a new SR626SW or equivalent battery. Ensure the seal is properly seated for water resistance.

What is the strap size? Can I replace the strap?

The strap width is 20 mm. You can replace it with any standard 20 mm strap. Use a spring bar tool to remove and attach.

How do I adjust the date?

Pull the crown to the first position (if applicable) and rotate clockwise to set the date. If the watch has a quick-set date, the crown may need to be pulled halfway.

What kind of battery does the watch use?

It uses a SR626SW silver oxide battery (also known as 377 or AG4).

Why is the watch not working?

Check if the battery is dead. Replace it. If still not working, the movement may be damaged; contact customer support.

Can I wear this watch while exercising?

Yes, the silicone strap is comfortable and the watch is splash-proof. However, avoid excessive sweat buildup; clean regularly.

How do I clean the watch?

Wipe with a soft, slightly damp cloth. Avoid using soaps or solvents. Dry thoroughly.

Where can I find the instruction manual?

The manual is available for free download on notice-facile.com in PDF format.

USER MANUAL P. Leclercq ICE Watch

Remove the plastic stopper (in the direction of the arrow).

Simple line drawing of a hand holding a pen or stylus, with an arrow indicating direction (no text or symbols)

Hand pointing at a circular device with an arrow indicating motion (no text or symbols)

Press the winder.

Instructions

Ice-Watch must be serviced regularly in order for it to work correctly. The length of time between services will vary depending on the model, climate and the care you take of your watch. As a general rule, we recommend the following steps so that you can keep your watch in tip-top condition for as long as possible.

• Temperature: avoid temperatures below 0^ C ( 30^ F) or above 35^ C ( 100^ F).
• Avoid prolonged exposure to sun, steam, contact with alcohol, detergents, perfume or cosmetic products to prevent distorsion, discoloration or any damaging reaction.
• Do not use any watch or chronograph buttons while under water to prevent water from entering the mechanism.
• Use within 10 ATM water resistant standard.

The information contained in this document belongs to ICE Universal Ltd and may not be reproduced without its authorisation.

A) SETTING THE DATE

1. Gently pull the winder out to the 1st position.
2. Turn the winder anticlockwise to set the date. If the date is set between around 9pm and 1am, it is possible that it will not change the next day.
3. Return the winder to its normal position.

B) SETTING THE TIME

1. Gently pull the winder out to the 2nd position.
2. Turn the winder to set the hour and minute hands to the correct positions.
3. The second hand starts again when the winder is pushed back into its normal position.

C) USING THE CHRONOGRAPH

1. Press button A to start and stop the chronograph (stop watch).
2. Press button B to re-set the chronograph.
3. Gently pull the winder out to the 2nd position.
4. Press button A to set the chronograph second hand to the desired start position. Hold down button A if you want to move the chronograph hand forward quickly.
5. Return the winder to its normal position. You should also use this procedure if the chronograph hand does not return to its start position after you press button B, as well as when you replace the battery.

D) CHOOSING THE CHRONOGRAPH'S START POSITION