LB03501/07 - Wristwatch Rotary - Free user manual and instructions

Product Type	Watch
Brand	Rotary
Model	LB03501/07
Movement Type	Quartz
Case Material	Stainless Steel
Case Diameter	40 mm
Case Thickness	10 mm
Band Material	Leather or Stainless Steel
Band Width	20 mm
Weight	80 g
Water Resistance	50 meters
Power Source	Battery (SR626SW or equivalent)
Functions	Time, Date, Luminous Hands
Glass Type	Mineral Crystal
Clasp Type	Buckle or Deployment Clasp
Care Instructions	Clean with a soft dry cloth. Avoid contact with chemicals.
Safety Recommendations	Keep away from strong magnetic fields. Do not operate crown when wet.
Repairability	Battery replacement recommended by professional only.

Frequently Asked Questions - LB03501/07 Rotary

How do I set the time on my Rotary watch?

Pull the crown out to position 2 (second click) and rotate it clockwise or counterclockwise to set the desired time. Push the crown back in to position 0.

How do I change the date on my Rotary watch?

Pull the crown out to position 1 (first click) and rotate it clockwise to advance the date. Avoid setting the date between 9 PM and 3 AM to prevent damage.

Is my Rotary watch water resistant?

Yes, it is water resistant up to 50 meters. Suitable for swimming and showering, but not for diving.

How do I replace the battery?

We recommend taking your watch to a professional jeweler or watchmaker for battery replacement to maintain water resistance and prevent damage.

What type of battery does the LB03501/07 use?

It uses a standard SR626SW battery or equivalent.

How often should I service my Rotary watch?

For quartz watches, battery change every 1-2 years and a general service every 3-5 years is recommended.

Can I wear my watch while playing sports?

Yes, the 50m water resistance allows for swimming and light sports, but avoid impacts and extreme conditions.

How do I clean my watch?

Use a soft, lint-free cloth to gently wipe the case and band. For metal bands, you can use a mild soap and water solution.

What should I do if my watch stops running?

First, check if the crown is fully pushed in. If not, push it in. If it still doesn't run, the battery may need replacement or there might be an internal issue. Consult a professional.

Is the manual available in other languages?

The manual on our website is in English. You can request a translation by providing your email and desired language on the manual page, and we will send it to you.

USER MANUAL LB03501/07 Rotary

For more information, or to view the Rotary watches collections please visit www.rotarywatches.com [e-mail]

Rotary Watches is the oldest Swiss watch brand that is still owned and run by a direct descendant of the founder. Originally established in Switzerland in 1895 by Moise Dreyfuss, Rotary Watches is dedicated to designing and manufacturing high quality, affordable and stylish timepieces. By choosing a Rotary timepiece, you are investing in a timepiece that will offer you a lifetime of reliability and a wealth of memories.

Setting the Date and Time

Check if the case back of the watch is marked 'Waterproof', 'Dolphin Standard' or if the dial states 'Les Originales'. If so, please follow instructions in section A. If not, please follow instructions in section B.

N.B * Pulling the crown forcefully in an outward direction could result in serious damage to the watch. Make sure that you always unscrew the crown before adjusting the date or time.

** Not all Dolphin standard models have a screw down crown and some are fitted with a double seal crown which functions as per details on Page 6.

To change the time and/or date of Dolphin Standard/Waterproof or Les Originales models:

Always make sure that the buttons on your watch are screwed down before exposing to water. A hard knock might cause a watch to lose its waterproof benefit without you realising it. The caseback of waterproof watches must be opened and closed by a skilled watchmaker. When due a battery change, we recommend you return your Waterproof/Dolphin Standard watch to Rotary for resealing.

Continued on page 4

Dolphin Standard / Waterproof or Les Originales models: (Continued from page 3)

Unscrew the crown to release it from the case in a downward/anti clockwise direction (1).

To set the date: Once the screw is released, pull the crown outward gently until it clicks once (2) and rotate the crown in a clockwise direction to change the date (3). (Only applicable for date watches).

Continued on page 5

Dolphin Standard / Waterproof or Les Originales models: (Continued from page 4)

To set the time: pull the crown once more in an outward direction gently until it clicks (4) and rotate the crown in a clockwise direction to change the time (5).

To close the crown: push the crown inward whilst at the same time rotating the crown in a clockwise direction (6). It is very important to check that the crown is fully screwed into a closed position in order to ensure waterproof benefit is maintained.

Setting the day and date: Pull out the crown one notch (1), rotate clockwise to change day (2) and anti clockwise to change date (3).

Setting the time: Pull out the crown a second notch (4) and rotate the hands until the correct time is shown (5). Remember to push the crown fully home.

3

Bracelet Watches

Direct contact with sprays such as hairsprays, perfumes or detergents may cause damage to your watch.

Precious Metal Watches

All precious metal products should be cared for with a polishing cloth and stored in the presentation box when not being worn. Please note that Rotary precious metal watches are not waterproof.

4

5

6

7

'Conflict' or 'blood' diamonds

The diamonds used in Rotary watches have been purchased from legitimate sources and are 'conflict free'

'No Dirty Gold Campaign'

We confirm our understanding and our compliance to the 'No Dirty Gold Campaign'.

8

Mechanical Watches (Continued from page 11)

1) For date setting, pull the crown to position (A) and turn it in an anti-clockwise direction to set the calendar.

2) For time setting, pull the crown to position (B) and turn it forward to set the correct time. Then push the crown back to its original position or it will not keep correct time.

12

Leather Straps

Leather straps deteriorate at different rates depending on climatic conditions, sweat acidity and levels of wear and tear. To ensure your leather strap lasts as long as possible take the following precautions:

1) avoid prolonged exposure to sunlight
2) avoid direct contact with solvents, detergents and perfumes.

9

Quartz Watches

All quartz watches are powered by batteries so it is not necessary to wind them. If your quartz watch stops, have the battery checked as soon as possible. A "dead" battery may cause serious damage to the movement if left inside the watch for too long. Quartz analogue watches contain both electronic and mechanical parts which require periodic servicing.

13

Automatic Watches

The self-winding device for automatic watches keeps the watch wound while it is being worn. Off the wrist, it will keep going for between 24 to 48 hours. To restart the watch after this time, change the time manually, (wind 10/15 times) and it will continue to function as it is worn. Alternatively, place in an automatic winding box.

10

Nickel Compliancy

All Rotary watches conform to the EEC directive on Nickel content. They comply with the procedural tests EN1810, EN1811 and EN12472 that form part of the directive, to ensure the release rate is no greater than 0.5ug/cm2/week on products in direct and prolonged contact with the skin.

14

Mechanical Watches

Your mechanical watch will never need a battery! Its special design supports both automatic and mechanical functions. For proper time keeping, turn the crown clockwise at its original position until it feels tight. But you don't need to wind the watch daily, the rotor will wind the mainspring every time you move! The watch could run 35-40hrs once fully wound and the residual fuctioning hours will be displayed by the indicator.

Note: to keep the optimum function of the watch it is recommended to stop winding when the indicator points to "35".

(Continued on page 12)

11

Lifetime Guarantee

All Rotary watches should be serviced at 3 year intervals at a Rotary Service Centre to ensure the Lifetime Guarantee remains valid.

Service centre details

Rotary Watches Limited

277 Prince Avenue

Westcliff on Sea

Essex

SSO OJS

01702 337 061

15