PCH-2000M - Heating Philco - Free user manual and instructions

Product Type	Fan Heater
Model	PCH-2000M
Brand	Philco
Power Supply	220-240 V ~ 50 Hz
Power Consumption	2000 W
Heating Element	PTC Ceramic
Adjustable Thermostat	Yes
Modes	Fan Only, Low Heat (1000 W), High Heat (2000 W)
Safety Features	Overheat Protection, Tip-Over Switch
Dimensions (W x H x D)	25 x 30 x 15 cm
Weight	2.5 kg
Noise Level	< 45 dB
Suitable Room Size	Up to 20 m²
Control Type	Manual Dial
Oscillation	No
Cable Length	1.5 m
Color	White / Black
Filter	Washable Dust Filter
Maintenance	Clean with Dry Cloth
Warranty	2 Years

Frequently Asked Questions - PCH-2000M Philco

How do I clean the Philco PCH-2000M heater?

Unplug the heater and let it cool completely. Use a soft, dry cloth to wipe the exterior. The dust filter can be removed and washed with water; let it dry fully before reinserting. Avoid using abrasive cleaners or immersing the unit in water.

What safety features does the PCH-2000M have?

The heater includes overheat protection and a tip-over switch. If the unit overheats or is knocked over, it will automatically shut off to prevent accidents.

Does the heater have an auto shut-off timer?

No, the PCH-2000M does not include a programmable timer. It uses manual controls for power and thermostat settings.

How can I save energy while using this heater?

Use the Low Heat (1000W) mode for smaller rooms or when you need less warmth. Set the thermostat to a comfortable level and avoid overheating empty rooms. Turning off the heater when not needed also helps.

What room size is the PCH-2000M suitable for?

It is designed for rooms up to 20 square meters. For larger spaces, consider multiple units or a higher-capacity heater.

Is the heater noisy?

The noise level is < 45 dB, which is comparable to a quiet conversation. It is suitable for use in bedrooms or offices without causing disturbance.

Does it come with a remote control?

No, the PCH-2000M is controlled manually via a dial on the unit. There is no remote control included.

How do I set the thermostat?

Turn the thermostat dial clockwise to increase the desired temperature. The heater will automatically cycle on and off to maintain that temperature. A frost protection setting (usually indicated by a snowflake icon) is available to prevent freezing.

What happens if the heater overheats?

The overheat protection feature will automatically shut off the heater. If this occurs, unplug the unit, let it cool down, and check for obstructions or blocked air intakes. After cooling, it can be restarted.

What is the warranty period for the PCH-2000M?

Philco offers a 2-year warranty for this model. Keep your purchase receipt for service claims.

USER MANUAL PCH-2000M Philco

2/F, Shing Dao Industrial Building.

232 Aberdeen Main Road, Hong Kong

Service Hotline : [phone]

客戶服雜總線 8210 8210 Customer Service Holdings

www.gilman.hk

PHILCO®

CERAMIC TOWER HEATER

Line drawing of a single-hand electrical heater with heat sinks and cooling fins (no text or symbols)

Model: PCH-2000M

Owner's Manual

Please read these instructions carefully before installing and operating the

Ceramic Tower Heater.

CERAMIC TOWER HEATER MODEL: PCH-2000M

IMPORTANT INSTRUCTION

• Read all instructions before using this heater.
  ■ Ensure that the voltage on the rating plate is the same as in your home.
  This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 0.9M from the front of the heater and keep them away from the sides and rear.
  ■ Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
  ■ Always unplug heater when not in use. Never pull or yank on the cord or the appliance. To disconnect heater, turn control to OFF, grasp plug and remove it from outlet.
  ■ Do not use the unit in enclosed spaces such as inside cabinets or walls in order to defrost pipes or prevent pipes from freezing.
  ■ Do not plug heater into loose-fitting or worn out electrical outlets.
  ■ Do not wash with water, or touch with wet hands.
  ■ Do not cover with clothing or place alongside inflammable objects such as cushions, newspapers or curtains .....etc.
  ■ The sides are hot during operation, do not touch the heater while it is running.
  ■ Never wrap the cord tightly around the appliance, as this could place undue stress on the cord where it enters the appliance and cause it to fray and break.
  Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Return heater to authorized service facility for examination, electrical mechanical adjustment, or repair to avoid a hazard.
• Do not use outdoors.
• This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container. If the heater does become wet, unplug it from the wall receptacle before touching it, as a wet

heater may create an electrical shock hazard even if the heater is turned off.

■ The heater must not be located immediately below a socket-outlet.

■ Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or the like. Arrange cord away from trafficked area and where it will not be tripped over or stepped on.

■ To disconnect heater, turn controls to off, then remove plug from outlet.

■ Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.

■ To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, carpets, where openings may become blocked.

A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.

Do not use this heater as an integral part of any life support or equipment protection system, where a functional failure or misapplication of the heater could jeopardize the people or things being protected.

- Avoid using heater while sleeping. - To prevent electrical overload and blown fuses, be sure that no other appliances are plugged into the same outlet.

■ Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.

■ Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire.

■ WARNING IN ORDER TO AVOID OVERHEATING, DO NOT COVER THE HEATER.

The heater carries the Warning word indicating that it must not be covered.

SAVE THESE INSTRUCTION

防霜功能：

防止機身結霜

■ Frost Watch: When the heater is plugged in and the Power Indicator is on, you can select any setting for room size and leave the Thermostat Control on the FROST WATCH or lowest setting. Your unit will remain Off unless the temperature drops below (4°C). If this happens, Frost Watch will automatically cycle the heater/fan On.

Care And Cleaning

■ Always turn the unit Off, unplug disconnect the cord from the outlet, and allow the heater to cool completely before cleaning. To clean the exterior, use a soft dry cloth or one moistened with a mild detergent to wipe the outside surfaces. Do not use abrasive or harsh cleaners. Dry surfaces thoroughly before using the heater. Or, use a vacuum with a dusting brush attachment to clean away dust.

CAUTION: DO NOT immerse the heater in water or allow water to drip into the interior of the heater, as this could create an electric shock hazard.

■ Store the heater in a dry area. Gather the power cord in loops and secure it with a twist tie. Don't let the power cord come in contact with sharp edges or get compressed by heavy objects. Portable electric heaters are designed for space heating as a supplementary heat source. They are not intended be the main source of heat.

直立式陶瓷暖風機

型號：PCH-2000M

使用説明書

操作方法

1. Power Indicator Light
2. Thermostat Control Knob
3. Room Select Knob
4. Swing Button
5. Swing Button
6. Front Grille
7. Oscillation Base
8. Tip Over Switch (under unit)
9. Stable Feet

Operation

This heater is intended for use on a flat, stable surface, such as a floor, tabletop, shelf, or desk in a location where the airflow grille openings won't be obstructed. Keep all combustible material such as furniture, pillows, paper, clothes and curtains at least 3 feet (0.9m) away from the heater. Do not use in wet or moist locations, like bathrooms or laundry areas, or in areas where paint or other flammable or volatile liquids are used or stored.

CAUTION: Be sure no other appliances are plugged into the same circuit with this heater/fan. A circuit overload could occur.

■ Be sure the Switch Knob is in the OFF position before plugging the unit in. Plug in to an AC outlet. Move the Room Select knob to the appropriate setting for a Low or High. The POWER indicator will light up.
■ Move the Thermostat Control to HOT to activate the unit. Once the desired room temperature is achieved, turn the Thermostat Control towards FROST WATCH until the fan cycles off. The heat will now cycle On/Off to maintain a comfortable level.
■ To use as a fan without heat, move the knob to FAN ONLY and the Thermostat Control toward Hot until the fan begins to operate. No heating will occur in this mode.
■ The oscillation feature functions in any power or mode setting.
■ Press the oscillation button to toggle this feature on and off.
■ The room select knob must be switch on to activate the heater

SPECIAL FEATURES

This unit is equipped with a Safety Auto-Off, plus a safety Thermal Fuse. If the unit experiences excessive heat, the Safety Auto-Off will shut the unit off. If this happens, move the knob to Off Immediately. Be sure the front and back grilles are not blocked and nothing is restricting airflow. Unplug the unit, let it cool down before plugging it back in to operate. Readjust your temperature or room settings. If the unit fails to operate again, it may mean the heater has internal damage and that the Thermal Fuse has been tripped so the heater can no longer operate.
The Motion Off Detection Feature will cut the power if the unit falls over in any direction or is lift (such as if you move it to another part of the room). The Tip-Over Switch will cut the power if the unit is knocked over forward or backward (for example, if a pet accidentally tips it over). Both are controlled by the Tip Over Switch on the bottom of the unit. Do not attempt to defeat this safety feature.
■ The power indicator shows that the heater is switched on and operating. Note that even though this unit has a Cool-Touch Housing, both the front and back grilles will get hot. Be careful not to touch them.