MX10-201 - Watch Nite - Free user manual and instructions

Brand	Nite
Model	MX10-201
Product Type	Watch
Display Type	Analog-Digital
Case Diameter	45 mm
Case Thickness	12 mm
Weight	80 g
Strap Material	Silicone
Water Resistance	50 meters (5 ATM)
Power Source	CR2032 battery
Battery Life	Approximately 18 months
Main Functions	Time, date, alarm, chronograph, backlight
Care Instructions	Wipe with a damp cloth; avoid solvents
Safety Notes	Not suitable for diving; keep away from magnetic fields
Spare Parts Availability	Battery and strap available from manufacturer
Repairability	Battery replacement by authorized service center

Frequently Asked Questions - MX10-201 Nite

How do I set the time on my Nite MX10-201 watch?

To set the time, pull the crown out to position 2. Turn it clockwise to adjust the time. Push back to position 1 to resume normal operation.

What type of battery does the MX10-201 use and how do I replace it?

The watch uses a CR2032 coin cell battery. Replacement should be done by a professional to maintain water resistance. Typical battery life is about 18 months.

Is the Nite MX10-201 water-resistant?

Yes, it is water-resistant up to 50 meters (5 ATM). It is suitable for swimming but not for diving.

How do I set the alarm on my watch?

Press the 'Mode' button until the alarm icon appears. Use the 'Start/Stop' and 'Lap/Reset' buttons to set the desired alarm time. Press 'Mode' to confirm.

Can I use the chronograph function?

Yes. Press the 'Start/Stop' button to begin timing, press again to stop. Press 'Lap/Reset' to reset the chronograph.

How do I adjust the date?

Pull the crown to position 2. Turn it counterclockwise to adjust the date. Push back to position 1.

What should I do if the backlight stops working?

The backlight is typically activated by pressing the 'Light' button. If it fails, the battery may be low. Replace the battery if needed.

Is the watch suitable for outdoor sports?

Yes, the Nite MX10-201 is designed for active use with a durable silicone strap and water resistance suitable for most outdoor conditions.

How do I clean my watch?

Clean the watch with a soft, damp cloth. Avoid using chemicals, solvents, or abrasive materials. Rinse with fresh water after exposure to salt water.

Where can I find replacement parts or service?

Contact Nite customer service or visit an authorized service center for genuine replacement batteries, straps, and repairs.

USER MANUAL MX10-201 Nite

Technical Specifications
GTLS RATING	T25
CASE MATERIAL	316 stainless steel
CASE FINISH	Black PVD or brushed stainless steel
STRAP TYPE	Polymer or stainless steel bracelet
CRYSTAL	Sapphire with triple anti-reflective coating
MOVEMENT TYPE	Quartz
MOVEMENT	Swiss made Ronda 715
CROWN TYPE	Push
DIAL DIAMETER	32mm
CASE DIAMETER	39mm
CASE DEPTH	10.75mm
LUG WIDTH	18mm
FIXING TYPE	2 x 18mm spring bars(https://www.nitewatches.com/store/gb/screws-pins/pack-of-2-x-18mm-spring-bars/)
WEIGHT	78g Fitted on polymer strap158g Fitted on steel bracelet
WATER RESISTANCE	100m
BATTERY LIFE	4-5 Years

Setting the time and date

Pos. I Position of rest (watch running)

Pos. II Quick-change correction for date

Blocking time for the quick-change day correction is from approx. 9.30 pm and midnight.

• Pull the crown out to position II (watch still running).
• Turn the crown until the current date appears.
• Push the crown back into position I.

Pos. III Setting the time

• Pull the crown out to position III (watch stopped).
• Turn the crown, until the current time is displayed
  (remember the 24-hour cycle).
• Push the crown back into position I.

Strap fitting/options

The MX10 models can be fitted with a polymer strap or a stainless steel bracelet.

With a 18mm lug width and 18mm spring bar fixing, straps are easily interchangeable using a forked spring bar tool.

The MX10 straps exclusively available through nitewatches.com can be found here:

https://www.nitewatches.com/store/gb/straps/mx10

The stainless-steel bracelet can be adjusted in length by adding or removing links and by also using the 3-micro adjustment on the buckle part of the strap.

If you have any questions about the MX10 series then please email us on [e-mail].