WDAP-W750E - Access Point Planet - Free user manual and instructions

Product Type	Wireless Access Point
Model	WDAP-W750E
Brand	Planet
Wireless Standard	IEEE 802.11ac Wave 2
Frequency Bands	2.4 GHz and 5 GHz
Max Data Rate	750 Mbps (2.4 GHz: 300 Mbps, 5 GHz: 433 Mbps)
Interfaces	1x 10/100/1000 Mbps PoE Ethernet port
Power Supply	802.3af/at PoE or 12V DC adapter
Dimensions (W x D x H)	160 mm x 160 mm x 30 mm
Weight	Approx. 300 g
Mounting	Wall or ceiling mountable (bracket included)
Management	Web-based GUI, SNMP, CLI (Telnet/SSH)
Security	WPA2-PSK, WPA3, 802.1X RADIUS client
Key Features	Multiple SSIDs (up to 8), VLAN, QoS, WDS, Mesh support
Operating Temperature	0°C to 50°C
Storage Temperature	-10°C to 60°C
Humidity	10% to 90% non-condensing
Compliance	FCC, CE, RoHS
Maintenance	Clean with a dry cloth; avoid liquids
Spare Parts	Power adapter, mounting bracket (included)

Frequently Asked Questions - WDAP-W750E Planet

How do I reset the WDAP-W750E to factory defaults?

Locate the reset button on the device and press it for 10 seconds with a paperclip. The device will reboot and restore factory settings.

Does the WDAP-W750E support PoE?

Yes, it supports 802.3af/at PoE. You can power it via a PoE switch or injector.

How do I access the web interface?

Connect your computer to the same network, open a browser, and enter the default IP address (e.g., 192.168.1.100). Username and password are usually admin/admin.

Can I use this access point for outdoor installations?

No, the WDAP-W750E is designed for indoor use only. It is not weatherproof.

How many SSIDs can I create?

You can create up to 8 SSIDs per radio (2.4GHz and 5GHz), allowing separate networks for guests, IoT, etc.

Does it support VLAN?

Yes, the WDAP-W750E supports 802.1Q VLAN tagging, enabling segmentation of traffic.

How do I update the firmware?

Download the latest firmware from Planet's support site, go to Management > Firmware Upgrade in the web interface, and upload the file.

What is the maximum power output?

The device complies with local regulations. Typical output is up to 20 dBm per antenna, depending on the country.

Can I mount it on a wall?

Yes, it comes with a mounting bracket for wall or ceiling installation. Ensure proper ventilation.

Is there a warranty?

Planet products usually include a limited warranty. Check your purchase invoice or contact support for details.

USER MANUAL WDAP-W750E Planet

Thank you for choosing PLANET WDAP-W750E. Before installing the AP, please verify the contents inside the package box.

If there is any item missing or damaged, please contact the seller immediately.

-1--2--3-

2. Physical Introduction

Hardware Description

3. Hardware Installation

Step 1: Follow the figure below to install the WDAP-W750E.

Use the flat-blade screwdriver to take the cover of the WDAP-W750C off.

Step 2: Follow the figure below to install the WOMP-W750E.

graph LR
    A["Power Switch"] --> B["Internal Circuit Box"]
    B --> C["RMS Cable"]
    C --> D["WDAP-W750E"]
    D --> E["Sensor"]
    E --> F["Output"]
    G["Input Switch"] --> B
    style A fill:#f9f,stroke:#333
    style F fill:#ccf,stroke:#333

4. Wired Network Configuration (Windows 7 and Windows 10)

A computer with wired Ethernet connection is required for the first-time configuration of the Wireless AP.
1. Click the "Start" button located at the lower-left corner of your computer.
2. Click "Control Panel".
3. Double-click the "Network and Sharing Center" can.
4. Click "Change Adapter Settings".
5. Double-dick "Local Area Connection".
6. Select "Internet Protocol Version 4 (TCP/IPv4)" and click "Properties".
7. Select "Use the following IP address", and then click the "OK" button twice to save the configuration. For example, as the default address of the WDAP-W750E is 192.168.1.253 and the router is 192.168.1.251, you may choose from 192.168.1.1 to 192.168.1.252.

P

5. Enter into the Web Management

Default IP Address: 192.168.1.253 Default Username: admin Default SSID: PLANET_2.4G / PLANET_5G Default Wireless Encryption Type: None

Step 1

The Web management allows you to excess and manage the WDAP-W750E easily. Launch the Web browser and enter the default IP address http://192.168.1.253

Step 2

When the login window pops up, please enter the password. The default password is "admin". Then click the LOGIN button to continue.

For security reasons, it is recommended to change the password at the first login and memorize it.

Step 3:

After you enter into the Web User Interface, go to Advanced to configure your wireless network. For security reasons, we strongly recommend you to configure the Encryption Method and Passphrase of your wireless network.

Step 4:

Once the basic configuration of the W750E is done, click the "Apply".

WDAP

6. Wireless Network Connection

Step 1: Right-click on the network icon displayed in the system tray of your laptop or PC.

Step 2: Highlight the wireless network (SSID) to connect and click the [Connect] button.

Step 3: Enter the encryption key of the WDAPI W75CE if necessary.

You have already finished the configuration WMAP-W750E. Now you can use your iPhone, iPad, laptop or any other Wi-Fi device to connect with it wirelessly and start surfing the internet.

Further Information:

The above steps introduce the simple installations and configurations of the WOAP-W750E. For further configurations of different operation modes, please refer to the user manual, which can be downloaded from the website.

https://www.planet.com.br/cn/support/downloads?&m echo=keywords&keyword=WDAP-W7508view=3-1ist

If you have further questions, please contact the local dealer or distributor where you purchased this product.

PLANETTechnology Corp.

1. No. 26. Wassan Rd. Xindian Cdt. Kiy Taoei City 201. Taiwan

2011年1月10日