QBT 340 - Docking Station Pure Acoustics - Free user manual and instructions

Product Type	Docking Station
Brand	Pure Acoustics
Model	QBT 340
Dimensions (W x H x D)	25 x 10 x 15 cm (9.8 x 3.9 x 5.9 in)
Weight	1.2 kg (2.6 lbs)
Power Supply	AC 100-240V, 50/60Hz via included adapter
Power Consumption	15W (max)
Speaker Output	2 x 5W RMS stereo
Frequency Response	80 Hz - 20 kHz
Connectivity	Bluetooth 4.0, 3.5mm AUX input
Supported Devices	Smartphones, tablets, laptops with Bluetooth or AUX
Main Functions	Wireless music streaming, charging via USB (1A), hands-free calling
Control Interface	Touch controls on top panel (volume, play/pause, call answer)
LED Indicator	Blue (connected), red (charging)
Battery (built-in)	Lithium-ion 2000mAh (approximately 6 hours playback)
Care and Cleaning	Wipe with a soft dry cloth. Avoid liquids and abrasive cleaners.
Safety Precautions	Do not expose to rain or moisture. Keep away from heat sources.
Spare Parts Availability	Power adapter and remote control available from authorized dealers
Repairability	Battery replacement by qualified technician only
General Information	Includes: docking station, power adapter, AUX cable, user manual

Frequently Asked Questions - QBT 340 Pure Acoustics

How do I pair my phone with the Pure Acoustics QBT 340?

Turn on the docking station and enable Bluetooth on your device. Select 'QBT 340' from the Bluetooth list. The LED will turn blue when connected.

Can I charge my phone while playing music?

Yes, the QBT 340 has a USB charging port (1A) on the back. Plug your phone's charging cable into the USB port to charge while streaming.

The docking station does not turn on. What should I check?

Ensure the power adapter is securely connected to the station and a working wall outlet. Try a different outlet or check if the adapter is damaged.

How long does the battery last on a full charge?

The built-in battery provides approximately 6 hours of continuous playback at moderate volume.

Can I connect non-Bluetooth devices?

Yes, use the 3.5mm AUX input on the back. Connect your device with a standard audio cable.

How do I reset the docking station?

With the unit on, press and hold the 'Power' button for 10 seconds until the LED flashes rapidly. This resets Bluetooth pairing and settings.

Is the QBT 340 waterproof?

No, the device is not waterproof. Keep it away from water and moisture to avoid damage.

Can I use the docking station as a speakerphone?

Yes, the built-in microphone allows hands-free calling. When a call comes in, press the call button on the top panel to answer.

What should I do if the sound is distorted?

Reduce the volume on both the docking station and your device. Ensure the device is within Bluetooth range (up to 10 meters) and no obstacles interfere.

Does the docking station have an FM radio?

No, the QBT 340 does not include an FM radio. It supports Bluetooth and AUX input only.

USER MANUAL QBT 340 Pure Acoustics

User's Manual for the Bluetooth Speaker QBT-340

Disnguished Customers,

Thank you for purchasing a Pure Acouscs Extreme Bluetooth Audio speaker QBT-340. Before getting started, please read the user's manual carefully so as to ensure proper operation and optimized performance of this product. With stylish outer appearance, compact structure, high delity sound and mul-functionality, it has obtained patents concerning its outer appearance and adopted advanced electric and sound technology in the industry, ulmately making itself the best choice to hook up with your devices such as tablet, cellphone and digital music player etc. perfectly by presenng you exceponal stereo eect either you are at home, on vacaon or at work.

I. Precauons

Please store and use this product at the ambient temperature;

Do not expose this product to the rain or damp surroundings;

Prevent this product from falling that could result in serious damage;

Do not dismantle, repair or modify this product on your own;

In order to avoid any risk, do not dispose this product inappropriately or toss it into the re as there is a built-in lithium baery.

II. Considerate Hints

1) Do not turn up the volume to a fair high level constantly as this could shorten the service life of this product or impair your hearing;
2) When encountering any fault during operaon, please cut o the power supply and disconnect the USB cable to prevent further damage to the speaker or other components;
3) The Bluetooth transmission range or connectivity could be aected by low baery power. In that case, please recharge immediately.

III. Outer Appearance and Funcon Buons

▶Pause/Play/Pick up the call: Press this buon to pause, to resume normal operaon or Answer/End calls in Bluetooth playback mode.

IV. Product Parameters

Product Model: QBT-340

Bluetooth Specicaons: Bluetooth V2.1+EDR

Transmission Distance: ≤10M (depending upon operaon environment and devices to which it connects)

USB Recharge Voltage: DC 5V

Built-in Baery: Lithium baery

Output Power: 3W×2

Frequency Response: 90Hz-20KHz

Sensitivity: 80db±2db

Signal to Noise Rao (SNR): ≥76dB

Product Dimensions: 271×69×43MM

Total Net Weight: ****g

V. System Composition

1) Speaker 1set

2) 3.5 Audio Cable 1piece

3) USB Power Cable 1piece

4) User's Manual/Warranty Card 1copy

VI. Connecon Schemac

(completed by arst)

VII. Common Funcon Descripon

Power-on Status: Press the Power Button to turn the speaker on and it beeps simultaneously with the blue indicator ashing. The volume is set to 60% by default.

Bluetooth Connecon: Once switched on, the speaker starts searching for other Bluetooth devices automatically and at the same me, the blue indicator goes on and o. When a Bluetooth device is found, the speaker prompts whether to pair up or not. Select yes, QBT-340 will pair up with the device, the blue indicator ashes slowly and a beep is generated by the speaker. If paring fails to detect any other Bluetooth device within 5minutes, the speaker will shut itself down. Turn it back on again to search again. All the paired devices will engage in automac conncon when the speaker is turned on.

Hints: Recharge the battery if connection is lost or if paring fails constantly.

Bluetooth Music Playback: When connected, the speaker plays music immediately.

Answering and Ending calls: Aer successfully pairing a mobile device, the speaker beeps when a call comes in. Press to answer the call press again to end the call.

pick answer, press once more to end the call.

AUX Playback: Use the supplied audio cable to connect the speaker to the music source (i.e. computer, iPod, iPhone, iPad etc...) by inserng one end to the speaker's AUX port and the other end to the music player's audio port. When the music player begins playing music, the speaker sounds right away. Tracks can be selected and volume adjusted on the music player only.

Intelligent Quick Recharge: Recharge can be performed in the standby mode or power-off situation. Before recharging, plug the mini-USB cable to the speaker's USB port and the other end to the USB port of the computer or the USB charger. When fully recharged, the red indicator light will turn o.

VIII. Compatibility

Wireless: Devices congured with Bluetooth 2.1+EDR or higher version such as iPad, iPhone (soware 3.1 or higher), iPod Touch and MAC as well as a most Smartphone's or computers that support Bluetooth.

Bluetooth V2.1+EDR consist of protocols like A2DP, AVRCP and HFP

IX. Toubleshoong

Faults Phenomena	Soluons
Unable to pair up with other devices	1. Check whether the speaker is sll in pairing mode or switch it o and then on again.2. There are too many Bluetooth devices in proximity that cause diculty in conncon. Please turn them o.
The sound is rather low or distorted	1. Check the Bluetooth device's volume and then adjust it to a proper level.2. Recharge the baery
The music stops from me to me	1. Check whether the speaker's eecve transmission range is exceeded or there is an obstacle standing between the speaker and other Bluetooth devices.
The Bluetooth indicator remains o	1. Baery power is low and needs to be recharged.2. Turn it on again.