ENER008 - Power Strip EnerGenie - Free user manual and instructions

Product Type	Power Strip / Surge Protector
Model	ENER008
Brand	EnerGenie
Number of Outlets	8
Power Rating	230V, 50Hz, 16A
Max Power Load	3680 W
Surge Protection	Yes, with indicator light
USB Ports	2x USB-A (5V, 2.4A total)
Cord Length	1.8 m (6 ft)
Dimensions (LxWxH)	30 x 6 x 4 cm
Weight	0.5 kg
Housing Material	Flame-retardant plastic
Safety Shutter	Yes, on each socket
Overload Protection	Automatic circuit breaker
Cable Type	H05VV-F 3G1.5mm²
Plug Type	Schuko (CEE 7/7) or compatible
Certifications	CE, RoHS
Mounting Option	Wall-mountable (keyhole slots)
Operating Temperature	0°C to 40°C
Cleaning	Wipe with dry cloth; do not use liquids
Energy Saving Features	Master/slave switch (optional)

Frequently Asked Questions - ENER008 EnerGenie

What is the maximum power load of the EnerGenie ENER008 power strip?

The maximum power load is 3680 W at 230V / 16A. Do not exceed this limit to avoid overheating.

Does the ENER008 have surge protection?

Yes, it features built-in surge protection with an indicator light. If the light goes out, protection may be compromised.

Can I plug the power strip into an extension cord?

It is not recommended to daisy-chain multiple power strips or use extension cords, as this increases fire risk and may overload the circuit.

How many USB devices can I charge simultaneously?

You can charge up to two USB devices using the built-in USB-A ports. Total output is 5V 2.4A shared.

Is the ENER008 suitable for outdoor use?

No, this power strip is designed for indoor use only. Keep it away from moisture, dust, and extreme temperatures.

What should I do if the surge protection indicator light is off?

If the indicator is off, the surge protection feature may be degraded or non-functional. Consider replacing the power strip to ensure continued protection.

Can I wall-mount the ENER008 power strip?

Yes, the rear panel has keyhole slots for vertical wall mounting. Use appropriate screws and anchors for a secure fit.

How do I clean the power strip?

Unplug the strip and wipe the exterior with a dry, soft cloth. Do not use water, solvents, or abrasive cleaners.

What type of plug does the ENER008 have?

It comes with a Schuko plug (CEE 7/7) suitable for European sockets. For other regions, an adapter may be needed.

Does the ENER008 have child safety shutters?

Yes, each outlet is equipped with safety shutters to prevent insertion of foreign objects.

USER MANUAL ENER008 EnerGenie

your switch is my command

White power strip with green indicator lights and a terminal plug, alongside a green 'jie®' logo (no text or symbols on the main subject)

PC – Automatic Standby Shutdown

Installation(see picture)

a. Plug your Desk Computer and other office appliances such as printers, monitors, scanners etc into any of the 4 controlled socket of the extension lead. Plug any device requiring continuous power e.g. fax machine into the always above pocket.
b. Stick the reset button conveniently on or near to your computer.

First time set up First time learning power learning

c. Plug the extension lead into a mains wall socket and switch ON.
d. The operating light should flash slowly for 3 seconds then remain illuminated. (If it doesn't, press the button on the device for 4 seconds at least until the light starts flashing). The device is now in power learning mode.
e. Place all your connected devices into Standby and wait for at least 30 seconds.
f. Then press the button on the device to end the learning cycle. The light will turn off and the sockets are off.

TōfūnriOONNthS Slockets: :

Press the reset button on the flying lead. The light on the Standby Shutdown will illuminate indicating all the controlled sockets are re-powered. Power up your computer system as usual.*

-To turn OFF::

Power down your desk computer as normal. After 1 minute the Standby Shutdown will automatically turn off the power to all the controlled sockets.

* Note: You may also press the button on the front of the Standby Shutdown device to re-enable the sockets.

Note: The Standby Shutdown will retain its memory after a loss of power.

If you wish to change the number of connected appliances you will need to re-enter the power learning cycle. Press the button on the front of the device for 4 seconds to clear the previously set power level.

The indicator light will start flashing ready. Then carry on from e.

Note: The Standby Shutdown will retain its memory after a loss of power.

Specification

Voltage: 240V\~50Hz

Max .current: 13A

Max. load: 3kW

Colour: Black/White

Mains cable: 1.5m

Sensor cable: 1.3m

4 controlled sockets

1 always ON socket

Product code: ENER008

Power consumption in standby: <1W.