WAVE 210-U - Kitchen sink BLANCO - Free user manual and instructions

Product Type	Kitchen Sink
Brand	BLANCO
Model	WAVE 210-U
Material	Stainless steel, 18/10
Finish	Satin
Installation Type	Under-mount
Number of Bowls	1
Overall Dimensions	33 5/8" x 22" x 9 3/4" (858 x 559 x 248 mm)
Bowl Dimensions	28" x 16" x 9" (711 x 406 x 229 mm)
Weight	30 lbs (13.6 kg)
Drain Opening	3 1/2" (89 mm)
Minimum Cabinet Size	36" (914 mm)
Sound Deadening	Sound-absorbing pads
Included Accessories	Drain kit, mounting clips, template
Warranty	Limited lifetime
Cleaning Instructions	Use mild soap and soft cloth; avoid abrasive cleaners
Compatible Faucet Holes	Pre-drilled for standard faucets (3 holes on 4" centers or optional single hole)
Certifications	cUPC, ASME A112.19.3

Frequently Asked Questions - WAVE 210-U BLANCO

What are the exact dimensions of the BLANCO WAVE 210-U sink?

The overall dimensions are 33 5/8 inches (858 mm) long, 22 inches (559 mm) wide, and 9 3/4 inches (248 mm) deep. The single bowl measures 28 inches (711 mm) by 16 inches (406 mm) by 9 inches (229 mm).

Can this sink be installed as a drop-in instead of under-mount?

No, the BLANCO WAVE 210-U is designed specifically for under-mount installation. It requires a countertop cutout and must be mounted from below the counter.

What type of faucet is compatible with this sink?

The sink comes pre-drilled for a standard faucet with three holes on 4-inch centers, or it can accommodate a single-hole faucet using the optional deck plate. Any standard kitchen faucet with a 1- or 3-hole configuration will fit.

Is the sink scratch-resistant?

The 18/10 stainless steel construction is durable and resistant to everyday wear, but it can scratch over time. Using a cutting board and soft cleaning tools helps maintain the satin finish.

How do I clean the sink properly?

Clean with a mild dish soap and a soft cloth or sponge. Avoid abrasive cleaners, scouring pads, or bleach, as they can damage the satin finish. Rinse thoroughly and dry with a soft towel to prevent water spots.

What is the minimum cabinet size required?

A minimum cabinet size of 36 inches (914 mm) is recommended to accommodate the sink's 33 5/8-inch length and allow for proper clamping and plumbing access.

Does the sink include a drain assembly?

Yes, the sink comes with a drain kit including a 3 1/2-inch drain strainer and basket, as well as mounting hardware. An additional garbage disposal flange may be purchased separately.

How thick is the stainless steel?

The sink is made from 18/10 stainless steel with a thickness of approximately 1.2 mm (18 gauge), providing a balance of durability and weight.

Can I use a garbage disposal with this sink?

Yes, the 3 1/2-inch drain opening is compatible with standard garbage disposals. Ensure the disposal unit is mounted securely and the sink is supported properly.

What warranty does BLANCO offer for this sink?

BLANCO provides a limited lifetime warranty to the original purchaser against defects in material and workmanship, covering the sink body for as long as you own the home.

USER MANUAL WAVE 210-U BLANCO

BLANCO

BLANCO GmbH + Co KG

Edelstahl / Stainless steel

M 1:5

04/2009

Subject to technical alterations

Most updated version under www.blanc.com

wave 210-u_s_uz

1000185554