Morning Call 3 - Alarm Clock ILUV - Free user manual and instructions

Product Type	Alarm Clock
Brand	iLuv
Model	Morning Call 3
Dimensions (approx.)	4.5 x 4.5 x 2.5 inches
Weight	0.5 lbs
Power Source	AC adapter (included) or 2 AAA batteries (for backup)
Display Type	LED, adjustable brightness
Alarm Modes	Buzzer, FM radio
Snooze Function	Yes, 9-minute snooze
Dual Alarm	Yes
Radio	FM tuner
Backup Battery	Maintains time and alarms during power outage
Additional Features	USB charging port, temperature display
Maintenance & Cleaning	Wipe with a soft, dry cloth; do not use liquids or abrasives
Safety Instructions	Do not immerse in water; keep away from heat sources
Replacement Parts	Batteries (AAA), AC adapter (if lost)
Repairability	Not user-serviceable; contact iLuv support for issues

Frequently Asked Questions - Morning Call 3 ILUV

How do I set the time on the iLuv Morning Call 3?

Press and hold the TIME SET button until the hour flashes. Use the + and - buttons to adjust. Press TIME SET again to set minutes. After setting, press TIME SET to confirm.

How do I set an alarm?

Press the ALARM 1 or ALARM 2 button to enter alarm set mode. Use +/- to adjust hour and minute. Choose alarm sound (buzzer or radio) with the MODE button. Press ALARM to save.

How do I activate or deactivate the snooze function?

When the alarm sounds, press the SNOOZE button (large button on top) to snooze for 9 minutes. To turn off the alarm completely, press the ALARM OFF button. Snooze is always active; you cannot disable it.

Why is the display dim or not showing?

The display brightness may be set low. Press the DIMMER button (usually on the back or side) to cycle through brightness levels. If the display is off, ensure the clock is plugged into AC power and the backup batteries are fresh.

Does the clock have a battery backup?

Yes, insert 2 AAA batteries in the compartment on the bottom. The backup preserves the time and alarm settings during a power outage. The display will not light up on battery alone to save power.

How do I set the FM radio alarm?

Press the ALARM button to enter alarm set mode. Repeatedly press the MODE button until 'RADIO' appears. Use TUNE or +/- to select a station. Press ALARM to save. Ensure the antenna is fully extended for best reception.

Can I charge my phone using this alarm clock?

Yes, the Morning Call 3 features a USB charging port on the back. Connect your device's charging cable to charge at 5V/1A (standard). Charging is available only when the clock is plugged into AC power.

How do I reset the clock to factory settings?

Use a paperclip to press the RESET button (small hole on the back or bottom). This clears all settings, including alarms, time, and radio presets. You will need to set them again.

What should I do if the alarm does not sound?

Check that the alarm is set (alarm indicator icon on display). Verify the volume is not set to minimum (press VOLUME or adjust with +/-). Ensure the selected alarm sound (buzzer or radio) is working. For radio, check station signal.

How do I clean the alarm clock?

Unplug the clock and remove batteries. Wipe the exterior with a soft, dry cloth. Do not use water, cleaning liquids, or abrasive materials. Avoid getting moisture into any openings.

USER MANUAL Morning Call 3 ILUV

1.2" Jumbo White LED Display Dual Alarm Clock with Time Projection, FM Radio, USB Charging Port, and AC Power Adapter

WARNING AND SAFETY INSTURCTIONS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

1. All the safety and operating instructions should be read before the product is operated
2. The safety and operating instructions should be retained for future reference.
3. All warnings on the product and in the operating instructions should be adhered to.
4. All operating and use instructions should be followed.
5. Use of controls or adjustments or performance other than those specified may result in hazardous radiation exposure.
6. Do not use this product near water or expose to rain to prevent fire or shock hazard. i.e. bathtub, washbowl, kitchen sink, laundry tub, wet basement, or swimming pool, etc.
7. Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean only with a dry cloth.
8. Unplug Morning Call 3 during lightning storms or when unused for long periods of time.
9. When main plug is connected, Morning Call 3 is readily operatable. In order to disconnect Morning Call 3 completely, the main plug should be disconnected from the main socket outlet.
10. Battery shall not be exposed to excessive heat such as sunshine or fire.
11. If battery is incorrectly replaced, it may cause explosion. Replace only with the same or equivalent type.

OVERVIEW OF THE PRODUCT

20

PROJECTION ON-OFF/180° FLIP11

Top-down view of a computer monitor with a grid and mouse pointer (no text or symbols visible)

Back
Parte trasera

Simple line drawing of a vertical cylindrical device with two ports and directional arrows indicating flow or movement (no text or symbols)

AC Adaper
Adaptador CA

1 Connect the cord of the power adapter to the DC power input jack of the Morning Call 3.

2 Connect the plug of the power adapter to a wall outlet.

3 Morning Call 3 display will be on, indicating that it is powered on and in standby mode.

1 Morning Call 3 is equipped with a backup system. It requires a 3 V lithium battery (type: CR2032). Insert the battery into the battery compartment and make sure the positive and negative (+ or -) sides of the battery are in contact with the corresponding terminals in the battery compartment.

2 In the event of power failure or disconnection of the power cord, the power supply is automatically switched to the backup battery, keeping the time and alarm settings.

3 To open the battery compartment, use a screwdriver to detach the screw on the compartment door.

4 When replacing the battery, do not disconnect the power adapter. Otherwise, all clock and alarm settings will be lost.

SETTING TIME

AJUSTAR LA HORA

1 In standby mode, press and hold the [TIME/PRESET] button to enter the clock setting mode.

2 Press the [TIME/PRESET] button repeatedly to cycle through the setting options: Year > Month/Day > Time

3 Setting year: Press [TUN-/HOUR] or [TUN+/MIN] button. Press [TIME/PRESET] button to confirm.

4 Setting month/date: Press the [TUN-/HOUR] button to set the month and [TUN+/MIN] button to set the date. Press and hold the [TUN-/HOUR] or [TUN+/MIN] button to move fast. Press [TIME/PRESET] button to confirm.

5 Setting the time: Press the [TUN-/HOUR] button to set the hour and [TUN+/MIN] button to set the minute. Press [TIME/PRESET] button to confirm.

The Morning Call 3 lets you have 2 alarm settings.

1 In standby mode, press and hold the [AL 1/Vol-] button to enter the alarm time setting mode.

2 In the alarm setting mode, press the [AL 1/Vol-] button repeatedly to cycle through the setting options: Alarm time > Alarm sound source > Alarm frequency

3 Setting alarm time: Press [TUN-/HOUR] to set the hour and [TUN+/MIN] button to set the minute. Press [AL 1/Vol-] button to confirm.

4 Setting alarm sound source: Press the [TUN-/HOUR] or [TUN+/MIN] button to select the buzzer or radio as the alarm sound source. The corresponding alarm indicator on display will turn on according to your selection: Alarm 1 (BUZZER) or Alarm 1 (RADIO). Press [AL 1/Vol-] button to confirm.

5 Setting alarm frequency: Press the [TUN-/HOUR] or [TUN+/MIN] button to select an alarm frequency

Press [AL 1/Vol-] button to confirm.

Every Weekend

6 *One day only set up: Press the [AL 1/Vol-] button when this option is selected. Then press the [TUN-/HOUR] or [TUN+/MIN] to select a specific day for the alarm activation.

2 = Tuesday martes 6 = Saturday sábado

3 = Wednesday miércoles 7 = Sunday domingo

4 = Thursday jueves

Press [AL 1/Vol-] button to confirm.

Pulse el botón [AL 1/Vol-] para confirmar.

7 Once the alarm setting is done, the alarm will be on with the corresponding alarm indicator (buzzer or radio) on.

2 Press the [SNOOZE/SLEEP/DIMMER] button to temporarily deactivate it. The snooze function will extend your alarm in increments of 9 minutes.

3 The corresponding Alarm 1 or Alarm 2 indicator (buzzer or radio) will flash on the display during the snooze period.

TO STOP THE ALARM WHEN ALARM GOES OFF

PARAR LA ALARMA CUANDO ESTA SE DISPARA

1 Press [POWER/RADIO/AL OFF] button to stop the alarm.

TO DISABLE THE ALARM

DESHABILITAR LA ALARMA

1 Press [AL1/Vol-] button once to disable Alarm 1 while the alarm is not going off. Press [AL2/Vol+] button once to disable Alarm 2 while the alarm is not going off.

2 Corresponding alarm indicator will be off and the alarm will not go off until you enable it again.

1 You can set a sleep timer to have your music automatically turn off while you are sleeping

2 When the radio is on, press [SNOOZE/SLEEP/DIMMER] button repeatedly to select the number of minutes you want your music to play: 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120 minutes or 00).

3 The display will change back to the current time if you do not press any button for 3 seconds.

4 The radio will stop playing once the sleep timer has finished.

5 Press the [SNOOZE/SLEEP/DIMMER] button to check the remaining time before the radio turns off.

6 To stop sleep mode before the time is out, press the [SNOOZE/SLEEP/DIMMER] button to select '00'.

1 Tune to a station.

2 Press and hold [TIME/PRESET] button until "P01" (or the next available preset) shows on the display.

3 Press the [TUN-/HOUR] or [TUN+/MIN] button to select a preset number (P01-P10).

4 Press the [TIME/PRESET] button to confirm. The preset station has been set.

5 Press the [TIME/PRESET] button repeatedly while listening to the radio to select a preset station. Alternatively, press the [TIME/PRESET] button once and then press the [TUN-/HOUR] or [TUN+/MIN] button to select a preset station.

1 Press the [PROJECTION ON-OFF/FLIP] button to project the current clock time on the ceiling or the wall.

2 Press and hold the [PROJECTION ON-OFF/FLIP] button to flip the projected image.

3 Turn the Projector focus adjustment dial to adjust the image sharpness.

1 In standby mode, press [TIME/PRESET] button repeatedly to see the information of day*, year, date and time

2 In radio mode, press the [TUN-/HOUR] or [TUN+/MIN] button once to briefly change the display from the clock time to the current radio frequency.

1 In standby mode, press the [SNOOZE/SLEEP/DIMMER] button to change the brightness level of the display: low, high or off.

2 Default setting of the dimmer level is "low"

1 To charge other devices such as smartphone or MP3 player, connect one end of the USB charging cable (not included) to the USB charging port on the back of the main unit

2 The Morning Call 3 cannot access the contents in the connected device.

Diagram of a device rear panel with a USB port and connector (no text or symbols)

SPECIFICATIONS

ESPECIFICACIONES

If you have any question or need support, please contact us by visiting http://support.iLuv.com or call customer service department at 1-866-807-5946.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment

iLuv Creative Technology ("iLuv") warrants, to the original purchaser, that its products will be free from defects in materials, parts, and workmanship for the periods designated in each Product. The Warranty begins on the date of product purchase and covers a period of two years for products purchased in the European Union, and one year for products purchased in other countries (including the United States and Canada), iLuv can exercise the option, during any warranty service, to replace your product with a new or remanufactured unit, equivalent to your original purchase. For information on proper installation, operation and use consult the manual supplied with the product. If a replacement manual is required, visit our website, www.iLuv.com to download a manual.

EXCLUSIONS

This Warranty does NOT apply if the serial number is altered or removed. It does not cover cosmetic damage, antenna damage or loss, damage to AC power cords, cabinets, headbands, ear-pads, or damage due to power line surges, connection to an improper voltage source, the use of improper settings, general misuse, mishandling or improper application, accidents, acts of God, repairs attempted by an unauthorized service agent, or damage incurred while the product is being returned to iLuv. If the product was purchased outside the United States, please find an authorized distributor as listed on our web site: www.iLuv.com

OBTAINING WARRANTY SERVICE

Customers must obtain a Customer Return Authorization number (CRA) on our web site, www.ilux.com (EXPRESS CUSTOMER SUPPORT) to obtain a ticket. Fill out the on-line form including the product's Date of Purchase, its Model Number, a brief description of the problem, and your daytime telephone number, or customers in the United States and Canada may contact our Customer Service Department at [phone] if the problem appears to be related to a defect in material or workmanship.

RETURNING YOUR PRODUCT

The product must be accompanied with a dated proof of purchase, indicating the place of purchase, the model, and amount paid. Send the unit, prepaid, to the address below in suitable protective packaging that meets UPS standards. You must include the CRA number on the outside box, and your telephone number and return shipping address within the package. Return shipments are at the customer's expense, and the return must be

accompanied by the original proof of purchase. We strongly recommend insuring the shipment as appropriate because the customer is responsible for the product until it arrives at iLuv (for U.S. returns) or its authorized distributor (for all other countries).

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER ILU SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE DURATION OF THIS WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state and country to country.

INSTRUCTIONS ON ENVIRONMENT PROTECTION

Do not dispose of this product in the usual household garbage at the end of its life cycle; bring it to a collection point for the recycling of electrical and electronic appliances. This symbol on the product means the instructions for use or the packing will inform about the methods for disposal. The materials are recyclable as mentioned in its marking. By recycling, material recycling, or other forms of re-utilization of old appliances, you make an important contribution to protect the environment. Please inquire at your local community administration for the authorized disposal location.

FCC NOTICE (USA)

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

iLuv Creative Technology

2 Harbor Park Drive

Port Washington, NY 11050

GARANTÍA LIMITADA

O QUE COBRE?

iLuv Creative Technology 2 Harbor Park Drive

Port Washington, NY 11050

iLuv®

Designed by iLuv in New York