Mammoth Flip - Pump Blackburn - Free user manual and instructions

Product Type	Floor Pump
Brand	Blackburn
Model	Mammoth Flip
Material	Steel barrel, composite base
Height	65 cm (25.6 inches)
Barrel Diameter	3.2 cm (1.25 inches)
Weight	0.9 kg (2 lbs)
Power Source	Manual (hand-operated)
Max Pressure	160 psi (11 bar)
Valve Compatibility	Presta and Schrader
Gauge	Built-in, analog, 2" diameter
Handle	Flip-style, ergonomic
Base	Wide, stable composite
Hose	Braided, 85 cm (33 inches)
Frame Mount	Included, attaches to bike frame
Intended Use	Inflating bicycle tires and other inflatables
Maintenance	Occasional lubrication of O-ring; keep barrel clean
Safety	Do not exceed max pressure; use only with compatible valves
Spare Parts Available	Replacement hoses, heads, and seals
Repairability	User-serviceable with common tools
Warranty	Limited lifetime warranty

Frequently Asked Questions - Mammoth Flip Blackburn

How do I switch between Presta and Schrader valves?

The pump head has a reversible core. Unscrew the cap, flip the internal gasket, and reattach. The Mammoth Flip comes with a dual-head that works with both valve types without adapters.

What is the maximum pressure I can achieve?

The pump is rated up to 160 psi (11 bar). However, for most bicycle tires, 30-80 psi is sufficient. Always check your tire sidewall for recommended pressure.

How do I mount the frame mount?

The included frame mount attaches to your bike's frame with cable ties or velcro straps. Secure it to a tube, then slide the pump body into the mount until it clicks.

Why does the pump feel hard to push?

This is normal when inflating a tire from low pressure. Ensure the valve is fully open and the pump head is seated correctly. If resistance persists, check the O-ring for wear and lubricate if needed.

Can I use this pump for car tires?

While technically possible for small car tires, the Mammoth Flip is designed for bicycles. For car tires, a high-volume pump is more efficient and quick.

How do I maintain the pump?

Periodically apply a drop of silicone oil to the piston O-ring. Keep the barrel clean and dry. Store in a dry place to prevent rust. Check the hose and head for cracks.

What does the gauge read when not in use?

The gauge should read zero when no pressure is applied. If it shows a different value, the needle may be stuck; gently tap the gauge face.

Is the pump repairable?

Yes, replacement parts such as hoses, heads, and seal kits are available from Blackburn. The pump can be disassembled with common tools.

The pump head leaks air. What should I do?

Check the rubber gasket inside the head. If damaged, replace it. Also ensure the valve is fully inserted and the lever is locked. Tighten any loose screws on the head.

Can I use the frame mount on any bike?

The mount fits most standard bike frames with tube diameters between 22-35 mm. For oversized or carbon frames, use extra padding or a different mounting solution.

USER MANUAL Mammoth Flip Blackburn

Includes frame mount

Blackburn.

5550 Scotts Valley Drive, Scotts Valley, Ca 95066

Customer Service: 1-800-456-2355

Blackburndesign.com

Printed in China

LIFETIME

WARRANTY