CLS1X - Electric razor Conair - Free user manual and instructions

Product Type	Hair Clipper/Trimmer
Brand	Conair
Model	CLS1X
Dimensions (approx.)	18 cm x 4 cm x 4 cm
Weight (approx.)	200 g
Power Source	Rechargeable lithium-ion battery
Battery Life	Up to 60 minutes of cordless use
Charging Time	8 hours for full charge
Blade Material	Stainless steel
Cutting Length Settings	Adjustable from 0.5 mm to 10 mm with included comb attachments
Motor Speed	6,000 strokes per minute
Cordless Operation	Yes
Washable Blades	Yes, removable for easy cleaning
Oil Included	Yes, for blade maintenance
Safety Features	Blade guard, auto shut-off after 30 minutes of inactivity
Spare Parts Available	Replacement blades and chargers
Accessories Included	4 guide combs, cleaning brush, oil, charging cable
Warranty	2 years limited
Country of Origin	China

Frequently Asked Questions - CLS1X Conair

How do I charge the Conair CLS1X hair clipper?

Plug the charging cable into the clipper and connect to a USB power source. The LED indicator will turn red during charging and green when fully charged. A full charge takes approximately 8 hours.

Can I use the clipper while it's charging?

No, the CLS1X is designed for cordless use only. Do not operate while connected to the charger.

How do I adjust the cutting length?

Attach one of the included guide combs for different lengths (1.5 mm to 10 mm). The blade can also be adjusted for fine trimming using the lever on the side (0.5 mm to 3 mm without comb).

How do I clean the blades?

Turn off the clipper, remove the blade assembly, and rinse under running water. Use the included brush to remove hair debris. Dry thoroughly before reassembling. Apply a drop of oil to the blades after cleaning.

What is the warranty on the Conair CLS1X?

The Conair CLS1X comes with a 2-year limited warranty against defects in materials and workmanship. Keep your receipt as proof of purchase.

Can I use the clipper for pet grooming?

The CLS1X is designed for human hair trimming only. Using it on pets may damage the blades and void the warranty.

How often should I oil the blades?

Oil the blades before each use or after cleaning. Apply one drop of oil to the blade teeth and run the clipper for a few seconds to distribute.

Why is my clipper not turning on?

Ensure the battery is charged. If it still does not work, check that the blade guard is removed and the safety lock (if any) is disengaged. If the issue persists, contact Conair customer support.

Are replacement blades available for the CLS1X?

Yes, replacement blades can be purchased from Conair's website or authorized retailers. Look for model-specific CLS1X blades.

How do I store the clipper when not in use?

Attach the blade guard, ensure it is clean and dry, and store in a cool, dry place. Avoid storing in damp areas. Keep out of reach of children.

USER MANUAL CLS1X Conair

IMPORTANT SAFETY INSTRUCTIONS

THE APPLIANCE MUST NOT COME INTO CONTACT WITH WATER.

DO NOT USE ON DAMP TEXTILES!

The fabric shaver might damage structured textiles or very soft materials such as Angora wool. Always test on an area that is not visible on the item you want to treat. In testing, set the distance ring to the highest level.

OPERATING INSTRUCTIONS

1. Put the item you want to treat on an even surface.
2. Turn the distance ring to the appropriate position or remove the ring entirely, depending on the distance required.
3. Switch the unit ON.
4. Without applying pressure, run the shaver head lightly over the parts you wish to remove the fuzz from. Fuzz will accumulate in the fuzz collector.
5. After use, switch the unit OFF.

IMPORTANT: Empty the fuzz collector regularly and before it becomes overfilled, which can cause the unit to slow down or stop. If unit slows or stops, check and empty fuzz collector prior to replacing the batteries.

REMOVING AND FITTING THE DISTANCE RING

TO REMOVE: Grasp both sides of the ring and pull it off the unit in the direction of the arrow.

TO FIT: Push the distance ring onto the unit so that the recess on the distance ring engages the lug on the body of the shaver. This ensures that the distance ring does not twist when you adjust it.

Slide the fuzz collector downward and out of the unit.

Empty the collector and slide it straight into the unit until it engages audibly.

CLEANING THE FABRIC SHAVER AND SHAVER HEAD

1. Remove the batteries from the appliance.
2. Remove the distance ring and turn the shaver head counterclockwise to remove it.

1. Brush out residual fuzz with any small cleaning brush. CAUTION: Blades are extremely sharp and can be damaged easily.
2. Reattach the shaver head and fit the distance ring.
   If necessary, wipe off the unit casing with a slightly dampened cloth.

INSERTING BATTERIES

Open the battery compartment by sliding the mark on the battery compartment lid against the marking arrow on the handle to o and lift it off. Insert the two (2) AA batteries (not included) so that the +/- terminals on each battery match the markings in the battery compartment. Place the battery cover back on and then turn it in the direction of ● until it engages audibly.

INSTRUCTIONS FOR USING BATTERIES

• Always purchase the correct size and grade of battery most suitable for the intended use.
- Replace all batteries at the same time.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
- Clean the battery contacts as well as those of the device prior to battery installation.
- Ensure that the batteries are installed correctly with regard to polarity (+ and -).
- Remove batteries from equipment that is not to be used for an extended period of time
- Remove depleted batteries promptly.

DISPOSAL OF BATTERIES

When replacing the batteries, make sure you dispose of the old batteries in accordance with applicable regulations. They should be disposed of in a location specifically designated for that purpose so they can be recycled safely without posing any risk to the environment. Do not burn or bury them.

19P4062237

©2020 Conair Corporation Hecho en China

GETTING TO KNOW YOUR FABRIC SHAVER

un Estado a otro.

Conair will repair or replace (at our option) your unit free of charge for 12 months from the date of purchase if the appliance is defective in workmanship or materials.

To obtain service under this warranty, return the defective product to the service center listed on back that is nearest you, together with your purchase receipt and \$5.00 for postage and handling. California residents need only provide proof of purchase and should call 1-800-366-0937 for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 12 months from the date of manufacture.

ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 12-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

Service Centers Conair Corporation Service Department 7475 N. Glen Harbor Blvd. Glendale, AZ 85307

For information on any Conair product, call 1-800-3-CONAIR or visit us on the web at www.conair.com

Please register this product at www.conair.com/registration

©2020 Conair Corporation Made in China

19PA062237