HMPS - Power Supply Holland Electronics - Free user manual and instructions

Product Type	Power Supply Unit
Model	HMPS
Brand	Holland Electronics
AC Input Voltage	95-240 VAC (50-60 Hz)
DC Output Voltage	2 x 12 VDC
Output Current per Channel	2 Amperes
Protection	Short Circuit & Overload
Regulation	5%
Ripple	25 mV
Installation	Slide into HMR rack, connect power and jumper to HMMS/HMD units
Warranty	5 years from original purchase
Warranty Service	Contact [phone] for RMA
Waterproof Rating	Not waterproofed
Safety Warnings	Do not expose to rain or moisture; fully insert plug blades
Grounding Requirement	Per NEC Article 820-22
Power Cord	Included AC power cord
Compatible Accessories	HMMS, HMD units
Usage	Indoor, dry location
Certifications	Not specified

Frequently Asked Questions - HMPS Holland Electronics

What is the input voltage range of the HMPS power supply?

The HMPS accepts an AC input of 95-240 VAC at 50-60 Hz.

How many outputs does the HMPS have and what are their ratings?

It provides 2 outputs at 12 VDC each, with a current capacity of 2 Amperes per output.

Does the HMPS have short circuit or overload protection?

Yes, it includes both short circuit and overload protection.

How do I install the HMPS unit?

Slide the HMPS into the far right side of an HMR rack. Connect the AC power cord and use the provided brown/black jumper to connect to HMMS or HMD units. Plug the AC cord into a surge-protected outlet.

Is the HMPS waterproof?

No, it is not waterproofed. To reduce risk of shock or damage, do not expose to rain or moisture.

What is the warranty period for the HMPS?

Holland Electronics warrants the HMPS for 5 years from the original purchase date against defects in workmanship and material.

How do I get warranty service?

Contact Holland Electronics at [phone] to obtain an RMA number before returning the unit. Shipping costs to the service center are the customer's responsibility.

What are the output regulation and ripple specifications?

Output regulation is 5% and ripple is 25 mV.

Can I use an extension cord with the HMPS?

No, to prevent electric shock, do not use an extension cord, receptacle, or other outlet unless the plug blades can be fully inserted.

What grounding requirements apply?

The installer must follow NEC Article 820-22 guidelines for proper grounding, connecting the cable ground to the building's grounding system near the cable entry point.

USER MANUAL HMPS Holland Electronics

HMPS SPECIFICATIONS:

AC INPUT: 95-240VAC (50-60Hz)

DC OUTPUT: 2@12VDC

OUTPUT CURRENT: 2 Ampere (Each of 2 outputs)

PROTECTION: Short Circuit & Overload

REGULATION: 5%

RIPPLE: 25mV

Installation Instructions

1. Slide HMPS unit into the far right side of the HMR rack.
2. Plug in AC power cord into the rear of the HMPS unit.
3. Plug in one end of brown and black wired jumper to rear of HMPS.
4. Connect the other end of brown and black wired jumper to HMMS or HMD unit to be powered.
5. Plug in one end of the AC power cord into the rear of the HMPS unit.
6. Connect the other end of the AC power into a surge protected 95-240 VAC source.

IMPORTANT!!

WARNING: Holland Electronics does NOT represent this product to be WATERPROOFED. To reduce risk of electrical shock, fire hazard, or damage to the unit, do not expose to rain or moisture.

CAUTION: To prevent electric shock, do not use this plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

NOTE TO INSTALLER: This reminder calls the system installer's attention to Article 820-22 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE

HOLLAND ELECTRONICS LLC LIMITED WARRANTY

Holland ELECTRONICS LLC, warrants that the product enclosed with this Limited Warranty statement will conform to the manufacturer's specifications and be free of defects in the workmanship and material for a period of five years (5) from the date of original purchase.

WARRANTY PROCEDURE:

If the product appears to be defective contact Holland Electronics LLC at [phone]. We will analyze the problem and offer solutions to prevent removing the unit from service. If the unit is to be returned for evaluation, you will be issued a Return Material Authorization (RMA) number.

Holland Electronics LLC will, at its option, repair or replace the defective unit, under warranty, without charge for parts or labor. This repair will be subject to charges if signs of tampering or misuse are detected. Incoming shipping costs will be the customer's responsibility. Returns will not be accepted without an RMA number.

The warranty and remedy provided above are exclusive and in lieu of all other express warranties and unless stated herein, any statements or representations made by any other person or firm are void. The duration of any implied warranties of merchantability or fitness for a particular purpose on this product shall be limited to the duration of the express warranty set fourth above. Except as provided in this written warranty, Holland Electronics LLC shall not be liable for any loss, inconvenience, or damage, including direct, special, incidental, or consequential damages, resulting from the use or inability to use this product, whether resulting from breach of warranty or any other legal theory.

Some states do not allow limitations on how long an implied warranty lasts and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation and exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

To arrange for Warranty Service: Call Holland Electronics LLC [phone]