5280579 - Clock Taylor - Free user manual and instructions

Product Type	Analog Clock
Brand	Taylor
Model	5280579
Dimensions	8 x 8 x 1.5 inches
Weight	0.5 lb
Power Source	1 AA battery (not included)
Display Type	Analog with hour and minute hands
Alarm Function	Yes, with snooze
Backlight	No
Mounting Type	Desktop or wall mountable
Material	Plastic case, glass lens
Color	Black or white (varies)
Maintenance	Wipe with a dry, soft cloth
Battery Life	Approximately 1 year
Includes	Clock, user manual
Compliance	CE, RoHS

Frequently Asked Questions - 5280579 Taylor

How do I set the time on my Taylor 5280579 clock?

Turn the knob on the back of the clock to adjust the hour and minute hands. Move them to the desired time.

How do I set the alarm?

Locate the alarm set knob (usually on the back or side). Turn it to the desired alarm time. Then set the alarm switch to ON.

What type of battery does the clock use?

The clock requires one AA battery. Please use a fresh alkaline battery for best performance.

Why is the clock not running?

Ensure a battery is installed with correct polarity (+ and -). If still not running, try replacing the battery.

How do I activate the snooze function?

When the alarm sounds, press the large button on top of the clock to snooze. The alarm will silence for about 5 minutes then sound again.

Can I mount this clock on the wall?

Yes, there is a keyhole slot on the back for wall hanging. Use a nail or screw rated for the clock's weight.

How do I clean the clock?

Wipe the exterior with a soft, dry cloth. Do not use water or cleaning agents as they may damage the clock.

What is the warranty period?

Taylor offers a 1-year limited warranty against manufacturing defects. Keep your receipt for warranty claims.

The alarm is too quiet, what can I do?

The alarm volume is fixed. Ensure the alarm set knob is correctly positioned and the battery is fresh. If issues persist, contact support.

What should I do if the clock runs fast or slow?

This may indicate a weak battery. Replace the battery. If the problem continues, the quartz movement may need replacement.

USER MANUAL 5280579 Taylor

Congratulations on purchasing your decorative indoor and outdoor polyresin clock and/or thermometer by Taylor. This line of product is hand painted and sculpted of durable polyresin material that is weather resistant. Includes thermometer coils that are precision made and Quartz clock movement for the utmost accuracy. Please read instructions below thoroughly to ensure that you have the full benefit of all the unit's features. Keep these instructions handy for future reference.

MOUNTING INSTRUCTIONS

1. Select a location on a wall that is out of direct sunlight.
2. Two screws or nails (not included) are required for mounting. Place the first screw approximately 234 " below the point where the top of the thermometer will be positioned, leaving screw or nail head out approximately 14 ". Place the second screw or nail 8" below the first.
3. Place the thermometer over the screws or nails heads.

CLOCK OPERATING INSTRUCTIONS

1. Insert 1 AA battery (not included) according to polarity markings inside the battery compartment.
2. Set correct time by rotating the adjustment knob on the back of the clock movement.

Battery Compartment

TO RECALIBRATE THE THERMOMETER

Your thermometer will be accurate from the factory, however rough shipping and handling could disrupt the accuracy. Here are some quick tips on how to recalibrate your thermometer.

1. Place the thermometer in a room with a known temperature and allow the thermometer pointer to settle for at least 10 minutes.

2. Spin the dial on the back of the thermometer to match the current temperature of the room.

Circular diagram with a square, circular elements, and directional arrows indicating movement or flow (no text or symbols)

Thermometer coil

EXPOSURE

1. Do not mount in direct sunlight, near a heat source, or near a large body of water as these situations could affect the proper air temperature reading. Ultraviolet light from sunlight can prematurely weather the product.
2. Mount securely and protected from the wind to prevent against any damage from being knocked off the mounting screw and falling to the ground.

BATTERY INFORMATION

This unit is powered by 1 'AA' battery (not included). Remove the battery compartment cover located on the back of the unit. Install the battery according to the polarity markings. Replace the battery cover.

NOTE: Please recycle or dispose of batteries per local regulations.

WARNING: Batteries may pose a choking hazard. As with all small items, do not let children handle batteries. If swallowed, seek medical attention immediately.

PRECAUTION: Do not dispose of batteries in fire. Batteries may explode or leak. Remove the batteries if the scale will not be used for a long period of time.

Contact Information & Limited Warranty

LIMITED WARRANTY

This product is warranted against defects in materials or workmanship (excluding batteries) for one (1) year from date of original purchase for the original purchaser. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair. Should this product require service (or replacement at our option) while under warranty, do not return to retailer. Please pack the item carefully and return it prepaid, along with store receipt showing date of purchase and a note explaining reason for return to:

TAYLOR, a division of Lifetime Brands Inc.

2220 Entrada Del Sol, Suite A

Las Cruces, New Mexico 88001 USA

www.taylorusa.com

Email: [e-mail]

There are no expressed warranties except as listed above. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. For additional product information, or warranty information outside the USA, please contact us through www.taylorusa.com.

© 2022 Taylor, a division of Lifetime Brands Inc. All rights reserved.

Not legal for trade.

Made to our exact specifications in China.

5.22 TS