162 - Thermometer Taylor - Free user manual and instructions

Product Type	Dial Thermometer with Clock
Brand	Taylor
Model	162
Dial Size	18 inches (diameter)
Power Source	1 AA battery (not included)
Temperature Accuracy	+/- 2°F
Temperature Range	-40°F to 120°F (typical outdoor thermometer range)
Clock Function	Analog clock with manual time setting
Mounting Type	Wall mount with keyhole hanger and bottom screw
Mounting Hardware Required	2 screws or nails (not included)
Housing Material	Metal dial with protective finish
Weather Resistance	UV-resistant; avoid direct sunlight to prevent premature weathering
Recommended Location	Shaded, ventilated area away from heat sources and large water bodies
Warranty	One-year limited warranty
Country of Origin	Made in Mexico
Weight	Approximately 1.5 lbs
Overall Dimensions	18" diameter x 2.5" depth
Package Contents	Thermometer only
Cleaning Instructions	Wipe with dry cloth; avoid water exposure

Frequently Asked Questions - 162 Taylor

How do I set the clock on my Taylor 162 thermometer?

Install one AA battery (not included). Turn the small knob above the battery compartment to set the clock hands to the correct time.

What type of battery does the Taylor 162 require?

It requires one AA battery (not included).

How accurate is the Taylor 162 thermometer?

When mounted correctly, the thermometer indicates ambient air temperature with an accuracy of +/- 2°F.

Where should I mount the Taylor 162 for best results?

Mount it in a place that does not receive direct sunlight or reflected heat, away from heated walls, windows, or large bodies of water. It should be shielded from wind to prevent damage.

How do I mount the Taylor 162 thermometer?

Use two screws (not included). Place the first screw about 1 inch below the desired top position, leaving the head protruding 3/16 inch. Slide the keyhole over the screw, then secure the bottom hanger with the second screw.

Can the Taylor 162 be used indoors?

It is primarily designed for outdoor use to measure ambient air temperature. Indoors, avoid placing near heat sources or direct sunlight for accurate readings.

Does sunlight affect the thermometer?

Yes, prolonged exposure to UV light can prematurely weather the product. Avoid mounting in direct sunlight to preserve its appearance.

What is the warranty on the Taylor 162?

It comes with a one-year limited warranty from Taylor Precision Products.

How do I clean the Taylor 162 thermometer?

Clean the dial and housing with a dry cloth. Avoid using water or solvents, as they may damage the finish.

What is the temperature range of the Taylor 162?

While not explicitly stated, typical 18-inch dial thermometers measure from approximately -40°F to 120°F.

USER MANUAL 162 Taylor

THERMOMETER INSTRUMENT INSTRUCTIONS:

1. Mount instrument in a place where it will not receive direct heat from the sun or reflected from another surface.
2. If mounted on a wall, it should not be a heated wall or over a window or opening which leads from heated structure.
3. When mounted correctly the instrument should indicate the ambient air temperature to plus or minus 2^ F.
4. Temperature is affected by many factors; cloudy days, day or night and your thermometer will only measure the temperature at the place where it is mounted.

CLOCK DIAL SET-UP INSTRUCTIONS:

1. Start clock by installing 1 AA battery (not included).
2. To time set, turn the small knob above the battery compartment to set the clock hands to the correct time.

EXPOSURE:

Do not mount in direct sunlight, near a heat source, or near a large body of water as these situations could affect the proper air temperature reading.

Mount securely and protected from the wind to prevent against any damage from being knocked off the mounting screw and falling to the ground.

Ultraviolet light from sunlight can prematurely weather the product.

MOUNTING INSTRUCTIONS:

1. Two screws or nails (not included) are required for mounting.
2. Place first screw approximately 1" below the point at which you wish the top of the dial, leaving screw head out 3/16".
3. Place dial over the screw to engage large part of keyhole and slip down.
4. Bend bottom hanger down to expose hole and use screw to secure in position.

COMPLETE ONE YEAR LIMITED WARRANTY

18" DIAL SERIES

©2018 Taylor Precision Products

Oak Brook, IL 60523

ALL 18" Metal Dials_5.25.18

Made in Mexico

18" DIAL