HC-8EDC - Sorbet maker Hatsuyuki - Free user manual and instructions

Product Type	Commercial Cube Ice Shaver
Brand	Hatsuyuki
Model	HC-8EDC
Dimensions (W x D x H)	13 5/16" x 15 1/4" x 17" (34 cm x 39 cm x 43 cm)
Weight	47 lbs (22 kg)
Power Supply	DC 12V, 16A, 190W (battery powered)
Shaving Capacity	6.0 lbs/min (2.8 kg/min)
Ice Hopper Capacity	70 pieces of 1" cubes or 50 pieces of 1 1/4" cubes
Ice Cube Requirement	1" to 1 1/4" cubes
Texture Adjustment	Blade adjustment knob for fine to coarse shaving
Overload Protection	Automatic shut-off with reset button
Safety Features	Lid safety switch, blade guard, caution against wet hands
Construction	Stainless steel and plastic components
Cleaning Method	Disassemble removable parts; wipe exterior with damp cloth
Blade Replacement	User-replaceable; requires disassembly of ice chute and cover
Included Accessories	Drip tray, extra blade, power source cable, drain hose
Intended Use	Commercial (restaurants, food service)
Lubrication	Not required
Maintenance	Regular cleaning of hopper and outlet; dispose of ice after use
Certifications	Not specified (likely CE, UL compliant)

Frequently Asked Questions - HC-8EDC Hatsuyuki

How do I adjust the ice texture?

Turn the blade adjustment knob clockwise for coarser shaving and counter-clockwise for finer shaving. Always adjust while the machine is running with ice in the hopper.

What if the motor stops during operation?

The unit has overload protection. Turn the power switch OFF, remove any foreign objects from the hopper, then press the reset button to restart.

How do I clean the ice shaver?

Disconnect power. Remove the ice chute, top cover, lid, water-seal cover, plastic rotary hopper, metal rotary wing, and shaving case. Wash parts in warm soapy water, dry thoroughly, and reassemble. Wipe exterior with a damp cloth.

How often should I change the blade?

Replace the blade when shaving performance declines or if the blade is dull. The frequency depends on usage, but regular inspection is recommended.

Can I use large ice blocks?

No, only use 1" to 1-1/4" cube ice. Large blocks can damage the machine or cause jamming.

Is the ice shaver safe for children?

This is a commercial machine and should be kept away from children. The blades are sharp and the electrical parts pose a shock risk.

What does the lid safety switch do?

The motor only runs when the lid is closed. Do not use the lid switch as a power switch; always use the main ON/OFF switch to stop the machine.

Can I operate the ice shaver outdoors?

No, operating the machine outdoors or in rain can cause electric shock. Keep it in a dry, stable location.

How do I replace the blade?

Disconnect power, remove the ice chute, then remove the two screws holding the blade. Install the new blade with the tip parallel to the opening and lettering visible. Reassemble in reverse order.

What electrical connection is required?

The machine operates on DC 12V, 16A, 190W. Connect to a suitable battery or DC power source. Do not use with AC power without proper conversion.

USER MANUAL HC-8EDC Hatsuyuki

Hatsuyuki

CUBE ICE

SHAVER

FOR SAFETY

* Before operating the machine, please read the following "Instructions for Safety" in the manual very carefully, and operate the machine correctly.
* Each instruction specified in the manual is very important for safety, so be sure to follow each instruction as specified.
* Attention marks and their meanings are as follows:

WARNING: Incorrect operation of machine is dangerous and can cause serious injury or death.

CAUTION: Incorrect operation of machine is dangerous and can cause injury of person or material damages.

(Note: "Material damages" means damages to buildings, furniture and effects, pets, etc.)

Examples of Mark/Pictograph:

Electric Shock

△ represents "CAUTION" (including danger and warning). The specific contents of caution are shown near the △ mark by pictograph or letters. The mark illustrated left represents "ELECTRIC SHOCK".

Do Not Disassemble:

∅ represents "PROHIBITED OPERATION". The specific contents of "Prohibited" are shown within or near this Ⓧ mark by pictograph or letters. The mark illustrated at left represents "DO NOT DISASSEMBLE".

Unplug:

● represents "ENFORCEMENT" (Things to do). The specific contents of "Enforcement" are shown within or near ● the mark by pictograph or letters. The mark illustrated at left represents "Unplug from outlet".

WARNING

** Do not operate the machine outside Operating the machine outside or in the rain will cause electric bleeding or electric shock.

** Do not install the machine in a damp or wet place It can cause electric bleeding or electric shock.

Simple line drawing of a fire extinguisher and a portable device on a table (no text or symbols)

** Do not install/place the machine close to any heating appliance

Never install/place the machine close to any heating appliance such as a gas burner.

It can cause melting and/or burning of plastic cover.

** This machine is for "COMMERCIAL USE"

Be sure to keep the machine away from children to avoid electric shock or injury.

** Do not pour water over the machine or immerse machine in water

It can cause a short circuit or electric shock, as well as rust and other water-related problems.

** Do not damage power supply cord

Never work on power cord and never pull, twist or bundle it. Do not place a heavy things on it. It can damage the power cord and can cause electric shock or fire.

Simple line drawing of a fire extinguisher with a battery and star-shaped fuse (no text or symbols)

** Do not touch any electrical parts (such as battery terminal or switch) with wet hands. It can cause electric shock.

Illustration of a battery connected to a hand holding a power cord with lightning bolts (no text or symbols)

** Do not open the inlet cover or put your hand into the ice hopper It is dangerous and can cause serious injury.

WARNING

** In the event of circuit breaker moving to "OFF" position, please contact the machine vendor. Switching breaker to "ON" position incorrectly or by force can cause electric shock or fire.

** Should accidents or irregular operation occur, TURN OFF the main switch and unplug from outlet. Immediately contact your machine vendor for a correct repairs. Continued operation of a faulty machine can/will cause electric shock or fire.

** For cleaning inside the ice hopper or changing blades, be sure to TURN OFF the main switch and always put on gloves while cleaning/changing blade works. Never touch blades directly. They are very sharp and can cause injury.

** Never try to disassemble or repair the machine by yourself. Always call a qualified technician. Incorrect repair will likely cause irregular operation or electric shock, fire or injury.

** Do not attempt to alter the machine in any way. It can cause electric shock or fire.

CAUTION

** Always install the machine on a stable and flat surface. Irregular or imperfect installation can cause the unit to tip or fall and is therefore dangerous.

** Install the machine in a location unaffected by occasional dripping of water. Melting ice will drip and can, therefore, drip onto things surrounding the machine.

** Keep the machine away from direct sunlight. It can cause a damage to plastic parts.

Simple line drawing of a prohibition symbol, a refrigerator with sun, and a ground surface (no text or labels)

** Do not introduce foreign substances into the unit such as spoons, buttons, toothpicks, etc. It may cause undue load on the motor, resulting in excessive motor heating or fire.

** Should the motor stop under operation, be sure to switch OFF and unplug the unit. Remove any obstacles (foreign substances such as spoons, buttons, toothpicks, etc.) from ice hopper.

** When cleaning, be sure to switch OFF and unplug the unit before doing so. Cleaning with the power or switch on is very dangerous and can cause electric shock or injury.

** Clean ice hopper before operation and keep always ice hopper/ice outlet clean. Otherwise it can cause growth of germs/bacterium and cause health troubles.

** Never use inflammable sprays near the machine and never place volatile or inflammable materials close to the machine. Sparks from the switch could possibly cause fire.

** After the day's business is finished, be sure to switch OFF and disconnect the unit to battery for safety.

** For disposal of a disused unit, please contact local disposal experts or the nearest vendor. Abandoned machines are dangerous. Treat blade on machine as a dangerous item when disposing machine.

** When you sell or give the machine to a 3rd party, make sure that this "OPERATION MANUAL" goes with the unit for safety and correct operation.

Operation

Manual

Scotch Tape

The purpose of this machine is to make shaved ice from ice cubes. Its principal design is based on 1" to 1-1/4" ice cubes.

Please be sure to observe the following to avoid electrical shock :

● Install machine on a sturdy, level and waterproof surface.
- Do not confuse terminals (plus and minus) and connect correctly.
- Keep water away from electrical portions of machine.

Attention

- When machine is not to be used for many hours, store it in a moisture-free spot after it has been completely dried.

Operating Instructions

1) Put desired amount of cube ice in top hopper and close the lid.

Note : Do not leave ice in hopper and shave out ice in hopper completely.

2) Turn blade adjustment knob counter clockwise until it comes to a stop.
3) Turn on the power switch.
4) Slowly turn the blade adjustment knob clockwise until proper ice consistency is reached.

Note : Motor starts only while the lid is closed.

For safe operation, please observe these precautions:

1) Turn on switch after closing lid.
2) Add ice cubes only when the power switch is OFF and after machine has completely stopped.
3) Ice cube level shall not exceed a line approximately 1^1/4 " below the top of the rotating hopper.
4) Load ice cubes evenly in hopper to avoid unnecessary vibration.
5) Do not use large blocks of ice.

■ To stop shaving

Turn off the power switch. Do not use the safety switch for power switch by opening / closing the lid. It could be a cause of problems.

Overload protection

The unit automatically shuts off power when the motor is overloaded. In this case, set the power switch to OFF and remove the cause before pushing the reset button.

Adjusting ice texture

For coarser shaving, turn blade adjustment knob clockwise. For finer shaving, turn the knob counter-clockwise.

Oiling

Lubrication is not necessary on this unit.

Shaving capacity

6.1 lbs./minute.

Ice cube requirements for 7 ounce portion:

● 11-12 1" cubes.
●8-9 1 ^1/4 " cubes.

Hopper capacity

●70 1" cubes.
- 50 1^1/4 cubes.

Cleaning

1) Disconnect power cord from battery. 2) Loosen the 2 white-headed screws securing the ice outlet chute. Push the chute toward the rear of the machine, so that screw heads line up with key-hole opening chute. Pull downward to remove.

3) Unscrew the 4 white-headed screws on the top cover and remove. Top cover cannot be removed unless lid is fully opened to stop position.

4) Pull out lid connecting shaft and remove lid.

5) Grip the clear plastic water-seal cover by its bottom edge and pull out and up to remove. If it is too tight to remove by hand, pry up carefully with slot-headed screwdriver.

6) Remove the screws which attach the clear plastic rotary hopper to the metal rotary hopper. Remove plastic rotary hopper.

7) Unscrew and remove the large nut which attaches metal rotary wing to the shaving case.

8) Lift metal rotary wing upward to remove.

9) Remove the 3 screws which fasten the conical shaving case and lift upward to remove.

10) Remove the 2 screws which attach shaver blade assembly, change blades.

Note : Insure that new blade tip is to the outside, so that the lettering "CHUBU --- JAPAN" is visible.

Line drawing of a hand pressing down on a square mechanical device with a circular top (no text or symbols)

Line drawing of a hand using a tool to press or install a cylindrical object (no text or symbols present)

11) Re-assemble parts in the reverse order of above.

Line drawing of a hand using a tool to clean or install a device (no text or symbols present)

Line drawing of a hand using a device to press or install a device (no text or symbols visible)

Illustration of hands connecting a coiled spring to a mechanical housing (no text or symbols)

Line drawing of a hand pressing down on a mechanical device with a circular component (no text or symbols)

Illustration of two hands operating a kitchen appliance with a lid (no text or symbols)

Changing Blades

1) Disconnect power cord from socket.

2) Loosen the 2 white-headed screws securing the ice outlet chute. Push chute toward the rear of the machine, so that the screw heads line up with key-hole openings in chute. Pull downward to remove.

3) Remove the 2 screws holding the blade and take out blade. Blade is sharp - BE CAREFUL!

4) Install new blade and tighten screws which hold blade in place. Insure that blade tip is parallel to the opening of the conical shaving case. Re-assemble parts in the reverse order of the above.

Hand using a handheld device to clean or install a machine (no text or symbols visible)

Technical line drawing of a mechanical lever assembly (no text or symbols)

blade holding the screws

Cleaning of The Exterior

Wipe with a clean dry, soft cloth. For heavy dirt, wipe with a cloth dampened with dish detergent diluted with warm water. Do not clean with harsh detergents, solvents, or abrasive cleaners.

Specifications

Dimension	135/16"(34cm)×151/4"(39cm)×17(43cm)(W×D×H)
Electrical	DC 12V 16A 190W
Shaving Capacity	6.0 lbs/minute (2.8kgs/minute)
Ice hopper Capacity	70 pcs of 1" cube ice (1"×1")
Weight	47 lbs (22kgs)

Accessories

Drip Tray	1
Extra Blade	1
Power Source Cable	1
Drain Hose	1