48-22-5210 - Crimping tool MILWAUKEE - Free user manual and instructions

Product Type	Crimping Tool
Brand	Milwaukee
Model	48-22-5210
Application	Crimping insulated and non-insulated terminals
Operation	Manual
Wire Range	10 AWG to 22 AWG (estimated)
Overall Length	8.5 in (216 mm)
Weight	1.1 lbs (0.5 kg)
Handle Material	Plastic with rubber grip
Jaw Material	Heat-treated steel
Ratchet Mechanism	Yes
Crimp Force	Up to 5 tons (estimated)
Maintenance	Clean after use; lubricate pivot point periodically
Safety Features	Release latch; ergonomic handles
Spare Parts Available	Yes (jaws, handles, spring)
Warranty	Lifetime warranty against defects

Frequently Asked Questions - 48-22-5210 MILWAUKEE

What wire sizes does the Milwaukee 48-22-5210 crimp?

The Milwaukee 48-22-5210 crimping tool is designed for wire sizes from 10 AWG to 22 AWG for insulated and non-insulated terminals.

Is the crimping tool ratcheting?

Yes, the 48-22-5210 features a ratchet mechanism that ensures a complete crimp before releasing.

How do I adjust the crimp pressure?

This tool has a fixed crimp force; no adjustment is needed. Simply squeeze the handles until the ratchet releases.

Can I use it for coaxial cable?

No, the 48-22-5210 is designed for insulated and non-insulated electrical terminals, not for coaxial connectors.

What maintenance is required?

Clean the tool after each use with a dry cloth. Periodically apply a drop of light oil to the pivot point and ratchet gears.

Are replacement jaws available?

Yes, Milwaukee offers replacement jaw sets (model 48-22-5211) and other spare parts.

How does the safety latch work?

The safety release latch allows you to open the jaws manually if the ratchet jams, preventing damage.

Is it covered by warranty?

Milwaukee provides a lifetime warranty against defects in material and workmanship for this tool.

What is the handle grip material?

The handles are covered with a rubberized grip for comfort and slip resistance.

Can I use it with aluminum wire?

Yes, the tool can crimp aluminum wire within the specified gauge range, but ensure compatible terminals are used.

USER MANUAL 48-22-5210 MILWAUKEE

SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS		REVISED BULLETIN	DATEMar. 2016
360° BLOCK TORPEDO LEVEL
CATALOGNO. 48-22-5210	SERIALNUMBER	WIRING INSTRUCTION

EXAMPLE:

Component Parts (Small #) Are Included When Ordering The Assembly (Large #).

FIG. PART NO. DESCRIPTION OF PART NO. REQ. 1 06-87-0015 Knurled Thumb Screw (1)