AT-NSP700TV - Pregnant Audio-Technica - Free user manual and instructions

Product Type	TV Speaker
Brand	Audio-Technica
Model	AT-NSP700TV
Dimensions (W x H x D)	400 x 100 x 80 mm
Weight	1.5 kg
Power Output	20W RMS
Frequency Response	80 Hz - 20 kHz
Impedance	8 ohms
Connectivity	RCA, 3.5mm audio input
Power Source	AC adapter (included)
Enclosure Type	Active (built-in amplifier)
Controls	Volume control on rear panel
Included Accessories	AC adapter, audio cable
Cleaning Instructions	Wipe with a soft, dry cloth
Safety Precautions	Avoid moisture, keep away from children under 3 years
Spare Parts Availability	Contact Audio-Technica customer support
Repair Information	Refer to authorized service center
General Notes	Designed for TV sound enhancement; place on stable surface

Frequently Asked Questions - AT-NSP700TV Audio-Technica

How do I connect the AT-NSP700TV to my TV?

Use the included audio cable to connect the speaker's 3.5mm or RCA input to your TV's audio output. Ensure the TV is set to external speaker mode.

What power source does the speaker use?

The speaker uses an AC adapter (included). Plug it into a standard wall outlet. Do not use a damaged adapter.

How do I clean the speaker?

Wipe the exterior with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners.

Can I mount the speaker on a wall?

The AT-NSP700TV is designed for tabletop use. Wall mounting is not supported. Place on a stable, flat surface.

What should I do if there is no sound?

Check the connections, ensure the speaker is powered on, and verify the TV's audio output is set correctly. Also check the volume level on both TV and speaker.

Is the speaker compatible with all TVs?

It works with most TVs that have a 3.5mm headphone jack or RCA audio output. For TVs with optical output, an external converter may be needed.

What is the warranty period?

Audio-Technica typically offers a 1-year limited warranty. Refer to the warranty card or contact support for details.

Can I connect a subwoofer to this speaker?

The AT-NSP700TV does not have a subwoofer output. It is a standalone speaker with built-in bass.

How do I adjust the volume?

Use the volume control knob on the rear panel of the speaker. You can also adjust volume from your TV remote.

Is the speaker remote control included?

No, the AT-NSP700TV does not come with a remote control. Volume and power are controlled manually on the speaker.

USER MANUAL AT-NSP700TV Audio-Technica

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "\_\_\_\_", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

Customer of Flowflow

Qualcomm and is product of Qualcomm Technologies, Inc., and/or its subsidiaries. Data norms are a trademark of Qualcomm Incorporated. Regulations in the United States and other economies. into a trademark of Qualcomm: Schering & Mahindone Ltd., registered in the United States and other economies.