953CB - Controller CHAMBERLAIN - Free user manual and instructions

Product Type	Garage Door Remote Control
Brand	Chamberlain
Model	953CB
Compatibility	Security+ garage door openers and light controls with orange learn button
Number of Buttons	3
Battery Type	3V2032 Lithium
Battery Life	Up to 5 years
Programming Method	Press and release learn button on motor unit, then press and hold remote button until motor unit light blinks
Code Erasure	Press and hold learn button on motor unit for 6 seconds until indicator light goes out
Light Control	Programmable to control opener lights separately from door
Visor Clip Included	Yes (part 29B137)
Manual Included	Yes (part 114A2107)
Battery Replacement	Pry open case with visor clip or screwdriver, insert battery positive side up
Safety Warning	Keep remote controls out of reach of children; activate door only when in sight and no obstructions
FCC Compliance	Tested to comply for home or office use
Customer Service	1-800-528-9131

Frequently Asked Questions - 953CB CHAMBERLAIN

How do I program the remote to my garage door opener?

Press and release the learn button on the motor unit (the indicator light glows for 30 seconds). Within 30 seconds, press and hold the button on the remote. Release when the motor unit light blinks or you hear two clicks.

How do I erase all codes from the motor unit memory?

Press and hold the learn button on the motor unit until the indicator light goes out (about 6 seconds). All previous codes are erased. Reprogram each remote you wish to use.

How do I replace the battery in the remote?

Pry open the case using the visor clip or a screwdriver. Insert the 3V2032 lithium battery positive side up. Dispose of old battery properly.

How long does the battery last?

The lithium battery should produce power for up to 5 years under normal use.

Can I program the remote to control the opener lights?

Yes. With the door closed, press and hold the remote button for light control, then press and hold the Light button on the door control, then press and hold the Lock button until the opener lights flash. Release all buttons. Test by pressing the remote button; lights should turn on/off without moving the door.

What should I do if the remote does not work?

First, check the battery and replace if needed. Verify the opener's learn button is compatible (orange button). If the remote still does not work, erase all codes and reprogram. If problems persist, contact customer service at 1-800-528-9131.

Is this remote compatible with my opener?

This remote is compatible with Security+ garage door openers and light controls that have an orange learn button. It is not compatible with older systems using dip switches.

Can I use this remote for multiple garage doors?

Yes, the additional push buttons can be programmed to activate other garage door openers or light controls. Simply repeat the programming steps for each button with the corresponding opener.

How do I dispose of the old battery?

Dispose of the old lithium battery properly according to local regulations. Do not incinerate or puncture. Keep away from children. If swallowed, immediately contact a doctor.

What safety precautions should I take when using the remote?

Always keep remote controls out of reach of children. Never permit children to operate or play with the remote. Activate the door only when it is in sight, properly adjusted, and free of obstructions. Always watch the door until completely closed.

USER MANUAL 953CB CHAMBERLAIN

For use with Security ^{+ ®} garage door openers and light controls that have an orange “learn” button. The code between the remote control and the receiver changes with each use, randomly accessing over a billion new codes.

The additional push buttons can also activate other garage door openers and/or light controls. (Instructions for programming light products are included with those accessories.)

Instructions Are Described and Illustrated Below

1. Press and release the "learn" button on the motor unit. The learn indicator light will glow steadily for 30 seconds.
2. Within 30 seconds, press and hold the button on the hand-held remote.
3. Release the button when the motor unit light blinks. It has learned the code. If light bulbs are not installed, two clicks will be heard.

To Erase All Codes From Motor Unit Memory

To deactivate any unwanted remote, first erase all codes:

Press and hold the "learn" button on motor unit until the learn indicator light goes out (approximately 6 seconds). All previous codes are now erased. Reprogram each remote or keyless entry you wish to use.

Replacement Parts

3V2032 Lithium battery .....10A20

Visor clip .....29B137

Owner's manual ....114A2107

Owner's manual - Spanish .....114A2107SP

WARNING

To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door:

• ALWAYS keep remote controls out of reach of children. NEVER permit children to operate, or play with remote control transmitters.
• Activate gate or door ONLY when it can be seen clearly, is properly adjusted, and there are no obstructions to door travel.
• ALWAYS keep gate or garage door in sight until completely closed. NEVER permit anyone to cross path of moving gate or door.

To Control the Opener Lights

In addition to operating the door, you may program the remote to operate the lights.

1. With the door closed, press and hold the remote button that you want to control the light.
2. Press and hold the Light button on the door control.
3. Press and hold the Lock button on the door control.
4. After the opener lights flash, release all buttons.

Test by pressing the remote push button. The opener lights should turn on or off but the door should not move.

The Remote Control Batteries

WARNING

To prevent possible SERIOUS INJURY or DEATH:

• NEVER allow small children near batteries.
• If battery is swallowed, immediately notify doctor.

The lithium batteries should produce power for up to 5 years. To replace, pry open case with visor clip or screwdriver, as shown. Insert batteries positive side up (+).

Dispose of old batteries properly.

NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.

Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FOR SERVICE DIAL OUR TOLL FREE NUMBER: 1-800-528-9131