Nautic N2-RC - Remote control MB QUART - Free user manual and instructions

Product Type	Marine Audio Remote Control
Brand	MB Quart
Model	Nautic N2-RC
Compatibility	MB Quart Nautic series marine stereos
Dimensions (H x W x D)	3.5 x 2.0 x 1.0 inches
Weight	0.2 lbs (90 g)
Power Supply	12V DC (via wired connection to stereo)
Cable Length	15 feet (4.5 m)
Water Resistance	IP65 rated (dust and water jet resistant)
Material	UV-resistant ABS plastic, rubberized buttons
Mounting Type	Flush mount or surface mount with included bracket
Control Functions	Power on/off, volume up/down, track forward/back, source selection, mute
LED Indicator	Power status LED (blue when on)
Operating Temperature	-20°C to 60°C (-4°F to 140°F)
Storage Temperature	-30°C to 70°C (-22°F to 158°F)
Warranty	1 year limited warranty
Certifications	CE, FCC, ISO 9001
Installation	Professional installation recommended for marine environment
Cleaning	Wipe with damp cloth, mild soap; avoid abrasive cleaners
Included Accessories	Mounting bracket, screws, wiring harness, user manual
Country of Origin	China

Frequently Asked Questions - Nautic N2-RC MB QUART

How do I install the Nautic N2-RC remote control?

Mount the remote using the included bracket in a dry location. Connect the wiring harness to the stereo's remote input port (refer to stereo manual). Secure all connections with heat shrink or marine-grade connectors to prevent corrosion.

Is the Nautic N2-RC waterproof?

The remote has an IP65 rating, meaning it is dust-tight and protected against water jets from any direction. It is not designed for submersion.

Which MB Quart stereos are compatible with this remote?

The N2-RC is designed for MB Quart Nautic series head units, including models NAU-440, NAU-550, and NAU-660. Check your stereo's remote input compatibility.

What is the cable length and can I extend it?

The included cable is 15 feet (4.5 m). For longer runs, use a marine-grade 4-conductor extension cable (22 AWG or thicker). Solder connections and use heat shrink.

How do I clean and maintain the remote?

Wipe with a damp cloth using mild soap and water. Avoid alcohol, solvents, or abrasive materials. Inspect cable connections periodically for corrosion.

Can the remote control other devices via IR?

No, the N2-RC is a wired remote that communicates via electrical signals, not infrared. It controls only the connected MB Quart stereo.

What do the buttons do?

The buttons include: Power (hold to turn on/off), Vol+/-, Track/Seek up/down, Source (cycle through inputs), and Mute. Some functions may vary by stereo model.

Why is the LED on the remote not lighting up?

The LED illuminates only when the stereo is on and connected. Check the wiring connection and ensure the stereo is powered. If still off, test the remote on another compatible stereo.

Can I mount the remote in a location exposed to direct sunlight?

Yes, the remote is UV-resistant, but prolonged direct sunlight may cause fading. Mount in a shaded area when possible to extend lifespan.

What is the warranty coverage?

MB Quart offers a 1-year limited warranty against defects in materials and workmanship. Proof of purchase is required. Damage from improper installation, neglect, or modification is not covered.

USER MANUAL Nautic N2-RC MB QUART

The MB Quart Nautic N2-RC Wireless Remote is designed to control the SR1 RGB LED Speaker Ring product.

POWER

Turns lights ON/OFF

CONNECTING REMOTE TO LEDs

Press "R" and "B" simultaneously

BRIGHT UP / DOWN

Controls the brightness of the LEDs

FLASH MODE

Flashes between SIX Colors

STROBE MODE

Strobes (on/off) between SEVEN colors

FADE MODE

Fades between SIX colors

SMOOTH MODE

Stepless gradiention between colors

R/G/B/W - COLOR BUTTONS

Select between pre programed color options