ET-913SFP V2 - Audio/video converter Edimax - Free user manual and instructions

Product Type	Media Converter (10/100/1000Base-T to 1000Base-SX/LX SFP)
Model	ET-913SFP V2
Brand	Edimax
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x
Ports	1 x RJ-45 (10/100/1000Base-T), 1 x SFP slot (1000Base-SX/LX)
Jumbo Frame Support	Up to 9.6 KB
Data Transfer Rate	2000 Mbps (Full-Duplex)
Transmission Media (Copper)	Cat 3, 4, 5, 5e, 6 UTP/STP (up to 100m)
Transmission Media (Fiber)	Multimode 50/125μm or 62.5/125μm, Single-mode 9/125μm
Fiber Distance	Up to 550m (multimode) / 10-60km (single-mode) with appropriate SFP
LED Indicators	TX Link, FX Link, RX (per port), Power (per unit)
Power Input	DC 5V, 2A
Power Consumption	10W max
Dimensions (L x W x H)	102 x 74 x 26 mm (approx.)
Weight	240 g
Operating Temperature	0 to 45°C
Storage Temperature	-20 to 90°C
Humidity	10% to 90% (non-condensing)
Certifications	FCC Class B, CE
Key Features	Fiber Link Alarm, Voltage Supervisor, Auto-reset on power drop below 2.9V
Included Accessories	Power adapter, User manual
Cleaning	Wipe with a dry, soft cloth. Do not use liquids or solvents.
Maintenance	No user-serviceable parts. Contact support for issues.
Safety	Use only the provided power supply. Avoid water, heat, and physical damage.
Repairability	Not repairable by user. Contact Edimax support for service.

Frequently Asked Questions - ET-913SFP V2 Edimax

What is the Edimax ET-913SFP V2 used for?

It is a media converter that converts signals between copper (RJ-45) and fiber optic (SFP) networks, allowing you to extend network distances up to 60 km with single-mode fiber.

How do I connect the ET-913SFP V2?

Connect your copper device (e.g., switch or workstation) to the RJ-45 port using a standard Ethernet cable. Insert a compatible SFP module into the SFP slot and connect the fiber cable. Then plug in the DC power adapter.

What SFP modules are compatible?

The device supports 1000Base-SX/LX SFP modules. For multimode use a 1000Base-SX SFP, for single-mode use a 1000Base-LX SFP. The distance depends on the SFP module (e.g., 550m for multimode, up to 60km for single-mode).

Does it support 10/100 Mbps speeds?

Yes, the RJ-45 port is auto-negotiating and supports 10/100/1000Base-T. The fiber side operates at 1000Base-SX/LX only (1000 Mbps).

What is the maximum fiber distance?

With an appropriate SFP module, the device can transmit up to 550m on multimode fiber and 10 to 60 km on single-mode fiber (depending on the SFP model). The actual distance also depends on fiber quality and connectors.

Does it support jumbo frames?

Yes, it supports jumbo frames up to 9.6 KB, which can improve network efficiency for large data transfers.

How can I monitor the link status?

The device has LED indicators: Per port (TX Link, FX Link, RX) and per unit (Power). The Fiber Link Alarm feature helps monitor critical fiber links by signaling if the fiber link is down.

What should I do if the device is not working?

First, check the power adapter (DC 5V, 2A) and ensure it is plugged in. Verify cable connections are secure and the SFP module is properly inserted. Check if the LEDs indicate a link. If the problem persists, try a different cable or SFP module, or contact Edimax support.

Is the device plug-and-play?

Yes, it is plug-and-play with no configuration required. It auto-negotiates speed and duplex on the RJ-45 port. Simply connect cables and power on.

What are the power requirements?

The device requires a DC 5V, 2A power supply (included). The maximum power consumption is 10W. Use only the supplied adapter to avoid damage.

USER MANUAL ET-913SFP V2 Edimax

Best media conversion solutions for network connectivity

Edimax's full series of Media Converter are designed to meet the needs for massive optical fiber network, provide the whole Gigabit Ethernet network implementation.

Migrating between copper and fiber-based Medium

ET-913+ series convert the signals between two different transmission medium, allowing user a simple and cost-effective method to migrate between UTP cable and fiber optic cable. It can transmit signals up to 550m (multimode) and 10/20/30/60km (single-mode) in fiber medium, allowing users to extend network.

Comply with IEEE Standards

ET-913+ series are fully compliant with IEEE 802.3/u/ab 10/100/1000Base-T and 802.3z 1000Base-SX/LX standards. The device comes with one RJ-45 port to connect to a 10/100/1000Base-T device such as workstation or switch and one fiber connection to connect a 1000Base-SX/LX device.

Feature LED and Fiber link alarm

User could monitor the device through Feature LED. In addition, Fiber Link Alarm could allow user to monitor and maintain their critical fiber link more effectively.

Unique voltage supervisor

Built in voltage supervisor IC will automatically reset all chipsets in converter as power voltage drop below 2.9V, this action can make sure fiber port and TP port work normally when thunder storm or power unstable occurring

Order Information

Model Optical Fiber Description
ET-913MSC+ V2	10/100/1000T to 1000SX Multi Mode 550M-SC
ET-913SSC1+ V2	10/100/1000T to 1000LX Single Mode 10KM-SC
ET-913SSC2+ V2	10/100/1000T to 1000LX Single Mode 20KM-SC
ET-913SSC3+ V2	10/100/1000T to 1000LX Single Mode 30KM-SC
ET-913SSC5+ V2	10/100/1000T to 1000LX Single Mode 50KM-SC
ET-913SSC6+ V2	10/100/1000T to 1000LX Single Mode 60KM-SC
ET-913SSC8+ V2	10/100/1000T to 1000LX Single Mode 80KM-SC
ET-913SW2A+ V2	WDM 10/100/1000 to 1000 Single Mode 20KM-A
ET-913SW2B+ V2	WDM 10/100/1000 to 1000 Single Mode 20KM-B
ET-913SW4A+ V2	WDM10/100/ 1000 to 1000 Single Mode 40KM-A
ET-913SW4B+ V2	WDM 10/100/1000 to 1000 Single Mode 40KM-B
ET-913SFP V2	10/100/1000T to 1000 SFP Media Converter

Specification

Standards	IEEE802.3 10BaseTIEEE802.3u 100BaseTXIEEE 802.3ab 1000BaseTIEEE 802.3z 1000BaseSX/LXIEEE 802.3x Flow Control
Features	Number of Ports:1 * 10/100/1000BaseT with RJ-45 Connector1 * 1000BaseSX/LX with Fiber Connector(Mul/Single Mode)Jumbo Frames: 9.6 KB
DataTransferRate	2000Mbps/Full-Duplex
TransmissionMedia	TP:10BaseT Cat. 3, 4, 5 UTP/STP100BaseTX Cat. 5 UTP/STP1000BaseT Cat. 5, 5E, 6 UTP/STP, up to1000BaseSX:50/125μm Mul Mode Fiber opc cable, up to62.5/125μm Mul Mode Fiber opc cable, up to1000BaseLX:9/125μm Single Mode Fiber opc cable
LEDIndicators	Per Port:(TX): Link, TX(FX): Link, RXPer Unit: Power
PowerRequirement	DC5V/2A
PowerConsumpon	10 Was (Max)
Dimensions	102 x 74 x (L x W x H)
Weight	240g
OperangTemperature	0 to 45°C
StorageTemperature	-20 to 90°C
Humidity	10 to 90% RH (non-condensing)
Cercaons	FCC Class B, CE