925-1418 - Accessoire pour capteur météo LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free 925-1418 LA CROSSE TECHNOLOGY in PDF.
| Product Type | Sensor Weather Shield |
| Brand | La Crosse Technology |
| Model | 925-1418 |
| Dimensions (H x W x D) | 7.00 x 3.73 x 3.98 inches (177.8 x 94.74 x 101.9 mm) |
| Weight | Approximately 0.3 lb (136 g) |
| Material | White plastic |
| Color | White |
| Protection Type | Rain, snow, limited sun protection |
| Mounting Options | Flat surface, wall, or post |
| Included Accessories | Screws, zip ties, Velcro tape |
| Compatibility | La Crosse temperature, temperature/humidity, and probe sensors (sensor not included) |
| Warranty | 1-year limited warranty |
| Manufacturer | La Crosse Technology, Ltd. |
| Care Instructions | Wipe with dry cloth; avoid harsh chemicals |
Frequently Asked Questions - 925-1418 LA CROSSE TECHNOLOGY
User questions about 925-1418 LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Accessoire pour capteur météo in PDF format for free! Find your manual 925-1418 - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 925-1418 by LA CROSSE TECHNOLOGY.
USER MANUAL 925-1418 LA CROSSE TECHNOLOGY
natural_image
White plastic cylindrical container with multiple horizontal grooves and a side panel extending from its side (no text or symbols visible)The Sensor Weather Shield is designed to protect your outdoor sensors from rain and snow. This shield will offer limited protection from the sun's heat.
• Temperature sensor
• Temperature/Humidity sensor
- Probe sensor
Model: 925-1418
DC: 021318
If you have a sensor with a probe wire, there is a hole for the probe to exit.
Note: Sensor and probe are not included
INSERT SENSOR (not included)
- Twist the cover clockwise to remove the base.
- Attach the Velcro tape to the sensor and to the upright on the base. This keeps the sensor from tipping.
• Alternately, secure the sensor with a zip tie. - With a probe sensor, be sure the probe wire fits through the round hole in the base.
- Place cover over sensor and base. Twist counter clockwise to lock into place. Sensor must fit entirely in the sensor shield to be protected.
- Mount the sensor shield so that the sensor is in range of the display.
MOUNT SENSOR SHIELD
Mount to a flat surface:
- Twist the cover clockwise to remove the base.
- Place one long screw through the center hole of the base.
- Tighten until the head of the screw is flat with the base. Do not over tighten.
Mount to a wall or post:
- Slide the mounting bracket down and remove from the cover.
• Take note of the UP ARROW on the back of the bracket.
• Find a shaded location and attach the bracket (arrow UP) with the four screws (included), or with the two zip ties (included).
Note: Allow room to slide cover onto bracket.
- Slide the shield down onto the bracket.
DIMENSIONS: 7.00" H x 3.73" W x 3.98" D (177.8 x 94.74 x 101.9 mm)
WARRANTY & SUPPORT
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship.
For Full Warranty Details and online support, Visit: www.lacrossetechnology.com/support
For warranty work, technical support or other information contact out friendly support staff:
La Crosse Technology, Ltd
2830 South 26th St
La Crosse, WI 54601
Contact Support: 1-608-782-1610
Brand : LA CROSSE TECHNOLOGY
Model : 925-1418
Category : Accessoire pour capteur météo