ITH91 - Forehead thermometer Conair - Free user manual and instructions

Product Type	Non-contact infrared forehead thermometer
Model	ITH91
Brand	Conair
Measurement Range	32.0°C – 42.2°C (89.6°F – 108.0°F)
Accuracy	±0.2°C (±0.4°F) within 35.0–42.0°C (95.0–107.6°F)
Measurement Distance	1–5 cm (0.4–2.0 inches) from forehead
Response Time	Approximately 1 second
Display	LCD screen with backlight
Memory	Last 10 readings stored automatically
Unit Switch	Celsius / Fahrenheit selectable
Power Source	2 x AAA alkaline batteries (not included)
Auto Power Off	After approximately 30 seconds of inactivity
Dimensions	Approx. 5.5 x 3.5 x 1.5 inches (14 x 9 x 4 cm)
Weight	Approx. 100 g (3.5 oz) including batteries
Operating Temperature	10°C – 40°C (50°F – 104°F)
Storage Temperature	-20°C – 55°C (-4°F – 131°F)
Material	ABS plastic
Cleaning	Wipe sensor window and body with a soft, dry cloth or alcohol swab
Safety	Not a medical device; for home use only. Do not immerse in water.
Repairability	No user-serviceable parts; do not disassemble
Included Accessories	User manual, storage pouch

Frequently Asked Questions - ITH91 Conair

How do I switch between Celsius and Fahrenheit?

When the thermometer is off, press and hold the Start button for about 3 seconds until the display shows a flashing unit. Press again to toggle between °C and °F. Wait 5 seconds to confirm.

What is the correct distance to hold the thermometer from the forehead?

Hold the thermometer 1 to 5 cm (0.4 to 2 inches) away from the center of the forehead. Do not touch the skin.

Why does the thermometer show different readings each time?

Normal variations can occur due to factors like sweating, movement, or incorrect positioning. Ensure the forehead is clean and dry, and take multiple readings at the same spot. Use the average of three consistent readings for accuracy.

How do I clean the thermometer?

Clean the sensor lens and body with a soft dry cloth or alcohol swab. Do not use abrasive cleaners or submerge in water. Allow to dry completely before use.

What batteries does the ITH91 use and how do I replace them?

The thermometer requires 2 x AAA alkaline batteries. Open the battery compartment on the bottom, insert the batteries with correct polarity (+/-), and close the cover. Replace when the battery icon blinks.

Can I use the thermometer on a baby?

Yes, the thermometer is safe for infants and children. Ensure the child is calm and the forehead is free of moisture. For accurate results, wait 10 minutes after bathing or feeding.

What does the 'Lo' message mean?

'Lo' indicates the measured temperature is below 32.0°C (89.6°F). This may happen if the ambient temperature is too cold or the device is not in contact with skin correctly. Move to a warmer environment and try again.

How do I recall previous readings?

When the thermometer is off, press the Start button once to turn it on. Then press the Memory button (usually marked M) to scroll through the last 10 stored readings. The oldest reading is displayed first.

Is the Conair ITH91 a medical device?

No, this thermometer is intended for home use as a general temperature screening tool. It does not replace professional medical thermometers. Consult a doctor for medical decisions.

What should I do if the thermometer does not turn on?

First, check the batteries for correct polarity and replace them if needed. If the device still does not power on, clean the battery contacts with a dry cloth. If the problem persists, contact Conair customer support.

USER MANUAL ITH91 Conair

Thank you for purchasing the ConairCare Infrared Forehead Thermometer (ITH91). This product features the latest technology and has been tested according to international medical device standards. It has been cleared by the FDA for home and professional use. The thermometer's unique technology enables stable and accurate measurements every time. This product is designed specifically to monitor body temperature for use at home or in clinical settings.

Please read the instruction manual carefully and keep it in a safe place for reference.

INDICATIONS FOR USE The ITH91 is a non-sterile, reusable, clinical electronic thermometer using an infrared sensor to detect human body temperature on people of all ages for home and professional use.

WARNINGS & PRECAUTIONS Never use the thermometer for purpose other than

The use of the thermometer is not intended as a substitute for a consultation with your healthcare provider. It is important about your health, please see your physician. Elevated temperature may signal a serious illness, especially in older individuals, people with compromised immune systems, and infants. In order to properly diagnose an elevated temperature it is important to know an individual's normal body temperature. We suggest taking several readings when the person is healthy, to set a baseline for their normal temperature. Infrared thermometers cannot be used to diagnose COVID-19 or other illnesses. Infrared thermometers can identify individuals with higher than average body temperatures compared to a sample population. Only a medical professional can determine whether an individual is experiencing an abnormal medical condition or illness.

Note that an abnormal medical condition may be present even when an individual does not show a fever. When in doubt, consult your physician.

Follow general safety guidelines when using this thermometer on children. Do not allow children to take their temperature unattended. This is not a toy. Do not use this thermometer on children less than 3 months of age.

Do not immerse this thermometer in water or other liquids. Follow the instructions in the "Cleaning and Maintenance" section to clean and disinfect the thermometer.

The device is made of precision parts. Do not dismantle, re-assemble or modify the thermometer in any way. Do not drop the thermometer and protect it from strong impacts.

Do not use this thermometer if the sensor is broken. If the device is broken, do not attempt to repair it yourself. Contact the customer service center. Do not use this thermometer in the presence of flammable anesthetic mixtures with air or with oxygen or nitrous oxide.

CAUTION

Keep the device away from direct sunlight, store in a dry and dust-free environment, ideally within a storage temperature range of 4°F to 131°F (-20°C to 55°C). Before taking temperature readings, please make sure the sensor surface is clean. If there is visible dust or dirt, you may clean the surface with a cotton swab dipped in rubbing alcohol before using the device. After cleaning the sensor head with alcohol, it is recommended to leave the device for a few minutes until the alcohol evaporate and the sensor head returns to its normal temperature. We suggest cleaning the thermometer sensor after each use, to ensure measurement accuracy and to avoid potential cross-contamination.

To make sure the measurement result is accurate, wait at least 30 seconds after each measurement before you measure again.

Because babies are slower at adapting to temperature changes in the environment, if drastic temperature changes are observed, it is best to wait a few minutes

in the same environment, until the baby's body temperature becomes stable, before taking any temperature readings to ensure the most accurate results. It is recommended to take 3 temperature readings and reference the highest recorded measurement for

and restriction and highest resolution measurement for babies between 3 months to 3 years of age, or for first-time users of the device. Do not add a protective sleeve to the sensor, as that may affect the occurrence of the measurement

The device requires no calibration. Remove batteries if the equipment is not likely to be used for some time.

The user must check that the equipment functions safely and see that it is in proper working condition before use.

Do not operate the product out of operating condition or out of the operating temperature range, as it may cause measurement value anomalies or malfunction.

HOW THE THERMOMETER WORKS This thermometer detects infrared energy radiated from the skin and tissue of the forehead. This thermometer has been tested and proven to be safe and accurate when used as directed in this instruction manual. This device has settings that alert you to a temperature above normal.

Normal temperature varies from person to person, by age, and even by time of day and activity. It is best to establish a "normal" temperature range for each use of the thermometer while the person is feeling well. We suggest taking readings in the morning and in the late afternoon, and averaging them to get a "normal" temperature. Record that temperature so you can use it to compare against temperatures measured for that person when they are not feeling well. Note that normal body temperatures tend to decrease with age.

The ConairCare Thermometer features a temperature alert setting: It will vibrate to alert you to a low-grade and also to a high-grade fever.

Generally, temperatures in the range of 96.4°F - 99.4°F (35.8°C - 37.4°C) are considered normal; a temperatures between 99.5°F - 101.3°F (37.5°C - 38.5°C) are considered a light fever and temperatures over 101.3°F (38.5°C) are considered a high-grade fever.

GETTING TO KNOW YOUR THERMOMETER

SETTING UP YOUR THERMOMETER

Push the power button on the thermometer to turn on the device. If the thermometer display does not light up, open the battery door on the bottom of the handle and make sure the batteries are correctly installed with respect to polarity. Close the battery door and press the button again. The display will light up.

Selecting temperature units With the thermometer turned off, press and hold the power button for 5 seconds. The thermometer will display --- °C. Then press the power button again to switch to °F.

BEFORE TAKING A TEMPERATURE READING

TELETRATURE READING Clean the skin of the forehead and make sure the area is free of hair, sweat, lotion or makeup. Wait at least 30 minutes after strenuous exercise to take your temperature.

Take the temperature in a room that does not have significant changes in airflow, such as a room with large fans and air conditioners. Do not take your temperature near heat sources, such as radiators or heat registers.

The body's temperature adapts to the environment. Allow at least 20 minutes to adjust to room temperature if a person is entering a room that is significantly warmer or cooler than the room they were in previously.

MEASURING FOREHEAD TEMPERATURE

Simply press the power button to turn on the device. After about 2 seconds, the dot matrix screen displays "FOR" and the previously chosen unit of temperature (F or °C).

To take the temperature, gently touch the user's fore-

head with the front of the cap: Aim at the center of the forehead, between and slightly above the eyebrows. Press the power button. The thermometer will vibrate gently to indicate that the measurement is complete, and the temperature will display on the thermometer. The device will automatically shut down after 30 seconds.

FEVER ALERTS

When the measured temperature exceeds a preset level, the thermometer will vibrate to alert you to a fever.

1. Low-level fever When a low-level fever is detected (99.0°F-99.3°F or 37.2°C-37.4°C), the thermometer will vibrate twice, with the display flashing at 1-second intervals.
2. High-level fever

When a higher-grade fever is detected (99.5°F/37.5°C or above), the device will vibrate three times, with the display flashing at half-second intervals.

STORED READING RECALL

From the device on, when the thermometer in Saturday mode (display shows "FOR"), press and hold the power button for about 4 seconds. The display will show FOR. The recorded readings will display. The device can record up to 12 readings.

AUTOMATIC SHUTDOWN This thermometer is equipped with a battery-saving automatic shutdown feature: After 30 seconds without any user action, the thermometer will power down. You can turn it back on by simply pushing the power button on the handle.

BATTERY REPLACEMENT This product uses 2 AAA alkaline batteries (included). When the display shows "LOL" it indicates that the batteries are low and need to be replaced. To replace the batteries, push the battery cover on the bottom of the handle in the direction of the arrow. Take out the old batteries and install the new batteries, making sure the polarity is correct (note the "+" and "-" signs). Close the battery door and properly dispose of the batteries. If the thermometer is not used for more than 3 months, remove the batteries to prevent potential damage from battery fluid.

BATTERY SAFETY

1. This product requires 2 AAA batteries.

2. Since batteries are sensitive to high temperatures, keep them in a cool, dry place when storing them.

3. Battery contacts need to be clean, both on the battery and in the appliance, before installation

4. Batteries should be removed from the appliance when not being used for long periods of time (months).

5. Never recharge non-rechargeable batteries.

6. Be careful to install (+) and (-) to the correct plus and minus on device.

7. Replace all old batteries at one time. Do not mix old and new.

8. Remove discharged batteries immediately to

9. Never put batteries into a fire.

10. Switch off devices after use

11. Keep batteries away from children, especially the batteries that are small enough to ingest.

12. If a battery is ingested, seek immediate

medical help.

1. Never open, crush, puncture or disassemble batteries.

2. Dispose of batteries according to any state and local regulations.

3. Do not dispose of rechargeable batteries as solid waste.

CLEANING AND MAINTENANCE

Check whether the battery level is sufficient before each use. If the battery is low (display shows "LOL").

change the batteries and then take the temperature. Before each use, check the equipment casing for damage. If it is damaged, do not use. The sensor

Head is the most important part of the thermometer, and the front part (sensor mirror) is fragile. Be careful not to damage the sensor when you clean it.

Wipe with a soft, dry cloth after each use. If the thermometer is dirty, you may wipe the unit with a damp cloth moistened with water or neutral detriment, and then wipe it with a dry cloth. Avqi

desgent, and then improve it with dry stores. Water entering the body of the thermometer, so that the internal electronic components do not get damaged.

If you are concerned about contamination, you may clean the thermometer with 75% alcohol before and after use. Use only a small amount of alcohol:

Excessive amounts of alcohol can damage the electronics of the device. Do not use volatile oil, paint thinner, and other

DISPLAY INDICATORS
AND TROUBLESHOOTING

LED INDICATOR	STATUS	WARNING	WARNING indicates a hazardous situation which is found, could result in death or stroke injury
Full display	Shows during lock-up and in self-test mode	CAUTION	CAUTION indicates a hazardous situation which is found, could result in error or moderate injury
Standby (display reads "For F")	Indicates thermometer is in standby mode	NOTICE	NOTICE addresses practices not linked to personal injuries, such as product and/or property damage
H	"High" The measured temperature exceeds the measurement range	A	Type EF
L	"Low" The measured temperature exceeds the measurement range	DO	Do not dispose of this product in marginal water. Defined with some quantities necessary for special treatment is necessary
EH	The standard temperature is too high to get an accurate reading	IP22	Refer to instruction manual/basket
EL	The standard temperature is too low to get an accurate reading	Manufacturer
Er	Sensor error: please call customer service	SN	Serial number
Display shows LO, time for 10 seconds, then turns of	Low battery	↑	The package should be protected from rain
		↑	The package contains fragile products, please handle with care

CLASSIFICATION
• Internally powered equipment
- Type BF applied part: Probe
• IP22
• Not category AP / APG equipment
• Mode of operation: continuous operation

PRODUCT SPECIFICATIONSKEY TO SYMBOLIES'S DECLARATION OF CONFORMITY

Product name: Thermometer
Product No.: TE-91
Measurement range: 32.0°C ~43.0°C (89.6°F ~ 109.4°F)
Residual cost:0.1°C/0.1°F
Unit: °C/F (default unit is °F)
Measurement time:	1S
Interval measurement time:	3S
Operating voltage: DC 3.0V
Low battery parameters:	2.5c±0.15V
Working current: <60mA
Standby current: <25mA
Working environment: Temperature: 10°C ~ 40°CRelative humidity: ≤8% RH
Storage environment: Temperature: -20°C ~ +55°CRelative humidity: ≤30% RH
Battery: ≥2mA
Expected service life: Five years from the date of production

Brand: Conair

Model No.: ITH91

Description: Infrared Forehead Thermometer

Responsible Party: Conair Corporation, 1 Cummings Point Road, Stamford, CT 06902

203-351-9000

Standards: FCC Part 15 Subpart B, ANSI O63.4-2014

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Date of issue: April 22, 2020

FCC MARKINGS:This device complies with Part 15 of the FCC Rules. This device is not a suitable interface for (i) This device may not cause harmful interference; (ii) This device must accept any interference received, including interference that may cause undesired interference.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, which is designed to be suitable for all devices. These causes are designed to provide reasonable protection against harmful interference in a residential installation. This device is designed to be suitable for all devices, but it is also a frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference or damage. The equipment is also guaranteed that interference will not occur in a suitable application. This device is not a harmful interference to radio or television reception, which can be determined by turning the equipment between radio and television, which is intended to connect the interference by one or more of the following measures:

LIMITED THREE-YEAR WARRANTY

(U.S. AND CANADA ONLY)

Consain will report or replace (at our option) your unit free of charge to 30 days from the date of publication, effective in workmanship or materials.

To obtain senior under this warranty, return the property shall be sold for any reason, together with your purchase receipt. California residents need only provide proof of purchase and should call for a purchase. If you are not willing to pay for any reason, it is false, and the absence of a purchase request, the warranty period shall be 30 months from the date of publication.

ANY RELATED WARRANTY OF THE PROVISIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED THE IMPELLY WARRANTY OF RESOURCES, IN ACCORDANCE WITH ANY PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 36-MONITOR END OF THIS ORDER, EXCEPT, AS PROVIDED BY: Some states do not allow limitations on how applicable provisions of this offer shall be applied. The above limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR OTHER, OTHERS, PATENTALS, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATRICAL, PATR.)

Better model number TE-91

aw

Shenzhen Better Health Measurement and

Analysis Technology Co., Ltd.

702704, Block C, Tsinghua Unis Science

No.13 Langshan Rd.

Hi-Tech Industrial Park(north). Nanshan District, 518057

Shenzhen People's Ber

1. 2017年1月1日

SERVICE CENTER

Consair Corporation

Service Department

1 Cummings Point Rd.

Stamford, CT 06902

203-351-9000

For information on any Consir product call

1-800-3-CONAB or visit us on the web at

www.conair.com

[Non-Text]

Spanish translation is available on website

Please master this product at

www.conair.com/registration

©2020 Conair Corporation

Made in China

001075350

20PA075358

INFRARED THERMOMETER

FOREHEAD

FOREHEAD

CONAIRCARE®

Model ITH91